1. Уводзіны
The Keenso 12V DC Power Relay Capacitor Filter Rectifier is designed to provide a stable 12V DC power supply to your car's rear view camera. This device effectively addresses common issues such as "screen cyclowarp" or a "black screen" that can occur when using a rear camera in certain vehicle series, particularly Germany/American car models. Its compact design and robust construction ensure reliable performance and a long service life.
Image 1: The Keenso 12V DC Power Relay Capacitor Filter Rectifier. This device stabilizes the 12V DC power to your rear camera, resolving screen issues.
2. Настройка і ўстаноўка
This rectifier is designed for straightforward installation without requiring complex modifications. Follow the wiring instructions carefully to ensure proper functionality.
2.1 Інструкцыі па падключэнні
- Input Red Wire: Connect to the Reversing Light Positive Pole.
- Input Black Wire: Connect to the Reversing Light Negative Pole.
- Output Red Wire: Connect to the Camera Positive Pole.
- Output Black Wire: Connect to the Camera Negative Pole.
Image 2: Detailed wiring instructions for connecting the rectifier to your vehicle's reversing light and camera.
Image 3: Visual representation of the wiring connections for the car camera filter. Input wires are labeled 1 and 2, output wires are labeled 3 and 4.
2.2 Фізічныя памеры
The compact size of the rectifier allows for flexible placement during installation.
Image 4: The physical dimensions of the rectifier are approximately 4.8 cm (1.9 inches) in length, 2.6 cm (1.0 inch) in width, and 1.5 cm (0.6 inches) in height.
2.3 Відэакіраўніцтва па ўсталёўцы
Video 1: This video demonstrates the physical handling and appearance of the Keenso Car Rear View Rectifier, providing a visual overview вырабу перад устаноўкай.
Video 2: This video provides an additional perspective on the Keenso Car Rear View Rectifier, showcasinяго канструкцыю і кампаненты.
3. Аперацыя
Once correctly installed, the Keenso 12V DC Power Relay Capacitor Filter Rectifier operates automatically. It filters and stabilizes the 12V DC power supplied to your rear view camera, ensuring a consistent and clear video feed. This prevents visual distortions such as flickering, rolling lines, or a completely black screen, which are often caused by unstable power from the vehicle's reversing light circuit.
Выява 5: Былы/былаяample of a clear rear view camera display, demonstrating the intended outcome of using the rectifier to stabilize the video signal.
4. Тэхнічнае абслугоўванне
The Keenso Power Relay Capacitor Filter Rectifier is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:
- Захоўваць сухім: Avoid exposing the device to excessive moisture or water.
- Праверце злучэнні: Перыядычна правярайце ўсе злучэнні правадоў, каб пераканацца ў іх надзейнасці і адсутнасці карозіі.
- Акуратна чысціце: If necessary, gently wipe the exterior with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Пазбягайце фізічных пашкоджанняў: Ensure the device is installed in a location where it is protected from physical impact or crushing.
5. Выпраўленне непаладак
If you experience issues with your rear view camera after installing the rectifier, consider the following troubleshooting steps:
- No Image or Black Screen:
- Verify that all input and output wires are correctly connected according to the wiring diagram (Image 2, Image 3).
- Ensure the reversing light is receiving power when reverse gear is engaged.
- Check the camera's power connection to the rectifier's output.
- Мігценне або нестабільнае малюнак:
- Confirm that the rectifier's input wires are securely connected to the reversing light's positive and negative poles. Loose connections can cause instability.
- Ensure the camera's power and ground connections from the rectifier are solid.
- In some cases, interference can still occur if the vehicle's electrical system has significant noise. While the rectifier is designed to mitigate this, extreme cases might require further electrical system diagnosis.
- Няправільная палярнасць: Double-check that the positive and negative wires are connected to their respective poles. Incorrect polarity can prevent the device from functioning.
- Пашкоджанне прылады: Inspect the rectifier for any visible signs of damage. If damage is present, the unit may need replacement.
6. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | Кінсо |
| Нумар мадэлі | 2698807359 |
| Нумар дэталі | Keensoca6m9t4y0b |
| Тып раздыма | Прыпой |
| Кантактны матэрыял | медзь |
| Тып кантакту | Звычайна адкрыты |
| Тып мацавання | Кранштэйн для DIN |
| Рэжым працы | Аўтаматычны |
| Шпулька Voltage | 12 вольт |
| Максімальны аб'ём пераключэнняtage | 12 вольт |
| Мінімальны аб'ём пераключэнняtage | 12 вольт |
| Памеры (прыбл.) | 4.8 х 2.6 х 1.5 см (1.9 х 1.0 х 0.6 цалі) |
7. Гарантыя і падтрымка
Keenso provides a worry-free guarantee for this 12V DC power filter rectifier. Each unit undergoes testing before shipping to ensure product quality and functionality. In the event of any issues, Keenso offers a money refund or new replacement.
For any questions or support needs, please contact Keenso customer service via email or the Q&A section on the product page. Please refer to your purchase documentation for specific contact details.