TC Electronic FLUORESCENCE SHIMMER REVERB

TC Electronic FLUORESCENCE SHIMMER REVERB Pedal User Manual

Model: FLUORESCENCE SHIMMER REVERB

Уводзіны

The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.

TC Electronic FLUORESCENCE SHIMMER REVERB pedal, top-down view showing four control knobs and footswitch.

Малюнак 1: Верх view of the FLUORESCENCE SHIMMER REVERB pedal.

  • Shimmering Reverb: Creates bright, ethereal reverb effects.
  • Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
  • Сапраўдны абыход: Ensures ultimate signal integrity when the effect is disengaged.
  • Трывалая канструкцыя: Features a robust metal chassis for roadworthy reliability.

Настройка

Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:

  1. Падключэнне сілкавання: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
  2. Уваходнае злучэнне: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
  3. Выходнае злучэнне: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your amplifier or the next effect pedal in your signal chain.
  4. Размяшчэнне: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
Тыл view of the TC Electronic FLUORESCENCE SHIMMER REVERB pedal showing input, output, and power jacks.

Малюнак 2: Задняя частка view showing input, output, and power connections.

Кіраванне педаллю

The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:

Close-up of the TC Electronic FLUORESCENCE SHIMMER REVERB pedal's control knobs: Reverb, Mix, Tone, Shimmer.

Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.

  • Ручка рэверберацыі: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
  • Ручка MIX: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
  • Ручка TONE: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
  • SHIMMER Knob: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
  • Нажны пераключальнік: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:

  • Уборка: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
  • захоўванне: Захоўвайце педаль у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
  • Сувязі: Перыядычна правярайце ўсе кабельныя злучэнні на наяўнасць зносу. Пераканайцеся, што раздымы чыстыя і без пылу і смецця.
  • крыніца харчавання: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
  • Фізічны догляд: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.

Ліквідацыю непаладак

If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:

праблемаМагчымая прычынаРашэнне
Няма гуку або слабы сігналIncorrect cable connections, faulty cables, no power, pedal disengaged.Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect.
Няма эфекту рэверберацыіMIX knob set too low, REVERB knob set too low, pedal disengaged.Increase the MIX and REVERB knob settings. Ensure the pedal is engaged.
Непажаданы шум або гулFaulty power supply, ground loop, interference from other pedals/equipment.Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition.
Shimmer effect is too subtle or too intenseSHIMMER knob setting.Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character.

Тэхнічныя характарыстыкі

  • мадэль: FLUORESCENCE SHIMMER REVERB
  • ASIN: B079Y519PH
  • Вага прадмета: 1.1 фунта (0.5 кілаграма)
  • Памеры прадукту: 5.2 х 2.91 х 2.28 цалі
  • Матэрыял корпуса: Метал
  • колер: Сіні
  • Тып раздыма: Аўдыёраздым 1/4 цалі (6.35 мм)
  • Hardware Interface: 1/4-цалевы аўдыё
  • Крыніца харчавання: Правадная электрычная
  • тtage: 9V DC (100mA, center negative recommended)
  • Дата першай даступнасці: 27 лютага 2018 г

Гарантыя і падтрымка

TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

Для атрымання дадатковай дапамогі наведайце TC Electronic Store on Amazon.