Aqualine POOLTOOL 132
Інструкцыя па эксплуатацыі клінападобнага асвятляльніка для басейна Aqualine, частка 132
Марка: Aqualine
мадэль: POOLTOOL 132
Уводзіны
This manual provides instructions for the Aqualine Pool Light Wedge Part 132, designed to secure pool lights when the light niche tab is stripped or broken. This product is made in the USA and is corrosion resistant, offering a reliable solution for maintaining your pool lighting.
Важная інфармацыя па бяспецы
- Always ensure power to the pool light circuit is ВЫКЛ перад устаноўкай або абслугоўваннем.
- All electrical work should be performed by a licensed electrician and the light circuit must be GFCI protected.
- Do not attempt to install or remove the wedge while the pool light is submerged or powered.
- Выкарыстоўвайце адпаведныя сродкі індывідуальнай абароны падчас усталёўкі.
Змест пакета
The Aqualine Pool Light Wedge Part 132 package includes:
- 1x Aqualine Pool Light Wedge Part 132 (black plastic wedge with screw)
Настройка і ўстаноўка
Падрыхтоўка да ўстаноўкі
The Aqualine Pool Light Wedge Part 132 is designed for easy installation to securely hold your pool light in place, especially when the original mounting tab is damaged.
Пакрокавая ўстаноўка
- Выключыць харчаванне: Ensure the power to your pool light is completely disconnected at the circuit breaker.
- Remove Existing Light (if applicable): Carefully remove the existing pool light fixture from its niche.
- Position the Wedge: Insert the screw through the screw hole of your pool light fixture. Place the black plastic wedge onto the screw, ensuring the curved side faces the light. Do not tighten fully yet.
- Insert Light into Niche: Carefully guide the pool light fixture back into its niche. The wedge should be positioned to fit between the metal bars or the existing partially broken screw hole, acting as an anchor.
- Забяспечце святло: Apply gentle pressure to keep the plastic wedge in place against the light fixture. Slowly tighten the screw until the light is securely fastened within the niche. Ensure a snug fit to prevent movement.
- Праверце стабільнасць: Once tightened, gently test the light fixture to ensure it is firmly in place and does not wobble.
- Аднавіць сілу: Once installation is complete and verified, restore power to the pool light circuit.
Figure 1: Aqualine Pool Light Wedge Part 132 components, showing the black plastic wedge and a long metal screw.
Figure 2: Aqualine Pool Light Wedge and screw shown separately.
Figure 3: Aqualine Pool Light Wedge held between fingers, showing its side profile.
Figure 4: Aqualine Pool Light Wedge held between fingers, showing its top view.
Figure 5: Aqualine Pool Light Wedge assembled with the screw, ready for installation.
Figure 6: Diagram illustrating the typical installation steps for the Pool Light Wedge. It also includes a warning about licensed electricians and GFCI protection.
Афіцыйнае відэа па ўсталёўцы
Video 1: This video demonstrates the installation process for the Swimming Pool Light Wedge Part #132, showing how to secure it within a pool light niche.
Інструкцыя па эксплуатацыі
The Aqualine Pool Light Wedge Part 132 is a passive component designed to provide a secure mounting point for pool lights. Once installed, its function is to hold the light firmly in place. There are no operational controls for the wedge itself. The operation of your pool light (on/off, color changes, etc.) will depend on your specific pool light model and its control system.
Тэхнічнае абслугоўванне
Догляд і абслугоўванне
- Рэгулярны агляд: Periodically inspect the wedge and the pool light fixture for any signs of wear, damage, or loosening.
- Уборка: If necessary, gently clean the wedge with a soft brush and mild pool-safe cleaner. Avoid abrasive materials that could damage the plastic.
- Праверка герметычнасці: Ensure the screw remains tight to maintain a secure fit for the pool light. Re-tighten if any looseness is detected.
- Устойлівасць да карозіі: The wedge is made from corrosion-resistant material, but regular pool chemical balancing is recommended to prolong the life of all pool components.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Pool light is loose after installation. | Screw not tightened sufficiently; wedge not properly seated. | Turn off power, re-seat the wedge, and tighten the screw firmly. |
| Difficulty inserting the light with the wedge. | Improper positioning of the wedge or light. | Ensure the curved side of the wedge is against the light and it aligns with the niche's retaining features. |
| Water leaking around the light fixture. | Not directly related to the wedge, but indicates a seal issue with the light fixture itself. | Consult your pool light's manual or a professional for sealing the light fixture. |
Тэхнічныя характарыстыкі
- Марка: Aqualine
- мадэль: POOLTOOL 132
- матэрыял: Пластыкавыя
- колер: Белы
- Памеры прадукту: 3 см Д х 1 см Ш х 1 см В
- Вага прадмета: 1.3 унцый
- асаблівасць: Light Wedge, Corrosion Resistant
- Рэкамендуемае выкарыстанне: Repairing and holding pool lights in swimming pools
- UPC: 601579499426
Гарантыя і падтрымка
The Aqualine Pool Light Wedge Part 132 comes with a 30-Day Money Back Guarantee. For further support or warranty claims, please contact Aqualine customer service directly.