Lowrance HOOK2 9" Bracket User Manual

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance HOOK2 9" Gimbal Bracket. Please read these instructions carefully before proceeding with installation to ensure correct usage and to prevent damage to the product or associated equipment.

2. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Lowrance HOOK2 9" Gimbal Bracket
• Two (2) Gimbal Knobs with threaded posts
• Four (4) Mounting Screws

The image displays the Lowrance HOOK2 9-inch gimbal bracket, a black U-shaped mounting accessory. It includes two large black thumb screws with metal posts and four smaller silver screws, which are the necessary hardware for installation.

3. Настройка і ўстаноўка

The gimbal bracket allows for secure mounting and adjustable viewing angles for your Lowrance HOOK2 9" display unit.

3.1 Мантаж кранштэйна

1. Выберыце месца: Choose a flat, stable surface on your vessel that provides optimal viewing and access to the display unit, ensuring it is clear of obstructions.
2. Пазначце адтуліны для свідравання: Position the gimbal bracket in the desired location. Use a pencil or marker to mark the four mounting points on the surface through the holes in the bracket's base.
3. Прасвідраваць пілотныя адтуліны: Using an appropriate drill bit size for the provided mounting screws, carefully drill pilot holes at the marked locations. Ensure the depth of the holes does not exceed the screw length.
4. Замацуеце кранштэйн: Place the gimbal bracket over the pilot holes and secure it firmly using the four provided mounting screws. Do not overtighten.

3.2 Attaching the Display Unit

1. Выраўнаваць дысплей: Position your Lowrance HOOK2 9" display unit between the arms of the installed gimbal bracket, aligning the mounting holes on the sides of the display with the holes on the bracket arms.
2. Insert Knobs: Insert the threaded posts of the two gimbal knobs through the bracket arms and into the corresponding mounting holes on the display unit.
3. Tighten Knobs: Hand-tighten the gimbal knobs until the display unit is securely held in place but still allows for adjustment.

4. Аперацыя

Once installed, the gimbal bracket allows for easy adjustment of your display unit's viewкут нахілу.

4.1 Рэгуляванне Viewing кут

1. Loosen Knobs: Slightly loosen both gimbal knobs by turning them counter-clockwise. Do not remove them completely.
2. Наладзіць кут: Tilt the display unit to your desired viewкут нахілу.
3. Бяспечны кут: Hand-tighten both gimbal knobs by turning them clockwise until the display unit is firmly held in the new position. Ensure both knobs are tightened equally to prevent uneven stress on the bracket.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and proper function of your gimbal bracket.

• Уборка: Clean the bracket periodically with a soft, damp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
• агляд: Routinely check all mounting screws and gimbal knobs for tightness. Re-tighten if necessary. Inspect the bracket for any signs of wear, corrosion, or damage.
• захоўванне: If the display unit and bracket are removed for storage, store them in a dry, protected environment.

6. Выпраўленне непаладак

У гэтым раздзеле разглядаюцца распаўсюджаныя праблемы, з якімі вы можаце сутыкнуцца.

6.1 Display Unit is Loose or Sways

• рашэнне: Ensure both gimbal knobs are fully tightened. If the issue persists, check if the display unit's mounting holes or the bracket's arms are damaged.

6.2 Difficulty Adjusting Angle

• рашэнне: Loosen the gimbal knobs slightly more. If the movement is still stiff, inspect for any debris or obstruction in the pivot points. Do not force the adjustment.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For information regarding product warranty, please refer to the documentation included with your original purchase or visit the official Lowrance website. For technical support or further assistance, please contact Lowrance customer service directly.