ALITOVE DC 12V 20A 240W Power Supply Instruction Manual

Уводзіны

This manual provides detailed instructions for the safe and efficient use of your ALITOVE DC 12V 20A 240W Power Supply. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Image: ALITOVE DC 12V 20A 240W Power Supply, showing its metal casing and terminal block.

Важныя інструкцыі па бяспецы

• Толькі для выкарыстання ў памяшканні: This power supply is designed for indoor use. Do not expose it to water, moisture, or high humidity.
• Кваліфікаваны персанал: Installation and wiring should only be performed by qualified personnel to prevent electric shock or damage.
• тtage Выбар: Before powering on, ensure the 110V/220V input voltage switch is correctly set for your region to avoid damaging the unit.
• Правільная вентыляцыя: The metal case has ventilation holes for heat dissipation. Ensure adequate airflow around the unit and do not block the vents.
• Зазямленне: Always connect the ground terminal (GND) to a proper earth ground.
• Шнур харчавання: A power cord is not included. Use an appropriate power cord for your region and application.
• Абарона ад перагрузкі: Do not exceed the maximum output current of 20A or power of 240W to prevent overload.

Image: Graphic depicting a power supply unit within a shield, symbolizing safety features.

Асаблівасці прадукту

• Уваходны кнtage: 110V/220V AC (selectable via switch).
• Выхад Voltage: DC 12V (adjustable by 15%).
• Выхадны ток: 20A maximum.
• Выходная магутнасць: 240 Вт максімум.
• Multiple Output Channels: Three sets of output terminals for connecting multiple devices.
• Аховы бяспекі: Аўтаматычнае адключэнне пры перагрузцы, перавышэнне напружанняtagэлектроннае адключэнне, аўтаматычнае цеплавое адключэнне і абарона ад кароткага замыкання.
• тtage Кансістэнцыя: Designed for stable voltage output without fluctuations.
• Ціхая праца: Fanless design ensures quiet running.
• Эфектыўнае рассейванне цяпла: Metal case with ventilation holes for effective cooling.

Image: Diagram highlighting key features including the 110V/220V switch, fanless design, multiple output channels, and smart IC for stable voltage and protection.

Змест пакета

Пакет уключае:

• 1 x ALITOVE DC 12V 20A 240W Power Supply

Note: A power cord is not included and must be purchased separately.

Настройка і ўстаноўка

1. Уваходны выпtagе Выбар

Before connecting any power, locate the red switch on the side of the unit. This switch allows you to select between 110V and 220V AC input. Ensure this switch is set to the correct voltage for your region to prevent damage to the power supply and connected devices.

Выява: Крупны план view of the red 110V/220V selector switch on the side of the power supply. Ensure this is set correctly before use.

2. Падключэнне правадоў

Refer to the terminal block on the power supply for wiring. Always ensure the power supply is disconnected from the AC mains before making any connections.

• Уваход пераменнага току: Connect your AC power cord to the L (Live) and N (Neutral) terminals.
• Зямля: Connect the earth ground wire to the GND terminal.
• Выход пастаяннага току: Connect your DC devices to the +V (positive) and COM (negative) terminals. There are three sets of output terminals for convenience.

Выява: Падрабязная view of the terminal block, indicating connections for AC input (L, N), Ground (GND), and DC output (+V, COM). An indicator light and voltage adjustment screw are also visible.

3. Выхад Voltagе Рэгуляванне

The DC 12V output voltage can be adjusted by approximately 15%. Use a small screwdriver to carefully turn the "V ADJ" potentiometer located near the output terminals. Turn clockwise to increase voltage, counter-clockwise to decrease. Monitor the output voltagз дапамогай мультыметра падчас рэгулявання.

Image: Close-up of the "V ADJ" screw for fine-tuning the output voltage.

Інструкцыя па эксплуатацыі

1. After completing all wiring connections and verifying the input voltage switch setting, connect the power supply to the AC mains.
2. The indicator light on the terminal block will illuminate, indicating the unit is powered on and providing DC output.
3. Ensure the total current draw of all connected devices does not exceed 20A and the total power does not exceed 240W.
4. The power supply is designed for continuous operation within its specified limits.

Image: Graphic comparing fluctuating voltagе да стабільнага абtage, emphasizing the power supply's consistent output.

Тэхнічнае абслугоўванне

• Уборка: Disconnect the power supply from the AC mains before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Вентыляцыя: Periodically check that the ventilation holes are not obstructed by dust or debris. Clean as necessary to maintain efficient heat dissipation.
• агляд: Regularly inspect the wiring connections for any signs of wear, corrosion, or loose connections.
• захоўванне: Захоўвайце блок сілкавання ў прахалодным сухім месцы, калі ён не выкарыстоўваецца.

Image: Graphic illustrating airflow through the perforated metal casing, highlighting the passive cooling design.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Image: Diagram showing the length (20cm/7.87in), width (11cm/4.33in), and height (5cm/1.96in) of the power supply unit.

Гарантыя і падтрымка

For warranty information or technical support, please refer to the ALITOVE official webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.

ALITOVE is committed to providing quality products and customer satisfaction. For further assistance, please visit: ALITOVE Store on Amazon