VOLTCRAFT IR 2201-50D USB Infrared Thermometer

Уводзіны

This manual provides essential information for the safe and effective operation of your VOLTCRAFT IR 2201-50D USB Infrared Thermometer. Please read these instructions thoroughly before using the device and retain them for future reference. This device is designed for non-contact temperature measurement across a wide range, featuring a dual laser for precise targeting and a USB interface for data transfer.

Інструкцыі па тэхніцы бяспекі

• Лазерная бяспека: Do not look directly into the laser beam or point it at people or animals. The laser is used for targeting only.
• Абарона вачэй: Always wear appropriate eye protection when operating the device in environments where laser exposure is a concern.
• Тэмпературныя абмежаванні: Не падвяргайце прыладу ўздзеянню экстрэмальных тэмператур па-за межамі яе працоўнага дыяпазону.
• Абыходжанне з батарэяй: Ensure correct battery polarity. Remove batteries if the device will not be used for an extended period. Dispose of batteries according to local regulations.
• Тэхнічнае абслугоўванне: Only perform maintenance as described in this manual. Refer all other servicing to qualified personnel.
• Умовы навакольнага асяроддзя: Avoid using the device in high humidity, dusty, or explosive environments.

Змест пакета

Verify that all items listed below are present and in good condition upon unpacking.

Image: Complete kit for the VOLTCRAFT IR 2201-50D Infrared Thermometer.

• VOLTCRAFT IR 2201-50D Infrared Thermometer
• Жорсткі футляр для пераноскі
• Міні штатыў
• USB-кабель
• K-Type Temperature Probe
• CD з праграмным забеспячэннем
• Кіраўніцтва карыстальніка (гэты дакумент)

Прадукт скончаныview

The VOLTCRAFT IR 2201-50D is a high-precision infrared thermometer designed for non-contact temperature measurements. Key features include:

• Падвойнае лазернае навядзенне: Provides accurate aiming for precise measurement areas.
• Шырокі дыяпазон тэмператур: Measures from -50 °C to 2200 °C (-58 °F to 3992 °F).
• High Optical Resolution (D:S): 50:1 distance-to-spot ratio for measuring small targets from a distance.
• Хуткі час водгуку: 150 ms for quick readings.
• Рэгуляваны каэфіцыент выпраменьвання: Range from 0.1 to 1.0, allowing for accurate measurements on various surfaces.
• Інтэрфейс USB: For data logging and connection to a computer (software included).
• K-Type Input: Supports external K-type thermocouples for contact temperature measurements.

Выява: спераду view of the thermometer, highlighting the measurement lens and laser emitters.

Выява: Збоку view of the thermometer, showing the display and controls.

Настройка

1. Ўстаноўка батарэі: Open the battery compartment (usually located in the handle). Insert one 9V battery, ensuring correct polarity. Close the compartment securely.
2. Уключэнне: Press the trigger to power on the device. The display will illuminate.
3. Выбар адзінкі: If necessary, use the 'MODE' button to cycle through settings and select your preferred temperature unit (°C or °F). Refer to the on-screen indicators.
4. Рэгуляванне каэфіцыента выпраменьвання: For accurate readings, adjust the emissivity setting (E) to match the surface being measured. Consult a standard emissivity table for common materials. Use the up/down arrow buttons to change the value.
5. K-Type Probe Connection (Optional): If using the K-type probe, insert its connector into the designated K-type input port on the side of the thermometer.
6. Падключэнне USB (неабавязкова): To connect to a computer for data logging, use the provided USB cable. Install the software from the included CD before connecting the device.

Інструкцыя па эксплуатацыі

1. Бескантактнае вымярэнне:
   • Накіруйце тэрмометр на паверхню, на якую вымяраецца тэмпература.
   • Press and hold the trigger. The dual lasers will indicate the measurement area.
   • The temperature reading will appear on the display. Release the trigger to hold the reading.
   • Maintain the specified distance-to-spot ratio (50:1) for optimal accuracy. For example, at 50 inches distance, the measurement spot diameter is 1 inch.
2. K-Type Probe Measurement:
   • Ensure the K-type probe is securely connected.
   • Select the K-type measurement mode using the 'MODE' button.
   • Place the tip of the K-type probe in contact with the surface or substance to be measured.
   • The temperature reading from the probe will be displayed.
3. Data Logging (via USB):
   • Connect the thermometer to your computer using the USB cable.
   • Launch the installed software.
   • Follow the software instructions to configure data logging parameters and start/stop recording measurements.
4. Функцыі адлюстравання: The display may show various indicators such as MAX/MIN temperature, average temperature, differential temperature, and emissivity settings. Use the 'MODE' button to navigate these functions.

Тэхнічнае абслугоўванне

• Уборка:
  • Працярыце прыладу casinг з мяккім, дamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Clean the infrared lens gently with a soft cloth or cotton swab and a small amount of isopropyl alcohol. Avoid scratching the lens.
• захоўванне: Store the thermometer in its hard carrying case in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Замена батарэі: Замяніце батарэйку 9 В, калі на дысплеі з'явіцца індыкатар нізкага зараду батарэі.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

VOLTCRAFT products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official VOLTCRAFT website. Please have your model number (IR 2201-50D) and serial number (if applicable) ready when contacting support.

вытворца: ВАЛТКРАФТ

Інструкцыі па догляду: Clean the device as described in the Maintenance section.