Kemper 170312 Adjustable High-Pressure LPG Regulator (1-4 Bar) Instruction Manual

1. Уводзіны

This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of the Kemper 170312 Adjustable High-Pressure LPG Regulator. This device is designed to regulate the pressure of Liquefied Petroleum Gas (LPG) from a high-pressure source to a stable output pressure adjustable between 1 and 4 bar, suitable for various gas appliances.

Please read this manual thoroughly before installation and use, and retain it for future reference. Incorrect installation or use can lead to serious injury or property damage.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: LPG is highly flammable and explosive. Always handle with extreme care.

• Installation and maintenance should only be performed by qualified personnel in accordance with local regulations and standards.
• Забяспечце дастатковую вентыляцыю ў зоне ўстаноўкі.
• Always check for gas leaks using a suitable leak detection spray or soapy water solution after installation and before each use. Never use an open flame to check for leaks.
• Do not modify the regulator or use it for purposes other than its intended design.
• Пераканайцеся, што ўсе злучэнні шчыльныя і надзейныя.
• Keep the regulator away from heat sources, open flames, and sparks.
• Replace the regulator if it shows signs of damage, wear, or if its service life has expired (refer to local regulations for replacement intervals).

3. Прадукт скончыўсяview

The Kemper 170312 regulator is designed for robust performance and precise pressure control. It features an inlet connection for the LPG source, an outlet connection for the appliance, and an adjustable knob for setting the desired output pressure.

Image shows the Kemper 170312 adjustable high-pressure LPG regulator. It features a main body with inlet and outlet connections, a blue central section, and a top adjustment knob. The knob has markings for 'L.P.G.', 'Type 52.2', 'Pd=1÷4 bar', 'P=max. 16 bar', 'Mg=12 Kg/h', 'EN 13785', and 'CE-0085B00473'.

4. Тэхнічныя характарыстыкі

5. Настройка і ўстаноўка

1. Падрыхтоўка: Ensure the gas cylinder valve is closed. Verify that the regulator, hose, and appliance are compatible and in good condition, free from damage or blockages.
2. Connect to Gas Cylinder: Attach the regulator's inlet connection securely to the gas cylinder valve. Use an appropriate wrench to tighten the connection, ensuring a gas-tight seal. Do not overtighten.
3. Падключэнне да прылады: Connect the regulator's outlet to the gas hose leading to your appliance. Ensure this connection is also tight and secure.
4. Тэст на герметычнасць: After all connections are made, slowly open the gas cylinder valve. Apply a leak detection spray or soapy water solution to all connections. Bubbles indicate a leak. If a leak is detected, immediately close the gas cylinder valve, tighten the connection, and re-test. If the leak persists, do not use the regulator and seek professional assistance.
5. Вентыляцыя: Always ensure the area is well-ventilated during installation and operation.

6. Інструкцыя па эксплуатацыі

1. Адкрытая падача газу: Slowly open the valve on the LPG cylinder.
2. Адрэгулюйце ціск: The regulator features an adjustment knob on top. Turn the knob clockwise to increase the output pressure and counter-clockwise to decrease it. Adjust to the pressure required by your appliance (between 1 and 4 bar). Some regulators may have markings or a pressure gauge to assist with setting.
3. Ignite Appliance: Follow your appliance's instructions for ignition.
4. Выключыць: To turn off the gas supply, first close the valve on the LPG cylinder. Allow the gas in the hose and regulator to burn off or dissipate, then turn off the appliance.

7. Тэхнічнае абслугоўванне

• Рэгулярны агляд: Periodically inspect the regulator and all connections for signs of wear, damage, cracks, or corrosion. Pay close attention to the hose for kinks or abrasions.
• Уборка: Clean the exterior of the regulator with a damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the gas passages.
• захоўванне: When not in use for extended periods, disconnect the regulator from the cylinder and store it in a clean, dry, and well-ventilated area, away from direct sunlight and extreme temperatures.
• Замена: Regulators have a limited lifespan. Consult local regulations or the manufacturer's recommendations for the appropriate replacement interval. Replace immediately if any damage is observed.

8. Выпраўленне непаладак

• Няма патоку газу:
  • Check if the gas cylinder valve is fully open.
  • Пераканайцеся, што газавы балон не пусты.
  • Verify all connections are secure and free of leaks.
  • Check if the regulator's adjustment knob is set to a pressure above 0 bar.
• Непаслядоўны ціск:
  • Ensure the regulator is correctly installed and not damaged.
  • Check for blockages in the hose or appliance.
• Gas Leak Detected:
  • Immediately close the gas cylinder valve.
  • Зацягніце ўсе злучэнні.
  • Re-test with leak detection spray. If the leak persists, discontinue use and replace the faulty component or seek professional help.

If you encounter issues not covered here or cannot resolve a problem, contact a qualified gas technician or the product supplier.

9. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі і тэхнічнай падтрымцы, звярніцеся да дакументацыі, прадстаўленай у месцы пакупкі, або звярніцеся да прадаўца. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.