YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P) User Manual

1. Уводзіны

This manual provides essential information for the installation, operation, and maintenance of your YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P). This unmanaged Ethernet switch is designed to provide Power over Ethernet (PoE) to compatible devices, simplifying network infrastructure by delivering both data and power over a single Ethernet cable. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. Інфармацыя па бяспецы

• Пераканайцеся, што аб'ём блока харчаванняtagадпавядае патрабаванням, указаным на этыкетцы прылады.
• Не адкрывайце прыладу casing. Унутры няма дэталяў, якія можа абслугоўваць карыстальнік.
• Пазбягайце размяшчэння выключальніка ў месцах з высокай вільготнасцю, экстрэмальнымі тэмпературамі або прамымі сонечнымі прамянямі.
• Забяспечце дастатковую вентыляцыю вакол выключальніка, каб прадухіліць перагрэў.
• Выкарыстоўвайце толькі адаптар сілкавання, які пастаўляецца з прыладай.
• Do not connect non-PoE devices to PoE ports if they are not designed to handle PoE input, as this may cause damage. This switch is designed to detect PoE devices, but caution is always advised.

3. Змесціва ўпакоўкі

Upon opening the package, please verify that all items are present and undamaged. If any items are missing or damaged, contact your vendor immediately.

• YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P)
• Адаптар сілкавання
• Кіраўніцтва карыстальніка (гэты дакумент)
• Mounting Accessories (if applicable, e.g., rubber feet, wall-mount kit)

4. Прадукт скончыўсяview

The YuanLey YS2082F-P is an unmanaged 8-port Power over Ethernet (PoE) switch with 2 dedicated uplink ports. It is designed for small to medium-sized networks requiring reliable power and data transmission to PoE-compatible devices such as IP cameras, VoIP phones, and wireless access points.

Заўвага адносна малюнкаў: The provided product data did not include specific images for the YS2082F-P model. Therefore, visual representations are omitted from this manual. Please refer to the physical product for exact port layouts and indicator locations.

4.1 Размяшчэнне пярэдняй панэлі

The front panel of the switch features the Ethernet ports and LED indicators. A general description is given below.

• PoE Ports (Ports 1-8): These 10/100Mbps RJ45 ports support IEEE 802.3af/at Power over Ethernet, providing both data and power to connected PoE devices.
• Uplink Ports (Ports 9-10): These 10/100Mbps RJ45 ports are used to connect the switch to a router, NVR, or another network switch. They do not provide PoE.
• Святлодыёдныя індыкатары:
  • Святлодыёд PWR: Indicates power status. (On: Power is supplied; Off: No power).
  • Святлодыёды Link/Act (на кожны порт): Indicates connection status and activity. (On: Link established; Blinking: Data activity; Off: No link).
  • Святлодыёд PoE Max: Indicates if the total PoE power budget is nearing its limit. (On: PoE power consumption is high; Off: Normal operation).

4.2 Кампаноўка задняй панэлі

The rear panel typically contains the power input and possibly grounding points. A general description is given below.

• Спажываная магутнасць: Connector for the external power adapter.
• Шруба зазямлення: (Optional) For connecting a grounding wire to protect against electrical surges.

5. Настройка

5.1 Фізічная ўстаноўка

1. Размяшчэнне: Place the switch on a stable, flat surface or mount it to a wall using appropriate mounting hardware (if included). Ensure the location is well-ventilated and away from heat sources, moisture, and direct sunlight.
2. Падключэнне сілкавання: Connect the provided power adapter to the switch's power input port, then plug the adapter into a standard AC power outlet. The PWR LED should illuminate.

5.2 Падключэнне сеткавых прылад

1. Падключэнне да сеткі: Use a standard Ethernet cable to connect one of the uplink ports (Ports 9 or 10) to your router, modem, or main network switch. The corresponding Link/Act LED should light up.
2. Падключэнне прылад PoE: Connect your PoE-compatible devices (e.g., IP cameras, VoIP phones) to any of the PoE ports (Ports 1-8) using standard Ethernet cables. The switch will automatically detect if the connected device is PoE-compatible and supply power. The corresponding Link/Act LED and PoE LED (if available per port) should light up.
3. Connect Non-PoE Devices: You can also connect non-PoE network devices (e.g., computers, NVRs without PoE input) to the PoE ports. The switch will provide data connectivity without supplying power.

Заўвага: This is an unmanaged switch, meaning no configuration is required. It operates as plug-and-play.

6. Інструкцыя па эксплуатацыі

The YuanLey YS2082F-P is an unmanaged switch, designed for ease of use. Once connected as described in the Setup section, it will automatically begin functioning.

6.1 Уключэнне харчавання

After connecting the power adapter, the switch will power on automatically. The PWR LED will illuminate, indicating that the device is receiving power.

6.2 Святлодыёдныя індыкатары

Monitor the LED indicators to understand the status of your network connections:

• Святлодыёд PWR: Зялёны колер свеціцца пастаянна, і перамыкач уключаны.
• Святлодыёды Link/Act:
  • Solid green: A stable network link is established on that port.
  • Blinking green: Data is being transmitted or received through that port.
  • Off: No device is connected, or the connected device is not powered on/not functioning correctly.
• Святлодыёд PoE Max: This LED indicates the overall PoE power consumption. If it lights up, it suggests that the total power drawn by connected PoE devices is approaching the switch's maximum power budget (120W). Consider reducing the number of high-power PoE devices or using a switch with a higher power budget if this LED remains on consistently.

6.3 Unmanaged Operation

As an unmanaged switch, the YS2082F-P requires no software configuration. It automatically handles network traffic, including auto-negotiation for speed and duplex mode, and auto MDI/MDIX for cable type detection. Simply plug in your devices, and the switch will manage the connections.

7. Тэхнічнае абслугоўванне

• Уборка: Для чысткі вонкавага боку перамыкача выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія або аэразольныя ачышчальнікі.
• Вентыляцыя: Пераканайцеся, што вентыляцыйныя адтуліны не заблакіраваны, каб прадухіліць перагрэў.
• Прашыўка: As an unmanaged switch, firmware updates are typically not required or available for user installation.
• Умовы навакольнага асяроддзя: Operate the switch within its specified temperature and humidity ranges to ensure optimal performance and longevity.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

YuanLey products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official YuanLey website. For technical support, troubleshooting assistance, or to report issues, please contact YuanLey customer service through the contact information provided on their official webсайт або ваша платформа для пакупак.

Інтэрнэт-рэсурсы: Каб атрымаць дадатковую інфармацыю, адказы на часта задаваныя пытанні і падтрымку, наведайце YuanLey Brand Store.