Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Уводзіны

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Інфармацыя па бяспецы

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

• Always disconnect power at the service panel before working with electrical wiring.
• Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
• Do not install in wet locations unless specifically rated for such use.
• Пераканайцеся, што ўсе правадныя злучэнні надзейныя і належным чынам ізаляваныя.
• Test the GFCI outlet monthly to ensure proper operation.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
• Крапежныя шрубы
• Інструкцыя па эксплуатацыі (гэты дакумент)

Note: A screwless wall plate is not included and must be purchased separately.

Ўстаноўка

Follow these steps for proper installation of your GFCI outlet:

1. Выключыць харчаванне: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltagэлектронны тэстар.
2. Выдаліць старую разетку: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
3. Вызначыць правады:
   • LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
   • LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
   • Правад зазямлення: Звычайна голая медь або зялёная ізаляцыя.
4. Connect Wires to GFCI:
   • Падключыце ЛІНІЯ wires to the terminals marked "LINE" on the GFCI outlet.
   • Падключыце ЗАГРУЗІЦЬ wires to the terminals marked "LOAD" on the GFCI outlet.
   • Падключыце провад зазямлення to the green ground screw.

   Важна: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.

5. Mount the Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
6. Усталяваць насценную пліту: Attach the screwless wall plate (not included) over the GFCI outlet.
7. Аднавіць сілу: Зноў уключыце сілкаванне на аўтаматычным выключальніку.

Выява: спераду view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Аперацыя

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

• Кнопка скіду: After installation or a power outage, press the red RESET button to restore power to the outlet.
• Кнопка ТЭСТ: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Штомесячнае тэставанне:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

1. Штэпсель алamp or other device into the GFCI outlet and turn it on.
2. Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
3. Press the red RESET button. The lamp should turn back on.
4. Калі лamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Тэхнічнае абслугоўванне

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

• Keep the outlet clean and free from dust and debris.
• Do not paint over the GFCI outlet or its buttons, as this can impair operation.
• If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: 1597TRW
• Марка: Легран
• колер: Белы
• Ampэраж: 15 Amps
• тtage: 125 вольт
• Агульная магутнасць разетак: 2
• Тып раздыма: Нэма 5-15
• матэрыял: Метал
• Асаблівасці: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
• UPC: 680147085438
• ASIN: B079LTP7Y5

Гарантыя і падтрымка

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webсайт або ўпакоўка прадукту.