Link2Home EM-BL268B

Link2Home EM-BL268B LED Battery Operated Security Floodlight User Manual

Model: EM-BL268B

Важная інфармацыя па бяспецы

Please read and understand all instructions before installing and operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.

  • Пераканайцеся, што паверхня для мацавання мае трывалую канструкцыю і можа вытрымаць вагу прыстасавання.
  • Не змешвайце старыя і новыя батарэі. Не змешвайце шчолачныя, стандартныя (вугляродна-цынкавыя) або акумулятарныя (нікель-кадміевыя) батарэі.
  • Утылізуйце батарэі належным чынам у адпаведнасці з мясцовымі правіламі.
  • This product is designed for outdoor use. Ensure all seals and covers are properly secured to maintain water resistance.
  • Не глядзіце непасрэдна ў святлодыёдную крыніцу святла, калі яна падсвятляецца.
  • Захоўваць у месцах, недаступных дзецям.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя.

  • 1x Link2Home EM-BL268B Dual-Head Sensor Floodlight
  • Мантажныя прыналежнасці (шрубы, дзюбелі для сцяны)
  • Batteries (as specified)
  • Кіраўніцтва па эксплуатацыі
Link2Home EM-BL268B Dual-Head Sensor Floodlight, front view

Выява: спераду view of the Link2Home EM-BL268B Dual-Head Sensor Floodlight, showing the two adjustable light heads and the motion sensor below.

Асаблівасці прадукту

The Link2Home EM-BL268B floodlight offers advanced features for reliable outdoor security lighting.

  • 330 Lumen LED Output: Provides bright illumination for security and visibility.
  • Працуе ад батарэі: Cordless design for flexible installation without wiring.
  • Adjustable Dual-Heads: Two light heads can be independently adjusted to cover desired areas.
  • 140° Motion Sensor: Detects movement up to 40 feet away.
  • Photocell Technology: Ensures the light only activates in low-light conditions to conserve battery life.
  • Воданепранікальнасць: Прызначаны для выкарыстання на вуліцы ў розных умовах надвор'я.
  • Adjustable Run Time: Light duration can be set from 3 seconds to 7 minutes after motion detection.
Link2Home EM-BL268B Floodlight with feature icons: 140 degree motion sensor, 330 lumen, water resistant, 2 lux, 3s-7mins run time

Image: The Link2Home EM-BL268B floodlight with icons highlighting its key features: 140° motion sensor (max 40 ft), 330 lumens, water resistance, 2 lux light sensitivity, and adjustable run time (3s-7mins).

Настройка і ўстаноўка

1. Устаноўка батарэі

  1. Locate the battery compartment on the back or bottom of the floodlight unit.
  2. Адкрыйце крышку адсека.
  3. Insert the required batteries (typically 4x D-cell, refer to product packaging for exact type) ensuring correct polarity (+/-).
  4. Securely close the battery compartment cover to maintain water resistance.

2. Мантаж пражэктара

The floodlight is designed for flush mount installation on a wall or other flat surface.

  1. Choose a suitable mounting location that provides the desired coverage and is within the motion sensor's range. Ensure the surface is stable.
  2. Use the mounting bracket (if separate) or the base of the unit as a template to mark the drill holes on the wall.
  3. Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
  4. Align the floodlight with the holes and secure it using the provided screws. Do not overtighten.
Збоку view of Link2Home EM-BL268B Floodlight showing mounting bracket

Выява: Збоку view of the Link2Home EM-BL268B floodlight, illustrating the mounting base and the adjustable light heads.

3. Adjusting Light Heads and Sensor

Once mounted, adjust the light heads and sensor for optimal performance.

  • Light Heads: Manually pivot each light head up, down, and sideways to direct the light beam to your desired area.
  • Датчык руху: The motion sensor is typically located at the bottom of the unit. It can often be tilted or rotated to adjust its detection angle.
  • Settings Dials: Look for small dials on the sensor unit. These typically control:
    • ЧАС: Adjusts how long the light stays on after motion is detected (e.g., 3 seconds to 7 minutes).
    • LUX/DAYLIGHT: Adjusts the ambient light level at which the sensor becomes active. Set to a lower LUX for activation only in darker conditions, or higher for activation in brighter conditions.
    • SENSITIVITY/RANGE: Adjusts the detection range of the motion sensor (up to 40 feet).
Link2Home EM-BL268B Floodlight showing adjustable light heads and sensor controls

Image: The Link2Home EM-BL268B floodlight from an angle, highlighting the adjustable light heads and the motion sensor with its control dials.

