1. Уводзіны
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your LINAK CBD3 Control Box. The CBD3 is designed for use with LINAK DESKLINE systems, providing reliable control for adjustable desks and workstations.
Please read this manual thoroughly before installing or operating the product. Keep this manual for future reference.
2. Інструкцыі па тэхніцы бяспекі
- Пераканайцеся, што блок харчавання адпавядае характарыстыкам, указаным на этыкетцы прадукту.
- Do not open the control box. There are no user-serviceable parts inside. Opening the unit will void the warranty.
- Keep the control box away from moisture, direct sunlight, and extreme temperatures.
- Адключыце харчаванне перад любой устаноўкай, тэхнічным абслугоўваннем або ліквідацыяй няспраўнасцей.
- Гэты прадукт прызначаны толькі для выкарыстання ў памяшканнях.
- Only use LINAK approved components and accessories with this control box.
3. Прадукт скончыўсяview
The LINAK CBD3 Control Box is a compact and efficient power and control unit for DESKLINE systems. It features two channels for connecting lifting columns and provides a stable power supply for smooth and synchronized movement.
Малюнак 1: Спераду view of the LINAK CBD3 Control Box. This image shows the compact black casing of the control box, designed to power and manage adjustable desk systems.
Figure 2: Close-up of the product label on the LINAK CBD3 Control Box. The label displays critical information such as item number (CBD3B004200-409), date of manufacture, input voltage (120 V~, 60 Hz), power input (400 W), output voltage (24 V---), operation cycle (10%, max. 2 min./18 min.), and software P/N. It also includes safety certifications and a barcode.
4. Настройка і ўстаноўка
- Мантаж: Securely mount the CBD3 Control Box to a stable surface, typically under the desk frame, using appropriate fasteners (not included). Ensure adequate ventilation around the unit.
- Connecting Lifting Columns: Connect the lifting columns (actuators) to the designated channels on the control box. Refer to the specific DESKLINE system manual for correct port identification.
- Connecting Control Panel: Plug the control panel (handset) into the appropriate port on the control box.
- Падключэнне сілкавання: Connect the power cable to the control box and then plug it into a grounded electrical outlet.
- Ініцыялізацыя: After all connections are made and power is supplied, perform the initialisation procedure as described in your DESKLINE system manual. This typically involves driving the desk to its lowest position and holding the down button for a few seconds.
Заўвага: Always ensure all cables are securely connected and routed to prevent pinching or damage.
5. Інструкцыя па эксплуатацыі
The CBD3 Control Box operates in conjunction with a LINAK DESKLINE control panel. Refer to your specific control panel's manual for detailed operating instructions.
- Рэгуляванне вышыні: Use the UP and DOWN buttons on your control panel to adjust the desk height.
- Пазіцыі памяці: If your control panel supports memory functions, follow its instructions to save and recall preferred desk heights.
- Прыпынак бяспекі: The system is equipped with an anti-collision feature. If the desk encounters an obstruction during movement, it will stop and reverse slightly.
Важна: Do not overload the desk. Refer to your desk frame's specifications for maximum load capacity.
6. Тэхнічнае абслугоўванне
- Уборка: Clean the exterior of the control box with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Праверка кабеля: Periodically inspect all cables for signs of wear, damage, or loose connections. Replace damaged cables immediately.
- Няма ўнутранага абслугоўвання: The CBD3 Control Box is a sealed unit and requires no internal maintenance. Any attempt to open the unit will void the warranty and may cause damage.
7. Выпраўленне непаладак
If you experience issues with your LINAK DESKLINE system, consult the following common troubleshooting steps:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Стол не рухаецца. | No power, loose cables, system not initialized. | Check power connection. Ensure all cables are securely plugged in. Perform system initialization. |
| Desk moves unevenly or stops. | Overload, obstruction, synchronization issue. | Reduce load on the desk. Check for obstructions. Perform system initialization to re-synchronize columns. |
| Панэль кіравання не рэагуе. | Loose connection, faulty control panel. | Check control panel cable connection. Try disconnecting and reconnecting. If issue persists, contact support. |
If the problem persists after attempting these solutions, please contact LINAK support or your dealer.
8. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | Лінак |
| Нумар мадэлі | CBD3B004200-009 |
| Уваходны кнtage | 120 V~, 60 Hz (as per label, may vary by region/model) |
| Увод магутнасці | 400 W (as per label) |
| Выхад Voltage | 24 V--- (as per label) |
| Каналы | 2 |
| Цыкл аперацыі | 10%, max. 2 min./18 min. (as per label) |
| Памеры (пакет) | 25.15 х 9.65 х 7.87 см |
| Вага (упакоўкі) | 1.59 кг |
| Сумяшчальнасць | LINAK DESKLINE systems |
9. Інфармацыя аб гарантыі
LINAK products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official LINAK webсайт. Гарантыя звычайна распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні.
Заўвага: Opening the control box or using non-approved components will void the warranty.
10. Падтрымка і кантакты
For technical assistance, spare parts, or further information regarding your LINAK CBD3 Control Box or DESKLINE system, please contact your authorized LINAK dealer or visit the official LINAK webсайт.
When contacting support, please have your product model number (CBD3B004200-009) and serial number (if applicable) ready.
LINAK Official Webсайт: www.linak.com
Part Number from label: P.O.393605-0052 (This link is a hypothetical search on Linak's site for the part number found on the label image)