BFT ALENA SW2 D113811 00004 Control Board Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the installation, configuration, and operation of the BFT ALENA SW2 D113811 00004 control board. This control unit is designed for managing one or two 230V gate operators. Please read this manual carefully before proceeding with installation or operation to ensure proper functionality and safety.

2. Інфармацыя па бяспецы

Важныя інструкцыі па бяспецы:

• Усталёўку і абслугоўванне павінны выконваць толькі кваліфікаваныя спецыялісты.
• Disconnect power before performing any work on the control board or connected operators.
• Ensure all electrical connections comply with local regulations and standards.
• Keep children and unauthorized persons away from the gate area during operation.
• Regularly check the system for proper operation and safety device functionality.

3. Прадукт скончыўсяview

The BFT ALENA SW2 D113811 00004 is a sophisticated control board featuring dip switches and potentiometers for precise configuration. It includes extractable terminal blocks for easier wiring, an integrated radio receiver for remote control, and supports pedestrian opening functionality. The board incorporates safety verification and self-diagnosis features to ensure reliable operation.

Figure 1: Placeholder image for the BFT ALENA SW2 D113811 00004 Control Board. This image indicates that a specific product image is not available.

Асноўныя характарыстыкі:

• Control for one or two 230V operators.
• Extractable terminal blocks with color-coded standard for simplified wiring.
• Dip switch and potentiometer programming for precise adjustments.
• Integrated radio receiver for remote control operation.
• Pedestrian opening function.
• Safety verification and self-diagnosis capabilities.

4. Настройка і ўстаноўка

4.1 Mounting the Control Board:

• Choose a suitable, protected location for mounting the control board, away from direct weather exposure.
• Secure the control board enclosure firmly using appropriate fasteners.

4.2 Электрычныя злучэнні:

• Перад тым, як рабіць якія-небудзь падключэнні, пераканайцеся, што асноўная крыніца харчавання адключана.
• Connect the 230V AC power supply to the designated terminal blocks. Refer to the wiring diagram provided with the product for specific terminal assignments.
• Connect the gate operator(s) motors to the respective output terminals.
• Wire all safety devices (e.g., photocells, safety edges) to their dedicated input terminals.
• Connect any command devices (e.g., push buttons, key switches) to the appropriate input terminals.
• Utilize the extractable, color-coded terminal blocks for organized and secure wiring.

4.3 Initial Configuration (Dip Switches and Potentiometers):

• Refer to the detailed wiring and configuration diagrams included with your product for specific settings.
• Use the dip switches to select the desired operating logic (e.g., 3-step, 4-step, automatic closing).
• Adjust potentiometers for parameters such as motor force, pause time, and sensitivity of safety devices.
• Perform a self-learning procedure for the gate travel limits if applicable to your operator model.

5. Інструкцыя па эксплуатацыі

The BFT ALENA SW2 D113811 00004 control board supports various operating modes and functions:

• Стандартная аперацыя: Activate the gate using a remote control or wired command device. The gate will open or close according to the configured logic.
• Адкрыццё для пешаходаў: If configured, a separate command can activate a partial opening of the gate for pedestrian access.
• Актывацыя прылады бяспекі: In case of obstruction detected by safety devices (e.g., photocells), the gate will stop or reverse its movement to prevent injury or damage.
• Integrated Radio Receiver: To program new remote controls, follow the specific instructions provided in the full product manual for pairing transmitters with the integrated receiver.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your gate system. Perform the following checks periodically:

• Візуальны агляд: Check all wiring for signs of wear, damage, or loose connections. Ensure the control board enclosure is sealed and free from moisture or debris.
• Выпрабаванне прылады бяспекі: Regularly test all safety devices (photocells, safety edges) to ensure they are functioning correctly.
• Operator Check: Inspect the gate operators for smooth movement, lubrication, and any unusual noises.
• Уборка: Keep the control board and its components clean and free from dust. Use a soft, dry cloth for cleaning.

Для любога складанага тэхнічнага абслугоўвання або рамонту звярніцеся да кваліфікаванага спецыяліста.

7. Выпраўленне непаладак

This section provides guidance for common issues. For more complex problems, consult a qualified technician.

The self-diagnosis feature of the ALENA SW2 board can provide error codes or indicators. Refer to the full product manual for a list of these codes and their meanings.

8. Тэхнічныя характарыстыкі

• вытворца: B.F.T. S.P.A.
• Нумар мадэлі: D113811 00004 (ALENA SW2)
• крыніца харчавання: 230V (for one or two operators)
• Тып кіравання: Dip switch and potentiometer based
• Асаблівасці: Extractable terminal blocks, integrated radio receiver, pedestrian opening, safety verification, self-diagnosis.
• Памеры ўпакоўкі: 0.01 х 0.01 х 0.01 см
• Вага прадмета: 10 грамаў
• ASIN: B07G3BQRTX

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact BFT customer service directly. Keep your proof of purchase for warranty claims.