Інструкцыя па эксплуатацыі

The Link2Home EM-BL268B floodlight operates automatically based on its sensor settings.

  • Аўтаматычная актывацыя: Once batteries are installed and settings are configured, the floodlight will automatically turn on when motion is detected within its range, provided the ambient light level is below the set LUX threshold.
  • Працягласць: The light will remain on for the duration set by the TIME dial. If motion is continuously detected, the light will reset its timer and stay on until no motion is detected for the set period.
  • Функцыя фотаэлемента: The integrated photocell prevents the light from activating during daylight hours, conserving battery power. The light will only become active when the surrounding light level drops sufficiently (as determined by the LUX setting).
Link2Home EM-BL268B Floodlight mounted on a wall during daytime, not illuminated

Image: The Link2Home EM-BL268B floodlight mounted on a brick wall during the day, demonstrating its inactive state due to sufficient ambient light.

Link2Home EM-BL268B Floodlight mounted on a wall at night, illuminated

Image: The Link2Home EM-BL268B floodlight mounted on a brick wall at night, showing its bright illumination when activated by motion in low-light conditions.

Тэхнічнае абслугоўванне

  • Замена батарэі: When the light output becomes dim or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in the Setup section. Always replace all batteries at once with new ones of the same type.
  • Уборка: Periodically wipe the light fixture and sensor lens with a soft, damp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents. Ensure the sensor lens is clear for optimal detection.
  • агляд: Regularly check the mounting screws and the fixture for any signs of wear or damage.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца.
  • Няма батарэек або разраджаных батарэек.
  • Няправільная палярнасць батарэі.
  • Ambient light too high (LUX setting).
  • Рух не выяўлены.
  • Install fresh batteries, check polarity.
  • Adjust LUX setting to a darker level.
  • Walk within sensor range to test.
Святло гарыць пастаянна.
  • Бесперапынны рух у зоне выяўлення.
  • Няспраўнасць датчыка.
  • Check for objects or activity constantly triggering the sensor.
  • Adjust sensor range or reposition the unit.
Днём уключаецца святло.
  • LUX setting is too high.
  • Adjust the LUX dial to a lower setting (towards the moon icon).
Далёкасць выяўлення дрэнная.
  • SENSITIVITY/RANGE setting is too low.
  • Obstructions blocking the sensor.
  • Лінза датчыка брудная.
  • Increase SENSITIVITY/RANGE setting.
  • Прыбярыце любыя перашкоды.
  • Ачысціце лінзу датчыка.

Тэхнічныя характарыстыкі

  • мадэль: EM-BL268B
  • Марка: Link2Home
  • Крыніца святла: святлодыёд
  • Выхад у люменах: 330 люмен
  • Крыніца харчавання: Battery Powered (e.g., 4x D-cell, 6 Volts total)
  • Ватtage: 1.5 ват
  • Кут выяўлення датчыка руху: 140°
  • Дыяпазон выяўлення датчыка руху: Да 40 футаў (12 метра)
  • Adjustable Run Time: Ад 3 секунд да 7 хвілін
  • Photocell Activation: Approx. 2 Lux
  • Выкарыстанне ў памяшканні/на вуліцы: На адкрытым паветры
  • Тып ўстаноўкі: для ўстаноўкі западліцо
  • колер: Чорны
  • Памеры прадукту (ДxШxВ): 16.51 х 14.48 х 16.51 см (6.5 х 5.7 х 6.5 цалі)
  • Вага прадмета: 535 г (1.18 фунта)

Гарантыя і падтрымка

This Link2Home product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Link2Home webсайт для атрымання падрабязных гарантыйных умоў.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Link2Home customer service. Contact information can typically be found on the product packaging or the official brand webсайт.

Webсайт: www.link2home.com (Напрample, verify actual webсайт)