be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case User Manual

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your product.

The Dark Base PRO 900 Rev. 2 is designed for high-end systems and offers exceptional flexibility, silent operation, and advanced cooling capabilities. Its modular design allows for various configurations to suit your specific needs.

Інфармацыя па бяспецы

• Заўсёды адключайце блок харчавання ад разеткі перад усталёўкай або зняццем якіх-небудзь кампанентаў.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Трымайце дробныя дэталі і ўпаковачныя матэрыялы далей ад дзяцей.
• Do not attempt to open or repair the case or its components yourself. Refer to qualified service personnel.
• Забяспечце належную вентыляцыю вакол корпуса ПК, каб прадухіліць перагрэў.

Змест пакета

Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй кампаненты:

• be quiet! Dark Base PRO 900 Rev. 2 PC Case
• Accessory box with screws, cable ties, and other mounting hardware
• Кіраўніцтва карыстальніка
• RGB LED strips (pre-installed or included separately)
• Additional fan mounting brackets (if applicable)

Настройка

1. Падрыхтоўка справы

Place the case on a stable, flat surface. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward. The tempered glass side panel should be handled with extreme care.

Выява: Інтэр'ер view of the Dark Base PRO 900 Rev. 2, illustrating the internal layout for component installation.

2. Устаноўка мацярынскай платы

The motherboard tray is removable and can be inverted for an inverse layout. To remove, unscrew the mounting screws and slide the tray out. Install your ATX, E-ATX, or XL-ATX motherboard onto the tray using the provided standoffs and screws. Ensure the I/O shield is installed in the case before re-inserting the motherboard tray.

3. Усталёўка блока сілкавання (БС)

Install the PSU from the rear of the case. Secure it with the provided screws. Ensure all necessary cables are routed through the designated cutouts for efficient cable management.

4. Усталёўка дыска (HDD/SSD)

The case features modular HDD slots. Each HDD cage can be repositioned or removed. Install 3.5-inch HDDs into the drive cages using the anti-vibration grommets and screws. 2.5-inch SSDs can be mounted directly onto the HDD trays or dedicated SSD mounts behind the motherboard tray.

5. Відэакарта і карты пашырэння

Remove the necessary PCIe slot covers. Insert your graphics card and other expansion cards into the motherboard's PCIe slots and secure them with screws.

6. Усталёўка вентылятара і радыятара

The case comes with three pre-installed Silent Wings 3 PWM fans. Additional fans or radiators up to 420mm can be installed in various positions (front, top, rear, bottom). Refer to the fan controller section for connecting fans.

Image: Front of the Dark Base PRO 900 Rev. 2 with the door open, showing fan mounts and dust filter access.

7. Кіраванне кабелем

Utilize the numerous cable routing cutouts and Velcro straps behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Інструкцыя па эксплуатацыі

1. Уключэнне

After all components are installed and connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button located on the top I/O panel to start your system.

Image: Top I/O panel of the Dark Base PRO 900 Rev. 2, highlighting the power button and connectivity options.

2. Кіраванне вентылятарам

The case features a stepless dual-rail fan controller, switchable between Silence and Performance modes. Use the fan controller switch on the top I/O panel to adjust fan speeds according to your preference for noise or cooling performance.

3. RGB LED Illumination

The integrated RGB LED illumination can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard software. Cycle through various colors and lighting effects to customize your system's appearance.

Тэхнічнае абслугоўванне

1. Ачыстка пылавога фільтра

The Dark Base PRO 900 Rev. 2 includes easily removable dust filters at the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case. Simply slide them out, clean with water or a soft brush, and re-insert once dry.

2. Генеральная ўборка

Выкарыстоўвайце мяккі, damp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

Ліквідацыю непаладак

• Сістэма не ўключаецца:
  • Ensure the PSU is properly connected to the wall outlet and switched on.
  • Праверце ўсе раздымы сілкавання матчынай платы і яе кампанентаў.
  • Verify that the front panel power button cable is correctly connected to the motherboard.
• Вентылятары не круцяцца:
  • Check fan connections to the fan controller or motherboard headers.
  • Ensure the fan controller is set to an appropriate speed mode (not off, if applicable).
• RGB LEDs Not Working:
  • Verify RGB strip connections to the case's RGB controller or motherboard.
  • Калі выкарыстоўваецца праграмнае забеспячэнне для матчынай платы, пераканайцеся, што яно ўсталявана і настроена правільна.
• Празмерны шум:
  • Check if fan speeds are set too high; adjust using the fan controller.
  • Ensure all screws are tightened to prevent vibrations.
  • Clean dust filters and fans to remove obstructions.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Інфармацыя аб гарантыі

Гэты прадукт распаўсюджваецца на a 3-гадовая гарантыя вытворцы from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

Калі ласка, захавайце доказы пакупкі для прэтэнзій па гарантыі.

Падтрымка кліентаў

For technical assistance, troubleshooting, or warranty inquiries, please visit the official be quiet! webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў.

Афіцыйны Webсайт: www.bequiet.com