LuxPower LP-BL300

Інструкцыя па эксплуатацыі камплекта веласіпедных ліхтароў LuxPower

Model: LP-BL300

1. Прадукт скончыўсяview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

LuxPower Bike Light Set, showing the black headlight with a clear lens and the rectangular taillight with multiple LEDs.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе пералічаныя ніжэй прадметы ўваходзяць у ваш пакет:

  • 1 x LuxPower LED Headlight (300 Lumens)
  • 1 x LuxPower LED Taillight
  • 2 х USB-кабеляў для зарадкі
  • 1 x Headlight Mounting Bracket
  • 1 x Taillight Mounting Strap
  • 1 х Кіраўніцтва карыстальніка
Contents of the LuxPower Bike Light Set package, including the headlight, taillight, two USB cables, and the user manual, all laid out next to the product box.

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. Настройка і ўстаноўка

3.1 Усталёўка фар

  1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
  2. Slide the LuxPower headlight onto the bracket until it clicks into place.
  3. Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic.
LuxPower headlight mounted on a bicycle handlebar, showing its position relative to the brake levers and shifters.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 Taillight Installation

  1. Wrap the taillight mounting strap around your bicycle's seat post.
  2. Secure the strap firmly, ensuring the taillight is facing directly backward.
  3. Adjust the position to ensure maximum visibility from the rear.
LuxPower taillight mounted on a bicycle seat post, positioned below the saddle.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне сілкавання

  • To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
  • To turn off the light, press and hold the power button again for 2 seconds.

4.2 Выбар рэжыму

Once the light is on, short press the power button to cycle through the available lighting modes:

  • Высокі: Maximum brightness for optimal visibility.
  • Сярэдні: Збалансаваная яркасць для агульнага выкарыстання.
  • Нізкі: Зніжаная яркасць для падаўжэння тэрміну службы батарэі.
  • Flash/Strobe: Flashing pattern for increased daytime visibility or emergency signaling.

4.3 Charging the Lights

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

  1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
  2. Акуратна адкрыйце гумовую заглушку.
  3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
  4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
  5. Пасля поўнай зарадкі адключыце кабель і шчыльна зачыніце гумовую заглушку, каб забяспечыць воданепранікальнасць.
Graphic showing both the headlight and taillight being charged via USB cables connected to a power source.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Close-up of the LuxPower headlight connected to a USB cable for charging.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Close-up of the LuxPower taillight connected to a USB cable for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. Тэхнічнае абслугоўванне

  • Уборка: Wipe the light units with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Сыход за батарэяй: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
  • захоўванне: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
  • Воданепранікальнасць: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца.Акумулятар разраджаны.Зарадзіце святло з дапамогай USB-кабеля, які ўваходзіць у камплект.
Святло не зараджае.Праблема з кабелем USB або крыніцай харчавання.Try a different USB cable or a different USB power source. Ensure the cable is fully inserted.
Святло нечакана мігціць або цьмянее.Нізкі акумулятар.Зарадзіць святло.
Mounting bracket feels loose.Bracket not tightened sufficiently.Ensure the bracket is securely tightened to the handlebar/seat post.

7. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаLuxPower
Нумар мадэліLP-BL300
Яркасць300 Lumens (Headlight)
Колькасць налад4 (High, Medium, Low, Flash/Strobe)
МатэрыялНержавеючая сталь
Узровень воданепранікальнасціВоданепранікальнасць (IPX6)
Тып мацаванняHandlebar Mount (Headlight), Seat Post Mount (Taillight)
UPC755702029490

8. Гарантыя і падтрымка

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webсайт.

Калі ласка, захавайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

© 2023 LuxPower. All rights reserved.