WOBANE Under Cabinet LED Strip Light Kit

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOBANE Under Cabinet LED Strip Light Kit. This kit is designed to provide efficient and warm white illumination (2700K) for various indoor applications such as cabinets, cupboards, desks, shelves, and more. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у вашай упакоўцы:

• 4 x LED Light Bars (20 inches each)
• 1 x Power Adapter (ETL Listed, 12V DC)
• 1 x In-line On/Off Switch
• Connectors (various types for straight and angled connections)
• Трымальнікі кабеляў

3. Тэхнічныя характарыстыкі прадукту

4. Важныя інструкцыі па бяспецы

• Прачытайце ўсе інструкцыі перад выкарыстаннем прадукту.
• Гэты прадукт прызначаны для толькі для выкарыстання ў памяшканніНе падвяргайце ўздзеянню вады або высокай вільготнасці.
• Перад устаноўкай або тэхнічным абслугоўваннем пераканайцеся, што крыніца харчавання адключаны.
• Выкарыстоўвайце толькі прадастаўлены адаптар сілкавання. Выкарыстанне несумяшчальнага адаптара можа пашкодзіць прадукт або стварыць небяспеку пажару.
• Do not cut the LED strips unless specifically instructed and at designated cut marks. Improper cutting can damage the strip and void the warranty.
• Avoid bending the LED strips sharply, especially at connection points, to prevent damage to the circuit.
• Захоўваць у месцах, недаступных дзецям.
• If any part of the product is damaged, discontinue use immediately and contact customer support.

5. Кіраўніцтва па ўстаноўцы

Follow these steps for a simple and secure installation:

5.1. Падрыхтоўка паверхні

Before attaching the LED strips, ensure the installation surface is clean, dry, and smooth. Wipe the area with a clean cloth to remove dust, grease, or moisture. This will ensure optimal adhesion of the tape.

Figure 5.1: Clean the installation surface thoroughly before applying the LED strips.

5.2. Attaching LED Strips

1. Carefully peel off the protective backing from the adhesive tape on the back of each LED light bar.
2. Press the LED strip firmly onto the desired surface. Apply even pressure along the entire length to ensure good contact.

5.3. Злучэнне кампанентаў

Connect the LED light bars to each other and to the power adapter using the provided connectors and the in-line switch. Ensure all connections are secure.

Figure 5.2: Use the provided connectors to link multiple LED light bars.

Use the included cable holders to manage and secure any loose wiring, keeping the installation neat and tidy. Connect the in-line switch and power adapter to the assembled LED strips, then plug the adapter into a standard electrical outlet.

Figure 5.3: Secure cables with cable holders for a clean installation.

5.4. Customizing Layout with Connectors

The kit includes flexible connectors that allow for versatile installation around corners or across gaps between surfaces. These connectors ensure a continuous lighting effect even in complex layouts.

Figure 5.4: Flexible connectors enable seamless corner installations.

Figure 5.5: Achieve various angles with the flexible connectors.

6. Аперацыя

Once installed and connected to power, operate the WOBANE LED Strip Light Kit using the in-line switch. Simply toggle the switch to turn the lights ON or ВЫКЛ.

7. Тэхнічнае абслугоўванне

To maintain the performance and appearance of your LED strip lights:

• Перад чысткай пераканайцеся, што сілкаванне адключана.
• Wipe the LED strips and other components with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Пазбягайце прамога кантакту з вадой.

8. Выпраўленне непаладак

9. Гарантыя і падтрымка

For warranty information or technical support, please refer to the product packaging or contact WOBANE customer service directly. Keep your purchase receipt as proof of purchase.