EMART Photography LED Continuous Light Lamp (Model EM-7W-LTL) Instruction Manual

Уводзіны

Thank you for choosing the EMART Photography LED Continuous Light Lamp. This manual provides detailed instructions for the safe and efficient use of your new lighting kit. Designed for tabletop studio photography, these lamps offer 5500K color temperature, 600 lumens, and a 90+ CRI for excellent color accuracy and clarity in digital photography.

EMART Photography LED Continuous Light Lamp with 5500K color temperature, 600 lumens, and 90+ CRI.

Што ўключана

Your EMART Photography LED Continuous Light Lamp kit includes the following components:

• 2 x High Output Table Top Photography LED Light with Stand
• 2 x White Color Gel Filter for LED Light
• 2 x Orange Color Gel Filter for LED Light
• 2 x Blue Color Gel Filter for LED Light

Інструкцыя па наладзе

Follow these steps to set up your EMART LED Continuous Light Lamp:

1. Разгарніце ножкі штатыва: The light features a retractable bracket with a spring design. Gently pull out and unfold the tripod legs from the base of the light. Extend the lower portions of the tripod legs for increased stability.


The retractable tripod legs fold into the base for compact storage and extend for stability.

2. Адрэгулюйце Lamp Кіраўнік: У лamp head swivels up and down 180 degrees. Use the knob on the side to adjust the light beam to your desired angle.


Адрэгулюйце lamp head by swiveling it up or down 180 degrees using the side knob.

3. Падключэнне сілкавання: Plug the power cord into a standard electrical outlet. The light is now ready for use.


Падрабязны view of the light's components, including the power switch and plug.

Відэа кіраўніцтва па наладзе

Official EMART installation video demonstrating how to set up the LED continuous light lamp, including unfolding the tripod legs and attaching color filters.

Інструкцыя па эксплуатацыі

To operate your EMART LED Continuous Light Lamp:

1. Уключыць/выключыць: Use the power switch located on the back of the lamp каб уключыць або выключыць святло.
2. Наладзіць кут святла: As described in the setup, use the side knob to fine-tune the lamp head's angle to direct light precisely where needed.
3. Use Color Gel Filters: To change the color temperature for cooler or warmer photos, unscrew the front cap of the lamp. Insert the desired white, orange, or blue color gel filter, then screw the front cap back on securely.


The kit includes orange, blue, and white gel filters to adjust the light's color temperature.

These lights are ideal for eliminating superfluous shadows and achieving excellent, even color temperature and clarity for various photography needs, including toys, baking, jewelry, and still photos.

EMART LED lights provide ideal illumination for tabletop photography setups.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your EMART LED Continuous Light Lamp:

• Уборка: Use a soft, dry cloth to clean the exterior of the lamp. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• захоўванне: When not in use, fold the tripod legs into the base and store the lamps in a cool, dry place away from direct sunlight and moisture.
• Апрацоўка: Апрацоўваць лamps with care to avoid damage to the LED bulbs or internal components.

Ліквідацыю непаладак

If you encounter issues with your EMART LED Continuous Light Lamp, refer to the following:

• Святло не загараецца:
  • Пераканайцеся, што шнур харчавання надзейна падключаны да спраўнай электрычнай разеткі.
  • Verify that the power switch on the back of the lamp знаходзіцца ў становішчы «УКЛ.».
• Няўстойлівая падстаўка:
  • Ensure the tripod legs are fully extended and spread out on a flat, stable surface.
  • Check that the retractable bracket is securely locked in place.
• Непаслядоўная светлавая аддача:
  • Ensure the color gel filters are correctly installed and not obstructing the light path.
  • Check for any visible damage to the LED bulbs.

If problems persist, please contact EMART customer support for assistance.

Тэхнічныя характарыстыкі

Гарантыя

The EMART Photography LED Continuous Light Lamp пастаўляецца з a Гарантыя 12 месяцаў from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Падтрымка

For any questions, technical support, or warranty inquiries regarding your EMART Photography LED Continuous Light Lamp, please contact EMART customer service. Refer to the product packaging or the official EMART webсайт для атрымання самай актуальнай кантактнай інфармацыі.