1. Інфармацыя па бяспецы
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Электрабяспека: Always turn off power at the circuit breaker before beginning installation or performing any maintenance. Consult a qualified electrician if you are unsure about wiring procedures.
- Ўстаноўка: Ensure the mounting surface can support the weight of the fixture. Do not install in wet locations unless explicitly rated for such environments.
- Апрацоўка: Do not touch the LED light source directly when the fixture is on, as it may be hot.
- Сумяшчальнасць: Use only with compatible LED dimmers (e.g., Leviton, Lutron) for dimming functionality.
2. Прадукт скончыўсяview
The CLOUDY BAY LED Flush Mount Ceiling Spot Light provides bright, efficient, and adjustable illumination for various indoor spaces. Its sleek design integrates seamlessly into modern interiors.

Малюнак 2.1: Спераду view of the CLOUDY BAY LED Flush Mount Ceiling Spot Light.
Асноўныя характарыстыкі:
- Bright and Efficient: 8W power, 600 lumens output, 3000K warm white light.
- Высокая дакладнасць колеру: CRI 90+ for vivid color representation.
- Рэгуляванае асвятленне: Tilt angle allows for directed light.
- Зацямненне: Compatible with most LED dimmers for adjustable brightness (10%-100%).
- Элегантны дызайн: Flush mount fixture for a clean aesthetic.
3. Змесціва ўпакоўкі
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- LED Flush Mount Ceiling Spot Light Fixture
- Мантажныя прыналежнасці (шрубы, раздымы для правадоў)
- Кіраўніцтва па эксплуатацыі
4. Тэхнічныя характарыстыкі
| Атрыбут | Каштоўнасць |
|---|---|
| Марка | ХМАРНАЯ ЗАТОКА |
| Нумар мадэлі | LCSLSR830WH |
| Колер | White | 3000K |
| Матэрыял | Алюміній, пластык |
| Памеры прадукту | 5 см Д х 5 см Ш х 4 см В |
| Крыніца харчавання | AC |
| тtage | 120 вольт |
| Ватtage | 8 ват |
| Святлоаддача | 600 люмен |
| Каляровая тэмпература | 3000 кельвінаў (цёплы белы) |
| CRI | 90+ |
| Асаблівасць | Зацямняецца |
| Тып ўстаноўкі | для ўстаноўкі западліцо |
| Выкарыстанне ў памяшканні/на вуліцы | У памяшканні |
5. Настройка і ўстаноўка
Follow these steps to install your CLOUDY BAY LED Flush Mount Ceiling Spot Light. Ensure power is OFF at the circuit breaker before starting.
- Падрыхтуйце размеркавальную скрынку: Ensure your electrical junction box is securely mounted and accessible.
- Устанавіце кранштэйн: Attach the mounting bracket to the junction box using the provided screws. Ensure it is firm and stable.
- Правадныя злучэнні: Connect the fixture's wires to your household wiring using the quick connectors. Match live (black), neutral (white), and ground wires according to local electrical codes.
- Прымацуеце прыстасаванне: Акуратна ўстаўце правады ў размеркавальную скрынку. Сумясціце прыстасаванне з мантажным кранштэйнам і замацуйце яго з дапамогай прадугледжаных шруб.
- Аднавіць сілу: Пасля таго, як прыбор будзе надзейна ўсталяваны, аднавіце электразабеспячэнне з дапамогай аўтаматычнага выключальніка.

Figure 5.1: Mounting bracket installation.

Figure 5.2: Wire connection detail.

Figure 5.3: Attaching the light fixture.
Відэакіраўніцтва па ўсталёўцы:
Video 5.1: Official installation guide for CLOUDY BAY Ceiling Spotlights. This video demonstrates the wiring and mounting process for the fixture.
6. Інструкцыя па эксплуатацыі
Рэгуляванне напрамку святла:
The spot light features an adjustable tilt angle, allowing you to direct the light beam as needed. Gently pivot the light head to achieve the desired angle. The fixture can be rotated 360 degrees and tilted up to 180 degrees.

Figure 6.1: Illustration of the adjustable tilt and rotation capabilities.
Функцыя зацямнення:
This LED spot light is dimmable from 10% to 100% when used with a compatible LED dimmer switch (sold separately). Adjust the dimmer switch to achieve your preferred brightness level.

Figure 6.2: Visual representation of the dimming range.
7. Тэхнічнае абслугоўванне
To ensure the longevity and optimal performance of your LED spot light, follow these simple maintenance guidelines:
- Уборка: Адключыце сілкаванне перад чысткай. Выкарыстоўвайце мяккую сухую тканіну для працірання прыбора. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі, бо яны могуць пашкодзіць пакрыццё або электрычныя кампаненты.
- агляд: Periodically check for any loose connections or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician.
- Замена лямпачкі: This fixture uses integrated LED technology and does not require bulb replacement.
8. Выпраўленне непаладак
If you encounter issues with your CLOUDY BAY LED Flush Mount Ceiling Spot Light, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Не гарыць святло | No power, loose wiring, faulty switch | Праверце аўтаматычны выключальнік. Пераканайцеся, што ўсе правадныя злучэнні надзейныя. Праверце выключальнік. |
| Мільгае святло | Incompatible dimmer, loose wiring, power fluctuations | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if power fluctuations are suspected. |
| Святло не цьмянее | Non-LED compatible dimmer, faulty dimmer switch | Replace with an LED-compatible dimmer switch. Test or replace the dimmer switch. |
9. Гарантыя і падтрымка
This CLOUDY BAY LED Flush Mount Ceiling Spot Light is covered by a Гарантыя 3 год з дня пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры звычайным выкарыстанні.
For warranty claims, technical support, or any questions regarding your product, please contact CLOUDY BAY customer service. Please have your model number (LCSLSR830WH) and proof of purchase available.
Кантактная інфармацыя:
- Refer to your product packaging or the official CLOUDY BAY webсайт для атрымання найбольш актуальнай кантактнай інфармацыі.