1. Уводзіны
This manual provides essential information for the safe and effective use of the SKF LAGD 60/WA2 Multi-Purpose EP Type Grease. This product is designed for use in various industrial applications, often employed within automatic lubricators such as the SKF SYSTEM 24, to ensure consistent and reliable lubrication. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.
2. Інфармацыя па бяспецы
WARNING: Potential Electrostatic Charging Hazard. See instructions.
- Always wear appropriate personal protective equipment (PPE), including gloves and eye protection, when handling lubricants.
- Пазбягайце працяглага кантакту са скурай. Пасля выкарыстання старанна вымыйце рукі.
- Не глынаць. Пры праглынанні неадкладна звярніцеся па медыцынскую дапамогу.
- Store in a cool, dry place, away from direct sunlight and sources of ignition.
- Dispose of used grease and containers according to local environmental regulations.
- Забяспечце належную вентыляцыю пры працы ў закрытых памяшканнях.
- Refer to the Safety Data Sheet (SDS) for comprehensive safety information.
3. Прадукт скончыўсяview
The SKF LAGD 60/WA2 is a high-quality, multi-purpose EP (Extreme Pressure) type grease. It is formulated to provide excellent lubrication and protection for various industrial components, particularly in applications requiring resistance to heavy loads and wear. This grease is commonly supplied in cartridges designed for use with automatic lubricators, ensuring a continuous and controlled supply of lubricant to critical points.
Малюнак 1: SKF LAGD 60/WA2 Multi-Purpose EP Type Grease container. This image displays the SKF LAGD 60/WA2 Multi-Purpose EP Type Grease in its transparent container, featuring a blue cap and a red dispensing nozzle. The label indicates 'SKF SYSTEM 24 Automatic lubricator' and 'LAGD 60/WA2'.
4. Настройка
The SKF LAGD 60/WA2 grease is typically used with an automatic lubricator system, such as the SKF SYSTEM 24. Proper setup ensures efficient and consistent lubrication.
4.1 Preparing the Lubricator
- Ensure the application point is clean and free from old grease or contaminants.
- Remove the protective cap from the grease cartridge.
- Insert the grease cartridge into the automatic lubricator unit, ensuring it is seated correctly.
- Attach the lubricator to the designated lubrication point, ensuring a secure connection.
4.2 Visual Guide to SKF SYSTEM 24 Automatic Lubricator
Відэа 1: SKF SYSTEM 24 Automatic Lubricator Overview. This video provides a visual guide to the SKF SYSTEM 24 Automatic Lubricator, showcasing its design, the grease cartridge, and the adjustable dial for setting the discharge period. It illustrates the physical aspects of the lubricator, which is designed to dispense grease like the LAGD 60/WA2.
5. Інструкцыя па эксплуатацыі
Once the SKF LAGD 60/WA2 grease cartridge is installed in an automatic lubricator, the discharge period needs to be set.
- Identify the setting dial on the top of the automatic lubricator unit.
- Rotate the dial to select the desired discharge period (e.g., 1, 3, 6, 9, or 12 months). The red indicator on the dial should align with the chosen number.
- Once set, the lubricator will begin to dispense grease automatically over the selected period.
- Monitor the transparent body of the lubricator to observe the grease level and ensure proper operation.
6. Тэхнічнае абслугоўванне
Regular maintenance ensures the longevity of your equipment and the effectiveness of the lubrication system.
- Візуальны агляд: Periodically check the lubricator and the application point for any signs of leakage, damage, or blockages.
- Grease Level Monitoring: Observe the grease level through the transparent container. Replace the cartridge when it is empty or nearing depletion.
- Замена картрыджа: When replacing an empty cartridge, ensure the new SKF LAGD 60/WA2 cartridge is installed correctly as per the setup instructions.
- Уборка: Keep the exterior of the lubricator clean to prevent dirt and debris from entering the system.
7. Выпраўленне непаладак
If you encounter issues with your SKF automatic lubricator using LAGD 60/WA2 grease, consider the following:
- No Grease Discharge:
- Check if the cartridge is empty and needs replacement.
- Ensure the discharge period dial is correctly set and not on '0'.
- Verify that the application point is not blocked.
- Confirm the ambient temperature is within the operating range for the lubricator and grease.
- Excessive Grease Discharge:
- Check the discharge period setting; it might be set too short for the application.
- Inspect for any damage to the lubricator unit that might cause uncontrolled release.
- Уцечка:
- Пераканайцеся, што ўсе злучэнні шчыльныя і надзейныя.
- Inspect the cartridge and lubricator housing for cracks or damage.
If problems persist, contact SKF technical support.
8. Тэхнічныя характарыстыкі
Key specifications for the SKF LAGD 60/WA2 Multi-Purpose EP Type Grease and related packaging:
| Асаблівасць | Дэталь |
|---|---|
| Марка | SKF |
| Нумар мадэлі тавару | LAGD 60/WA2 |
| Інфармацыя аб пакеце | Бутэлька |
| Аб'ём вадкасці | 60 мілілітраў |
| Колькасць адзінак | 2.0 вадкіх унцый |
| Памеры ўпакоўкі | 10.08 х 4.57 х 3.5 цалі |
| Вага прадмета | 2.87 фунта |
| ASIN | B079Y5P192 |
| Дата першай даступнасці | 26 кастрычніка 2022 г |
9. Гарантыя і падтрымка
For specific warranty information regarding the SKF LAGD 60/WA2 Multi-Purpose EP Type Grease, please refer to the official SKF website or contact your authorized SKF distributor. SKF products are manufactured to high-quality standards, and support is available for product-related inquiries.
For technical assistance, product data sheets, or further information, please visit the official SKF website or contact SKF customer service.
