Cornat Cervia 90 cm Chrome Wall Bar Instruction Manual

Прадукт скончаныview

The Cornat Cervia 90 cm Chrome Wall Bar is a functional and adjustable shower rail designed to securely hold your hand shower. Its robust construction and chrome finish ensure durability and easy cleaning. This manual provides essential information for proper installation, operation, and maintenance.

Асноўныя характарыстыкі:

• Functional shower rail for hand shower support.
• Adjustable wall mounts for flexible installation, allowing reuse of existing drill holes.
• Easy attachment of the hand shower via the slider.
• Continuously adjustable push-button for individual height adjustment.
• Strong holding force to prevent accidental slipping of the hand shower.
• High-quality chrome finish for corrosion resistance and easy cleaning.

1. Настройка і ўстаноўка

Before beginning installation, ensure you have all necessary tools and components. The Cornat Cervia Wall Bar is designed for wall mounting via drilling.

1.1 Уключаныя кампаненты

• Shower Bar (90 cm length)
• Adjustable Wall Mounts
• Shower Holder/Slider
• Мантажныя прыналежнасці (шрубы, дзюбелі)

1.2 Неабходныя інструменты (не ўключаны)

• Дрыль
• Drill bit appropriate for wall material and wall plugs
• Аловак
• Вымяральная стужка
• Нівелір
• Адвёртка

1.3 Этапы ўстаноўкі

1. Падрыхтуйце месца ўстаноўкі: Choose a suitable location on your bathroom wall. Ensure there are no hidden pipes or electrical wires behind the drilling points.
2. Адзначыць кропкі свідравання: Hold the shower bar with its wall mounts against the wall at the desired height. Use a spirit level to ensure it is perfectly vertical. Mark the positions for the drill holes through the wall mounts with a pencil. The adjustable wall mounts allow for flexibility if you are reusing existing holes.
3. Свідраваць адтуліны: Drill holes at the marked positions using the appropriate drill bit for your wall material. Insert the wall plugs into the drilled holes.
4. Attach Wall Mounts: Secure the wall mounts to the wall using the provided screws. Do not overtighten.
5. Mount the Shower Bar: Slide the shower bar into the attached wall mounts. Ensure it is firmly seated.
6. Install Shower Holder: Slide the shower holder onto the bar. It should move freely but hold its position when adjusted.
7. Канчатковая праверка: Gently pull on the installed bar to ensure it is securely fixed to the wall.

2. Інструкцыя па эксплуатацыі

The Cornat Cervia Wall Bar is designed for simple and convenient use of your hand shower.

2.1 Attaching the Hand Shower

To attach your hand shower, simply insert the conical end of your shower hose into the opening of the shower holder. The design ensures a secure fit.

2.2 Рэгуляванне вышыні і вугла

• Рэгуляванне вышыні: Press the push-button on the shower holder to release its grip on the bar. Slide the holder up or down to your desired height. Release the button to lock the holder in place. The continuous adjustment allows for personalized positioning.
• Рэгуляванне кута: The shower holder also allows for individual adjustment of the hand shower's tilt angle. Gently pivot the hand shower within the holder to direct the water flow as needed.

The strong holding force of the shower holder prevents the hand shower from accidentally slipping down the bar during use.

3. Тэхнічнае абслугоўванне і догляд

Proper maintenance will ensure the longevity and appearance of your Cornat Cervia Wall Bar.

3.1 Ачыстка

• Regularly clean the chrome surface with a soft, damp тканіна.
• For stubborn stains or limescale, use a mild, non-abrasive bathroom cleaner specifically designed for chrome finishes.
• Avoid using abrasive sponges, harsh chemicals, or acidic cleaners, as these can damage the chrome plating.
• Пасля мыцця старанна прамыйце чыстай вадой і высушыце мяккай тканінай, каб пазбегнуць плям ад вады.

3.2 Агляд

Periodically check the wall mounts and screws for tightness. If any components appear loose, gently tighten them to ensure the bar remains secure.

4. Выпраўленне непаладак

This section addresses common issues you might encounter with your Cornat Cervia Wall Bar.

4.1 Shower Holder Slips Down

• Праблема: The shower holder does not stay in place and slides down the bar.
• рашэнне: Ensure the push-button mechanism is fully released after adjusting the height. If the issue persists, inspect the internal mechanism of the holder for any debris or wear.

4.2 Wall Bar Feels Loose

• Праблема: The entire wall bar feels wobbly or loose on the wall.
• рашэнне: Check the screws securing the wall mounts. Gently tighten them if they are loose. If the problem persists, the wall plugs or drill holes might be compromised, requiring re-installation with new plugs or in a slightly different position.

4.3 Chrome Finish Discoloration

• Праблема: The chrome surface shows signs of discoloration or rust.
• рашэнне: This can be caused by harsh cleaning agents or prolonged exposure to moisture without drying. Refer to the "Maintenance and Care" section for proper cleaning instructions. For existing discoloration, try a specialized chrome polish, but avoid abrasive products.

5. Тэхнічныя характарыстыкі

6. Гарантыя і падтрымка

Specific warranty details for the Cornat Cervia Wall Bar are not provided in the product information. Please refer to your purchase documentation or contact the retailer for warranty information.

For further assistance or technical support, please contact Cornat customer service or your local distributor. Contact information can typically be found on the manufacturer's official webсайце або на ўпакоўцы вашага прадукту.