Уводзіны
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Kripsol Koral Series filtration pump. Designed for private pools of medium and small sizes, this self-priming pump offers high resistance and energy efficiency.
All plastic parts are made from NORYL thermoplastic material, ensuring durability. The pump features a perforated plastic filter basket and a transparent polycarbonate lid for easy visibility of debris. It is secured with AISI 304 stainless steel folding knobs and an O-ring seal.
Асноўныя характарыстыкі:
- Improved and reinforced Kripsol Koral model.
- Self-priming design for easy startup.
- High resistance and energy efficiency.
- NORYL thermoplastic construction for plastic components.
- Transparent polycarbonate lid for filter basket visibility.
- Suitable for seawater applications.
- Клас абароны: IP 55.
- Insulation class: F.
Інфармацыя па бяспецы
Please read all safety warnings and instructions carefully before installing, operating, or performing maintenance on the pump. Failure to follow these instructions can result in serious injury or property damage.
- Заўсёды адключайце харчаванне помпы перад выкананнем любога абслугоўвання або тэхнічнага абслугоўвання.
- Installation must be performed by a qualified professional in accordance with local electrical and plumbing codes.
- Ensure the pump is installed in a well-ventilated area, protected from direct sunlight and extreme weather conditions.
- Do not operate the pump if it is damaged or if any electrical components are exposed to water.
- Keep children and pets away from the pump area during operation.
- The pump is designed for water filtration; do not use it for pumping flammable liquids or chemicals.
Прадукт скончаныview
Малюнак 1: Спераду view of the Kripsol Koral Series Filtration Pump. This image shows the main body of the pump, the transparent lid of the pre-filter basket, and the motor housing.
Figure 2: Kripsol Koral Series Filtration Pump positioned next to a swimming pool. This image illustrates the typical installation environment for the pump, showing its compact size relative to a pool deck.
The Kripsol Koral Series pump consists of a robust motor, a self-priming pump body, a large pre-filter basket with a transparent lid, and inlet/outlet connections. The transparent lid allows for easy visual inspection of the filter basket's cleanliness without needing to open the pump.
Настройка і ўстаноўка
Proper installation is crucial for the pump's performance and longevity. Consult a qualified professional for installation if you are unsure.
1. Выбар месца
- Choose a dry, well-ventilated area, protected from direct sunlight, rain, and flooding.
- The pump should be installed as close to the pool as possible and below water level for optimal self-priming.
- Ensure sufficient space around the pump for ventilation and future maintenance.
2. Mounting the Pump
- Усталюйце помпу на трывалай, роўнай аснове, каб пазбегнуць вібрацыі і шуму.
- Secure the pump using appropriate fasteners through the mounting holes in the base.
3. Сантэхнічныя злучэнні
- Connect the suction line from the pool skimmer/main drain to the pump's inlet (usually the larger port).
- Connect the discharge line from the pump's outlet to the pool filter system.
- Use appropriate PVC fittings and ensure all connections are watertight using thread sealant or Teflon tape.
- Install isolation valves on both suction and discharge lines to facilitate future maintenance.
4. Электрычнае падключэнне
- All electrical wiring must comply with local codes and regulations.
- Пераканайцеся, што крыніца харчавання адпавядае магутнасці помпыtage requirements (e.g., 230V AC).
- Connect the pump to a dedicated circuit protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD).
- Правільнае зазямленне мае важнае значэнне для бяспекі.
Інструкцыя па эксплуатацыі
1. Запраўка помпы
Before starting the pump for the first time, or after draining the system, it must be primed:
- Ensure all valves are open to allow water flow to the pump.
- Remove the transparent lid of the pre-filter basket by unscrewing the knobs.
- Fill the pre-filter basket completely with water until it overflows.
- Replace the lid and tighten the knobs securely to ensure an airtight seal.
- Turn on the pump. The pump should begin to draw water and expel air from the system.
- If the pump does not prime within a few minutes, turn it off, re-prime, and check for air leaks in the suction line.
2. Запуск і прыпынак
- Пачаць: Ensure the pump is primed and all necessary valves are open. Turn on the power switch.
- Спыніць: Выключыце сілкаванне.
3. Звычайная праца
The pump should operate smoothly with a consistent flow of water. Monitor the pressure gauge on your filter (if applicable) to ensure it is within the normal operating range. An increase in pressure may indicate a dirty filter or pre-filter basket.
Тэхнічнае абслугоўванне
Regular maintenance ensures optimal performance and extends the life of your Kripsol pump.
1. Ачыстка кошыка папярэдняй фільтрацыі
The pre-filter basket should be inspected regularly (daily or weekly depending on pool usage and debris) and cleaned as needed.
- Выключыце помпу і адключыце электраэнергію.
- Close the isolation valves on the suction and discharge lines to prevent water from draining from the pool.
- Unscrew the knobs and remove the transparent lid.
- Выміце фільтруючы кошык.
- Empty any debris and rinse the basket thoroughly with a garden hose.
- Праверце ўшчыльняльнае кольца на вечку на наяўнасць расколін або зносу. Пры неабходнасці замяніце.
- Place the clean basket back into the pump housing.
- Ensure the O-ring is properly seated, then replace the lid and tighten the knobs securely.
- Open the isolation valves and re-prime the pump if necessary before restarting.
2. Падрыхтоўка да зімы (пры неабходнасці)
In regions with freezing temperatures, the pump must be properly winterized to prevent damage.
- Drain all water from the pump by removing the drain plugs (if present) or disconnecting plumbing.
- Захоўвайце помпу ў сухім, абароненым ад марозу месцы або належным чынам накрыйце яе, калі яна застаецца ўсталяванай.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Помпа не запускаецца | No power; tripped breaker/GFCI; faulty motor. | Check power supply; reset breaker/GFCI; consult qualified technician. |
| Помпа працуе, але вада не цячэ | Pump not primed; air leak in suction line; clogged pre-filter basket; closed valve. | Re-prime the pump; check all suction line connections for leaks; clean pre-filter basket; open all valves. |
| Нізкі расход вады | Dirty pre-filter basket; dirty main filter; air leak; restricted suction. | Clean pre-filter basket; backwash/clean main filter; check for air leaks; clear any obstructions in suction line. |
| Празмерны шум/вібрацыя | Air in pump; cavitation; loose mounting; worn bearings. | Ensure pump is primed and no air leaks; check for restricted flow; tighten mounting bolts; consult technician for bearing issues. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | Kripsol |
| мадэль | KS33M (Koral Series) |
| Хуткасць патоку | 4.8 м³/г |
| Тып матэрыялу | Plastic (NORYL thermoplastic) |
| Крыніца харчавання | Правадная электрычная |
| Клас абароны | IP 55 |
| Клас ізаляцыі | F |
| Колер | Transparent (for lid) |
| стыль | Self-priming, Filtering |
| Seawater Compatible | так |
Гарантыя і падтрымка
For information regarding warranty coverage, technical support, or spare parts, please contact your authorized Kripsol dealer or the seller from whom you purchased the product. Keep your proof of purchase for warranty claims.
Інфармацыя аб прадаўцу: PISCINAYSPA
For general inquiries about Kripsol products, you may visit the official Kripsol webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.