M-Wave Bicycle Computer Cicli Bonin_CVC911 User Manual

1. Уводзіны

This manual provides comprehensive instructions for the M-Wave Bicycle Computer, model Cicli Bonin_CVC911. It covers installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the product.

Image 1: M-Wave Bicycle Computer head unit, yellow model.

2. Інфармацыя па бяспецы

Always prioritize safety when cycling. Ensure the computer is securely mounted and does not obstruct your view or control of the bicycle. Do not attempt to operate the computer while riding in traffic or hazardous conditions. Keep batteries out of reach of children. Dispose of batteries responsibly according to local regulations.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

• M-Wave Bicycle Computer Head Unit
• Бесправадны датчык хуткасці
• Магніт на кола
• Mounting Bracket for Handlebar/Stem
• Zip Ties for Sensor and Bracket
• Batteries (pre-installed or separate)
• Кіраўніцтва па эксплуатацыі

4. Настройка

4.1 Устаноўка батарэі

The M-Wave Bicycle Computer uses alkaline batteries. If not pre-installed, open the battery compartment on the back of the head unit and the speed sensor. Insert the batteries with correct polarity, observing the '+' and '-' markings, and securely close the compartments.

4.2 Sensor and Magnet Mounting

Attach the wireless speed sensor to the front fork using the provided zip ties. Position the wheel magnet on a spoke so that it passes within 2mm of the sensor when the wheel rotates. Ensure the magnet and sensor are aligned for reliable signal transmission.

4.3 Computer Mounting

Mount the computer head unit to your handlebar or stem using the provided bracket and zip ties. Ensure it is firmly secured and visible without obstructing your view або элементы кіравання.

Малюнак 2: Збоку view of the M-Wave Bicycle Computer, illustrating its compact design and potential mounting points.

4.4 Пачатковыя налады

Upon first use or after battery replacement, you will need to set up the computer. This typically involves:

1. Дыяметр колаў: Refer to your bicycle tire's sidewall for the circumference or use a measurement chart. Input this value into the computer for accurate speed and distance readings.
2. Адзінкі: Select your preferred units for speed (km/h or mph) and temperature (C° or F°).
3. Час: Усталюйце бягучы час.

Consult the on-screen prompts and use the 'SET' and 'MODE' buttons for navigation and selection.

5. Інструкцыя па эксплуатацыі

The M-Wave Bicycle Computer features 14 functions. Use the 'MODE' button to cycle through different display modes and the 'SET' button for adjustments within a mode.

Image 3: Product packaging showing the 14 functions of the M-Wave Bicycle Computer.

• Бягучая хуткасць: Паказвае хуткасць вашай язды на ровары ў рэжыме рэальнага часу.
• Сярэдняя хуткасць: Shows the average speed for your current ride.
• Максімальная хуткасць: Records the highest speed achieved during your ride.
• Адлегласць (пераход на летні час): Displays the distance covered during your current ride.
• Агульная адлегласць (ODO): Shows the accumulated total distance.
• Час паездкі: Адсочвае працягласць вашай бягучай паездкі.
• гадзіннік: Адлюстроўвае бягучы час.
• тэмпература: Shows the ambient temperature in Celsius or Fahrenheit.
• Лічыльнік калорый: Estimates calories burned during your ride.
• CO2 Savings: Calculates estimated CO2 savings compared to driving.
• Аўтаматычны старт/стоп: The computer automatically starts recording when you begin cycling and pauses when you stop.
• Speed Tendency/Comparison: Indicates if your current speed is higher or lower than your average speed.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

Wipe the computer and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents. The unit is waterproof, but avoid submerging it for extended periods.

6.2 Замена батарэі

When the display becomes dim or functions become erratic, it's time to replace the batteries. Follow the battery installation steps outlined in Section 4.1, ensuring correct polarity. Resetting initial settings may be required after battery replacement.

7. Выпраўленне непаладак

If your M-Wave Bicycle Computer is not functioning as expected, consider the following:

• No Speed Display:
  • Check the distance between the sensor and magnet. It should be no more than 2mm.
  • Ensure the sensor and magnet are correctly aligned.
  • Verify that the sensor battery is not depleted.
  • Confirm the computer head unit battery is not depleted.
• Няправільныя паказанні:
  • Re-check the wheel diameter setting.
  • Пераканайцеся, што датчык і магніт надзейна замацаваны і не зрушваюцца.
• Дысплей пусты:
  • Replace the computer head unit battery.
  • Пераканайцеся, што батарэйка ўстаўлена з правільнай палярнасцю.
• Кнопкі не рэагуюць:
  • Паспрабуйце выняць і зноў уставіць батарэю, каб выканаць мяккі скід.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the M-Wave official webсайт або звярніцеся да прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі.