Elitech BT-3 Digital Hygrometer Thermometer Instruction Manual

Уводзіны

This manual provides comprehensive instructions for the Elitech BT-3 Digital Hygrometer Thermometer. This device is designed to accurately monitor both indoor and outdoor temperature, as well as indoor humidity levels, offering essential environmental data for various settings.

Асаблівасці прадукту

• Лічбавы тэрмометр: Monitors indoor and outdoor temperature in both Fahrenheit (℉) and Celsius (℃). The measuring range is -58℉ to +158℉.
• Humidity Monitor: Measures indoor relative humidity (RH) within a range of 20% to 99%RH.
• MAX & MIN Records: Automatically stores and displays the maximum and minimum recorded values for indoor/outdoor temperature and indoor humidity.
• Clock Function and Alarming Function: Features a switchable 12 or 24-hour clock display and a settable alarm time.
• Three Mounting Options: Designed for versatility with tabletop, wall-mountable, and magnet-mountable options, allowing convenient placement.
• Індыкатар паветранага камфорту: Displays the comfort level (DRY/COMFORT/WET) based on current indoor humidity, providing a quick assessment of air conditions.

Макет прылады

Малюнак 1: Фронт view of the Elitech BT-3 unit, showing the LCD display with indoor/outdoor temperature, time, and humidity readings. Dimensions are indicated as 111mm height, 101mm width, and 23.5mm depth. A "MAX/MIN" button is visible at the bottom.

Малюнак 2: Тыл view of the Elitech BT-3 unit, showing the battery compartment cover and control buttons: MODE, ADJ, CLEAR, RESET, and a ℃/℉ switch. A keyhole slot for wall mounting is also visible.

Малюнак 3: Тыл view of the Elitech BT-3 unit, illustrating the foldable kickstand for tabletop use and the attached outdoor temperature probe with its long cable.

Малюнак 4: Буйны план view of the open battery compartment on the back of the Elitech BT-3 unit, showing the slot for a AAA battery (not included).

Настройка

Ўстаноўка акумулятара

1. Locate the battery compartment cover on the back of the unit (refer to Figure 2).
2. Slide the cover off to open the compartment (refer to Figure 4).
3. Insert one AAA battery, ensuring the correct polarity (+/-) is observed. Note: Battery is not included.
4. Замяніце крышку батарэйнага адсека, ссунуўшы яе на месца.

Размяшчэнне зонда

The outdoor temperature probe is connected to the main unit via a long cable. For accurate outdoor temperature readings, place the probe outside in a location that is protected from direct sunlight, rain, and other extreme weather conditions. Ensure the cable is routed safely and does not interfere with windows or doors.

Варыянты мантажу

The BT-3 offers flexible placement options:

• Стальніца: Extend the foldable kickstand on the back of the unit (refer to Figure 3) to place it securely on any flat surface.
• Насценны: Utilize the keyhole slot on the back of the unit (refer to Figure 2) to hang it on a screw or nail on a wall.
• Magnet-Mountable: The unit features built-in magnets, allowing it to be conveniently attached to metallic surfaces such as refrigerators or metal cabinets.

Інструкцыя па эксплуатацыі

Уключэнне/выключэнне харчавання

The unit powers on automatically once the battery is installed. There is no dedicated power button. To turn off, remove the battery.

Temperature Unit Selection (℃/℉)

On the back of the unit, locate the small switch labeled "℃/℉" (refer to Figure 2). Slide this switch to toggle between Celsius and Fahrenheit temperature displays.

Ўстаноўка часу

1. Націсніце РЭЖЫМ button (on the back) to cycle through display modes until the current time is shown.
2. Націсніце і ўтрымлівайце РЭЖЫМ button until the hour digit begins to flash.
3. Выкарыстоўвайце прым button (on the back) to adjust the hour.
4. Прэса РЭЖЫМ again to move to the minute digit, then use прым каб скарэктаваць хвіліны.
5. Працягвайце націскаць РЭЖЫМ to set the 12-hour (AM/PM) or 24-hour format.
6. Прэса РЭЖЫМ one last time to confirm settings and exit time setting mode.

Налада будзільніка

1. Націсніце РЭЖЫМ button until the alarm time is displayed (often indicated by an alarm clock icon).
2. Націсніце і ўтрымлівайце РЭЖЫМ button until the alarm hour digit flashes.
3. Выкарыстоўвайце прым кнопку, каб наладзіць час будзільніка.
4. Прэса РЭЖЫМ again to move to the alarm minute digit, then use прым каб скарэктаваць хвіліны.
5. Прэса РЭЖЫМ one last time to confirm and exit alarm setting mode.
6. Каб уключыць або выключыць сігнал трывогі, націсніце кнопку прым button when the alarm time is displayed. An alarm icon will appear or disappear on the screen to indicate its status.

MAX/MIN Temperature and Humidity Records

Націсніце МАКС/МІН button (on the front of the unit) to view the maximum and minimum recorded indoor/outdoor temperatures and indoor humidity values.

• Націсніце МАКС/МІН button repeatedly to cycle through the current readings, maximum readings, and minimum readings.
• Каб ачысціць запісы MAX/MIN, націсніце і ўтрымлівайце кнопку ЯСНА button (on the back of the unit) while the MAX/MIN readings are displayed.

Індыкатар паветранага камфорту

The display includes an indicator that categorizes the indoor air comfort level based on humidity:

• СУХІ: Indicates that the indoor humidity level is low.
• КОМФОРТ: Indicates that the indoor humidity level is within an optimal and comfortable range.
• Мокрае: Indicates that the indoor humidity level is high.

Тэхнічнае абслугоўванне

• Уборка: Clean the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Замена батарэі: Replace the AAA battery when the low battery indicator appears on the display to ensure continuous and accurate operation.
• Сыход за зондам: Keep the outdoor probe clean and free from dirt, dust, and debris.
• Умовы навакольнага асяроддзя: Avoid exposing the unit to extreme temperatures, direct sunlight, or excessively high humidity for prolonged periods, as this can affect accuracy and lifespan.

Ліквідацыю непаладак

Няправільныя паказанні

• Размяшчэнне зонда: Ensure the outdoor probe is correctly positioned and not exposed to direct sunlight, heat sources, or moisture, which can skew readings.
• Час стабілізацыі: Allow the unit sufficient time (up to 30 minutes) to stabilize and provide accurate readings after initial setup or if it has been moved to a new environment.
• Узровень батарэі: Check the battery level and replace it with a fresh AAA battery if the indicator shows low power.

Дысплей не працуе

• Праверка батарэі: Verify that the battery is installed correctly with the proper polarity.
• Замена батарэі: Заменіце батарэю новай батарэяй ААА.
• Скід да заводскіх налад: If the display remains unresponsive, perform a factory reset by pressing the СКІД button on the back of the unit. This may require a small pointed object like a paperclip.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Elitech is committed to providing excellent customer service. The product comes with 24/7 US Technician Support available via email and phone.

For warranty claims, technical assistance, or any product-related inquiries, please contact Elitech customer service directly. Refer to the Elitech official webна сайце або ўпакоўцы прадукту, каб знайсці найбольш актуальную кантактную інфармацыю.

Elitech Company Overview

Гэта відэа дае агульны аглядview of Elitech Technology Inc., its vision, and its range of HVAC/R tools and manufacturing capabilities. It is not specific to the BT-3 product operation but offers insight into the brand's commitment to innovation.