Uponor Smatrix Base T-145 Wired Room Thermostat User Manual

1. Прадукт скончыўсяview

The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

Выява 1.1: Спераду view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.

2. Асноўныя магчымасці

• Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
• Адлюстраванне версіі праграмнага забеспячэння: Shows the software version upon startup.
• Экран з падсветкай: The display illuminates for 10 seconds after activation for improved visibility.
• Індыкатар ацяплення/астуджэння: Clearly displays the current operating mode.
• Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
• Setback Temperature Display: Shows the active setback temperature.
• Выбар адзінак вымярэння тэмпературы: Пераключэнне паміж градусамі Цэльсія і Фарэнгейта.
• Дысплей стану батарэі: Indicates the status of any internal backup battery or connected sensor batteries.
• Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
• Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.

3. Тэхнічныя характарыстыкі

4. Інфармацыя па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі па тэхніцы бяспекі перад устаноўкай або эксплуатацыяй гэтай прылады. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або пашкоджання маёмасці.

• Электрабяспека: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
• Умовы навакольнага асяроддзя: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
• Прызначэнне: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
• Уборка: Для чысткі выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.

5. Ўстаноўка і налада

The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.

5.1 Мантаж

1. Адключэнне сілкавання: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
2. Выбар месцазнаходжання: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
3. Праводка: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
4. Бяспечнае мацаванне: Use the provided mounting hardware to securely attach the thermostat to the wall.

5.2 Пачатковая налада

1. Уключэнне: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
2. Software Version Check: Upon initial power-up, the software version will briefly display.
3. Адзінка вымярэння тэмпературы: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
4. Канфігурацыя датчыка: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.

6. Аперацыя

The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.

6.1 Налада тэмпературы

• Rotate the central dial clockwise to increase the desired temperature.
• Rotate the central dial counter-clockwise to decrease the desired temperature.
• The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.

6.2 Адлюстраванне інфармацыі

• Бягучая тэмпература: The main display shows the current room temperature.
• Задаць тэмпературу: Briefly displayed when adjusting the dial.
• Рэжым працы: An icon or text indicates if the system is currently heating or cooling.
• Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
• Стан батарэі: Displays the status of any internal backup battery or connected sensor batteries.

6.3 Changing Temperature Units (Celsius/Fahrenheit)

Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.

7. Тэхнічнае абслугоўванне

The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.

• Уборка: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты, абразіўныя ачышчальнікі або празмерную вільготнасць.
• Праверка датчыка: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
• Праверка сістэмы: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.

8. Выпраўленне непаладак

If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.

9. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

вытворца: Упонор

Нумар мадэлі: 1086974

ASIN: B077CLZPJ8