Geko 6T Bottle Jack (Model G01053) User Manual

1. Прадукт скончыўсяview

The Geko 6T Bottle Jack (Model G01053) is a robust hydraulic lifting device designed for heavy goods and industrial vehicles. It features a lifting capacity of up to 6 tons and is constructed from high-quality alloy steel for durability and reliability.

Figure 1: Geko 6T Bottle Jack with its two-piece handle.

Малюнак 2: бок view of the Geko 6T Bottle Jack, highlighting its compact design.

2. Важная інфармацыя па бяспецы

Read and understand all safety warnings and operating instructions before using this bottle jack. Failure to follow these instructions may result in property damage, personal injury, or death.

Агульныя меры бяспекі

• Always operate the jack on a hard, level surface.
• Ensure the load is centered on the jack saddle.
• Never exceed the rated lifting capacity of 6 tons.
• Do not use the jack as a permanent support device. Always use appropriate jack stands to support the load after lifting.
• Keep hands and feet clear of the jack and the load during operation.
• Карыстайцеся адпаведнымі сродкамі індывідуальнай абароны (СІЗ), такімі як ахоўныя акуляры і пальчаткі.
• Inspect the jack for damage or wear before each use. Do not use if damaged.
• Не дапускайце дзяцей і старонніх асоб да рабочай зоны.
• Не змяняйце дамкрат ні ў якім разе.

Lifting and Lowering Safety

• Ensure the vehicle's parking brake is engaged and wheels are chocked before lifting.
• Падымайце толькі ў месцах, вызначаных вытворцам аўтамабіля.
• Апускайце груз павольна і асцярожна.

3. Настройка

Before using the Geko 6T Bottle Jack, ensure it is properly prepared for operation.

Распакаванне і праверка

1. Carefully remove the jack and its components from the packaging.
2. Inspect the jack for any signs of shipping damage. If damage is found, do not use the jack and contact your supplier.
3. Verify that all components, including the two-piece handle, are present.

Зборка ручкі

1. Insert the smaller handle section into the larger handle section.
2. Ensure the handle is securely connected before use.

4. Інструкцыя па эксплуатацыі

Follow these steps for safe and effective operation of your Geko 6T Bottle Jack.

Lifting a Load

1. Падрыхтоўка: Position the jack on a hard, level surface directly under the lifting point of the load as specified by the manufacturer. Ensure the load is stable and cannot roll or shift.
2. Зачыніце выпускны клапан: Turn the release valve (typically a screw or knob at the base) clockwise until it is firmly closed. Do not overtighten.
3. Пазіцыя Джэка: Ensure the jack saddle is centered under the lifting point.
4. Ручка помпы: Insert the handle into the pump sleeve. Pump the handle up and down steadily to raise the jack's ram and lift the load.
5. Monitor Lift: Continue pumping until the load reaches the desired height. Do not lift beyond the maximum extension marked on the ram.
6. Бяспечная загрузка: Immediately place appropriate jack stands under the load for support. The jack is for lifting only, not for sustained support.

Апусканне грузу

1. Злёгку падняць: If the load is on jack stands, slightly raise the load with the bottle jack to remove pressure from the stands.
2. Зняць падстаўкі для Джэка: Carefully remove the jack stands from under the load.
3. Адкрыць выпускны клапан: Slowly turn the release valve counter-clockwise to gradually lower the load. Control the descent speed by adjusting how much the valve is opened.
4. Full Lowering: Continue lowering until the load is fully supported on the ground or its wheels.
5. Retract Ram: Once the load is fully lowered, fully open the release valve and gently push the ram down if it does not retract completely on its own.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your Geko 6T Bottle Jack.

Змазка

• Periodically lubricate moving parts, such as the pump mechanism and ram, with light machine oil.
• Check the hydraulic oil level every three months. To do this, fully lower the ram, remove the oil filler plug, and ensure the oil level is just below the filler hole. Top up with hydraulic jack oil if necessary.

Ачыстка і захоўванне

• Keep the jack clean and free from dirt, grease, and moisture.
• Store the jack in a dry, protected area with the ram fully retracted.

Агляд

• Before each use, inspect the jack for any signs of damage, leaks, or wear. Pay close attention to welds, the ram, and the base.
• If any damage is found, do not use the jack and have it repaired by qualified personnel.

6. Выпраўленне непаладак

This section addresses common issues you might encounter with your Geko 6T Bottle Jack.

If you encounter problems not listed here or if solutions do not resolve the issue, contact Geko customer support or a qualified service technician.

7. Тэхнічныя характарыстыкі

• мадэль: G01053
• Марка: Geko
• Грузападымальнасць: 6 тоны
• матэрыял: Легаваная сталь
• колер: Чорны
• Вага прадмета: 4.08 кілаграма
• Памеры ўпакоўкі: 41 х 35 х 35 см
• вытворца: Firma Handlowa GEKO
• International Article Number (EAN): 05901477113673

8. Гарантыя і падтрымка

Geko products are manufactured to high standards and are subject to rigorous quality control.

Інфармацыя аб гарантыі

Specific warranty terms and conditions may vary by region and retailer. Please refer to your purchase documentation or contact your retailer for detailed warranty information. Keep your proof of purchase for any warranty claims.

Падтрымка кліентаў

For technical assistance, spare parts, or service inquiries, please contact your local Geko distributor or the retailer from whom you purchased the product.

Manufacturer: Firma Handlowa GEKO