1. Уводзіны
This manual provides essential information for the safe and effective use of your KFD 29V 2A AC/DC Power Adapter. This power supply is designed to provide reliable power to compatible electric recliners and lift chairs. Please read these instructions carefully before installation and operation.
Image 1.1: The KFD 29V 2A AC/DC Power Adapter and its associated power cord.
2. Інфармацыя па бяспецы
Каб забяспечыць бяспечную працу, выконвайце наступныя меры засцярогі:
- Do not expose the adapter to water or excessive moisture.
- Не разбірайце і не мадыфікуйце адаптар.
- Пераканайцеся, што разетка мае ўзровень гучнасціtage matches the adapter's input requirements (100-240V AC).
- Avoid placing the adapter in poorly ventilated areas or near heat sources.
- Адключайце электрычнасць падчас навальніцы або калі прылада не выкарыстоўваецца працяглы час.
Image 2.1: The adapter features built-in safety protections including surge protection, current stabilization, temperature control, and short circuit prevention.
3. Compatibility and Identification
This power adapter is compatible with various recliner and lift chair models from brands such as Pride Mobility, Limoss, Okin, IKOCO, Kaidi, Flexsteel, Ashley, ZBPOWER, Lazy Boy, Golden, Berkline, and Southern Motion. Before connecting, verify that your device requires a 29V 2A (58W) power supply and has a compatible 2-pin connector (one flat, one round).
To confirm compatibility, check the label on your original power adapter or the power input specifications of your recliner/lift chair.
Image 3.1: The adapter's label clearly indicates the input (100-240V AC) and output (29V 2A, 58W) specifications.
Image 3.2: The standard 2-pin connector (one flat, one round) used to connect to the recliner motor.
4. Настройка і ўстаноўка
- Распакуйце адаптар: Carefully remove the KFD power adapter and power cable from its packaging.
- Падключыце кабель харчавання: Insert the AC power cable into the adapter's input port. Ensure it is firmly seated.
- Connect to Recliner/Lift Chair: Locate the power input port on your recliner or lift chair. This is typically a 2-pin connector. Align the adapter's output connector with the chair's input port and push firmly until it clicks into place.
- Падключыце да разеткі: Insert the AC power cable's plug into a standard 100-240V wall outlet.
- Праверце магутнасць: Once connected, your recliner or lift chair should be ready for operation. Test its functions to ensure proper power delivery.
Image 4.1: The power adapter properly connected and supplying power to a recliner chair.
5. Інструкцыя па эксплуатацыі
Once the KFD power adapter is correctly installed and connected to a power source, your recliner or lift chair will function according to its original design. Operate your chair using its integrated controls (buttons or remote) as you normally would. The adapter provides continuous power for all chair movements.
6. Тэхнічнае абслугоўванне
- Уборка: Disconnect the adapter from the power outlet before cleaning. Use a dry, soft cloth to wipe the adapter's surface. Do not use liquid cleaners or sprays.
- захоўванне: When not in use for extended periods, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Coil the cables loosely to prevent damage.
- агляд: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use and replace the adapter.
7. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Recliner/Lift Chair does not power on. | No power from outlet, loose connection, or faulty adapter. | Check if the wall outlet is functional. Ensure all connections (adapter to wall, adapter to chair) are secure. If issues persist, the adapter may need replacement. |
| Adapter feels warm during operation. | Normal operation, or poor ventilation. | A slight warmth is normal. Ensure the adapter is in a well-ventilated area and not covered. If it becomes excessively hot, disconnect immediately and contact support. |
| Intermittent power to chair. | Loose cable connection or damaged cable. | Verify all cable connections are tight. Inspect cables for visible damage. Replace if damaged. |
8. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Уваходны кнtage | 100-240 В пераменнага току, 50/60 Гц |
| Выхад Voltage | 29 В пастаяннага току |
| Выхадны ток | 2A |
| Ватtage | 58 Вт |
| Нумар мадэлі | ZB-A290020-A |
| Сертыфікаты | CE, FCC, RoHS, UL Listed |
| Функцыі бяспекі | OVP (над тымtagабарона ад электрычнай напругі), OCP (абарона ад перагрузкі па току), SCP (абарона ад кароткага замыкання) |
| Памеры (адаптар) | Прыблізна 5.51 х 4.61 х 1.85 цалі (памеры ўпакоўкі) |
| Вага прадмета | 11.5 унцыі |
9. Гарантыя і падтрымка
KFD products are covered by a warranty period to ensure customer satisfaction:
- Free Exchange: 30 дзён з дня пакупкі.
- Гарантыйны тэрмін: 36 месяцаў з даты пакупкі.
For technical support, warranty claims, or any questions regarding your KFD power adapter, please refer to the contact information provided with your product packaging or visit the official KFD website. When contacting support, please have your product model number (ZB-A290020-A) and purchase details available.