Project Source 11-Inch Flush Mount Light User Manual

Уводзіны

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай засцерагальніка або аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.

• Усе электрычныя падключэнні павінны адпавядаць мясцовым нормам, пастановам або Нацыянальнаму электрычнаму кодэксу (NEC).
• Пракансультуйцеся з кваліфікаваным электрыкам, калі вы не ўпэўнены ў працэсе ўстаноўкі.
• Не ўстанаўлівайце гэтую прыладу ў вільготных абоamp месцы.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Не перавышайце максімальную ватtage specified for this fixture.
• Асцярожна звяртайцеся са шклянымі кампанентамі, каб пазбегнуць іх разбіцця.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Інструкцыя па эксплуатацыі (гэты дакумент)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Настройка і ўстаноўка

Неабходныя інструменты (не ўключаны):

• Выкрутка для галоўкі Філіпс
• Сродкі для зачысткі правадоў
• Электраізаляцыйная стужка (неабавязкова)
• Ахоўныя акуляры

Этапы ўстаноўкі:

1. Выключыць харчаванне: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
2. Выдаліце ​​старую фурнітуру (калі ёсць): Carefully remove any existing light fixture, noting the wiring connections.
3. Падрыхтуйце праводку: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Падключыце правады:
   • Падключыце чорны провад ад прыстасавання да чорны (hot) wire from the ceiling box using a wire nut.
   • Падключыце белы провад ад прыстасавання да белы (neutral) wire from the ceiling box using a wire nut.
   • Падключыце зялёная або голая медзь ground wire from the fixture to the зялёная або голая медзь ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Мацаванне: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Аднавіць сілу: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Інструкцыя па эксплуатацыі

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Тэхнічнае абслугоўванне

Каб забяспечыць даўгавечнасць і знешні выгляд вашай свяцільні, выконвайце наступныя простыя правілы догляду:

• Уборка: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Сыход за шклом: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Без замены лямпачкі: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Ліквідацыю непаладак

If your light fixture is not functioning as expected, consult the following common issues and solutions:

If the problem persists after trying these solutions, contact a qualified electrician or customer support.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.