Кіраўніцтва карыстальніка Smart Torch

Уводзіны

Дзякуй за пакупкуasing the Smart Torch, Model ST-1000. This manual provides essential information for the safe and efficient use of your new device. Please read this manual thoroughly before operating the Smart Torch and retain it for future reference.

The Smart Torch is designed to provide powerful illumination with smart features, including adjustable brightness, multiple light modes, and app connectivity for enhanced control.

Інфармацыя па бяспецы

Please observe the following safety precautions to prevent injury or damage to your Smart Torch:

• Не глядзіце прама на прамень святла. The intense light can cause temporary vision impairment or eye damage.
• Keep the device away from water and moisture. This product is not waterproof unless explicitly stated on the packaging.
• Do not disassemble, modify, or attempt to repair the Smart Torch. This will void the warranty and may cause damage or injury.
• Use only the specified charging cable and adapter. Incorrect charging equipment may damage the battery or cause fire.
• Захоўваць у месцах, недаступных для дзяцей. Дробныя дэталі могуць утвараць небяспеку ўдушша.
• Avoid extreme temperatures. Do not expose the device to direct sunlight for prolonged periods or store it in very hot or cold environments.
• Утылізуйце прыладу і яе акумулятар адказна ў адпаведнасці з мясцовымі правіламі.

Змест пакета

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• Smart Torch (Model ST-1000)
• Зарадны кабель USB-C
• наручныя талреп
• Кіраўніцтва карыстальніка (гэты дакумент)

Прадукт скончаныview

Familiarize yourself with the components of your Smart Torch:

1. Аб'ектыў: The primary light source.
2. Кнопка харчавання / рэжыму: Used to turn the torch on/off and cycle through light modes.
3. Порт зарадкі (USB-C): Located under a protective cover, used for charging the internal battery.
4. Індыкатар батарэі: Small LEDs indicating battery charge level.
5. Lanyard Attachment Point: For securing the wrist lanyard.

Note: No product images are available for display in this manual.

Настройка

1. Пачатковая зарадка

Before first use, fully charge your Smart Torch:

1. Адкрыйце ахоўную крышку зараднага порта USB-C.
2. Connect the provided USB-C cable to the torch and the other end to a USB power adapter (not included) or a computer USB port.
3. Індыкатары батарэі будуць паказваць працэс зарадкі. Усе індыкатары будуць гарэць пастаянна, калі батарэя цалкам зараджана.
4. Звычайна зарадка займае 3-4 гадзін.

2. Усталёўка праграмы (неабавязкова)

For advanced features and control, download the "Smart Torch Connect" app:

• Scan the QR code on the product packaging or search for "Smart Torch Connect" in your device's app store (iOS/Android).
• Усталюйце праграму і выконвайце інструкцыі на экране, каб стварыць уліковы запіс або ўвайсці ў сістэму.

3. Pairing with App (Optional)

To connect your Smart Torch to the app:

1. Пераканайцеся, што Bluetooth уключаны на вашым смартфоне.
2. Turn on the Smart Torch.
3. Open the "Smart Torch Connect" app. The app will automatically search for nearby devices.
4. Select "ST-1000" from the list of found devices to pair.
5. Once paired, you can control the torch via the app.

Інструкцыя па эксплуатацыі

1. Асноўная аперацыя

• Уключыць/выключыць: Націсніце і ўтрымлівайце кнопку харчавання/рэжыму на працягу 2 секунд.
• Change Brightness/Mode: While the torch is on, short press the Power/Mode Button to cycle through brightness levels (Low, Medium, High) and special modes (Strobe, SOS).
• Direct High Mode: Double-press the Power/Mode Button quickly from any state (on or off) to activate the highest brightness mode instantly. Double-press again to return to the previous state or turn off.

2. App Control (if paired)

When connected to the "Smart Torch Connect" app, you can:

• Adjust brightness with a slider for fine control.
• Select specific light modes (e.g., Reading, Camping, Emergency).
• Schedule turn on/off times.
• Сачыце за станам батарэі.
• Customize button functions (advanced users).

Note: No official product videos are available for display in this manual.

Тэхнічнае абслугоўванне

• Уборка: Use a soft, dry cloth to wipe the exterior of the torch. Do not use abrasive cleaners or solvents. For the lens, use a lens cleaning cloth.
• Сыход за батарэяй: To prolong battery life, avoid fully discharging the battery frequently. Recharge the torch when the battery indicator shows low power. If storing for a long period, charge the battery to about 50% every 3-6 months.
• захоўванне: Store the Smart Torch in a cool, dry place away from direct sunlight and extreme temperatures.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: СТ-1000
• Крыніца святла: High-efficiency LED
• Яркасць: Да 1200 люмен (макс.)
• акумулятар: Акумулятарная літый-іённая батарэя (напрыклад, 2600 мАг)
• Порт для зарадкі: USB-C
• Падключэнне: Bluetooth 5.0
• Памеры: Approx. 120mm x 25mm (Length x Diameter)
• Вага: Прыбл. 150 г
• матэрыял: Aircraft-grade Aluminum Alloy

Гарантыя і падтрымка

Інфармацыя аб гарантыі

The Smart Torch (Model ST-1000) comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Калі ласка, захавайце доказы пакупкі для прэтэнзій па гарантыі.

Падтрымка кліентаў

If you encounter any issues or have questions regarding your Smart Torch, please contact our customer support team:

• электронная пошта: support@smarttorch.com
• тэлефон: 1-800-555-SMART (Mon-Fri, 9 AM - 5 PM EST)
• Webсайт: www.smarttorch.com/support

When contacting support, please have your product model (ST-1000) and purchase date ready.