Pyramid PS12KX.5

Pyramid Universal Compact Bench Power Supply PS12KX.5 Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the safe and efficient operation of your Pyramid Universal Compact Bench Power Supply, model PS12KX.5. This linear regulated power supply is designed to convert 115V AC input to a constant 13.8V DC output, providing up to 10 amps continuous and 12 amps surge current. It is suitable for various applications including powering cellular phones, CB radios, scanners, and HAM radios.

Pyramid PS12KX.5 Bench Power Supply front view

Выява 1.1: Спераду view of the Pyramid PS12KX.5 Bench Power Supply.

Для візуальнага аглядуview of the product, please watch the following video:

Відэа 1.1: Афіцыйны прадукт скончаныview of the Pyramid Universal Compact Bench Power Supply.

2. Важныя інструкцыі па бяспецы

  • Прачытайце ўсе інструкцыі: Before operating the power supply, read and understand all safety and operating instructions.
  • Толькі для выкарыстання ў памяшканнях: This unit is designed for indoor use in dry locations. Do not expose it to rain or moisture.
  • Правільная вентыляцыя: Ensure adequate ventilation around the unit. Do not block ventilation openings. The built-in cooling fan requires clear airflow.
  • Крыніца харчавання: Connect the power supply only to a 115V AC, 60Hz outlet.
  • Зазямленне: Ensure the power cord is properly grounded.
  • Пазбягайце перагрузкі: Do not exceed the rated output current of 10 amps бесперапынны або 12 amps surge. Overloading can cause damage to the unit and connected devices.
  • Абарона ад кароткага замыкання: The unit features electronic overload and short circuit protection. In case of a short circuit, the unit will automatically protect itself. Remove the short and cycle the power to reset.
  • тэмпература: Do not operate the unit in excessively hot environments. The internal cooling fan helps manage temperature.
  • Абслугоўванне: Не спрабуйце абслугоўваць гэту прыладу самастойна. Звяртайцеся па любыя паслугі па абслугоўванні да кваліфікаванага персаналу.

3. Прадукт скончыўсяview

3.1 Пярэдняя панэль

Front panel of Pyramid PS12KX.5 showing indicators, output terminals, and power switch

Малюнак 3.1: Падрабязны view пярэдняй панэлі.

  • NORMAL LED (Green): Illuminates when the power supply is operating normally.
  • PROTECTION LED (Red): Illuminates when the unit enters protection mode due to overload, short circuit, or over-temperature.
  • OUTPUT Terminals: Red (+) for positive, Black (-) for negative DC output. These are screw-type terminals for secure connections.
  • Выключальнік сілкавання: Toggles the unit ON/OFF.

3.2 Задняя панэль

Rear panel of Pyramid PS12KX.5 showing AC input, cooling fan, and fuse

Малюнак 3.2: Падрабязны view of the rear panel.

  • Уваход пераменнага току: Standard 3-prong AC power cord connection.
  • Вентылятар астуджэння: Automatically activates to dissipate heat during operation.
  • Засцерагальнік: Provides additional protection. Refer to specifications for fuse rating.

4. Настройка

  1. Размяшчэнне: Place the power supply on a stable, flat surface. Ensure there is sufficient space around the unit for proper ventilation, especially around the side and rear cooling vents.
  2. Збоку view of Pyramid PS12KX.5 showing cooling vents

    Малюнак 4.1: Збоку view illustrating cooling vents.

  3. Падключэнне да сеткі пераменнага току: Ensure the power supply's ON/OFF switch is in the OFF position. Connect the supplied AC power cord to the AC input on the rear panel of the power supply, then plug the other end into a standard 115V AC, 60Hz wall outlet.
  4. DC Load Connection: Identify the positive (+) and negative (-) terminals on your DC device. Using appropriate gauge wire, connect the positive wire from your device to the RED (+) output terminal on the power supply. Connect the negative wire from your device to the BLACK (-) output terminal. Ensure all connections are tight and secure to prevent arcing or poor contact.

5. Інструкцыя па эксплуатацыі

  1. Уключэнне: After ensuring all connections are secure, flip the POWER switch on the front panel to the ON position. The green NORMAL LED should illuminate, indicating normal operation.
  2. Маніторынг: Observe the NORMAL LED. If the red PROTECTION LED illuminates, the unit has entered protection mode. Refer to the Troubleshooting section for guidance.
  3. Выключэнне: To turn off the power supply, flip the POWER switch to the OFF position. Disconnect the DC load if the device will not be used for an extended period.

6. Тэхнічнае абслугоўванне

  • Уборка: Keep the power supply clean and free of dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
  • Вентыляцыя: Regularly check that the cooling fan and ventilation openings are not obstructed by dust or debris. Blocked vents can lead to overheating.
  • Замена засцерагальніка: If the unit fails to power on and the fuse is suspected, disconnect the AC power cord and replace the fuse on the rear panel with one of the identical type and rating (refer to Specifications).

This section outlines common issues and their potential solutions. If you encounter a problem not listed here, or if the suggested solutions do not resolve the issue, contact customer support.

праблемаМагчымая прычынаРашэнне
No power, no LEDs illuminated.Unit not plugged in; AC outlet faulty; Power switch OFF; Blown fuse.Check AC power cord connection; Test AC outlet; Ensure Power switch is ON; Check and replace fuse if necessary (refer to Maintenance).
Red PROTECTION LED is illuminated.Overload; Short circuit at output; Over-temperature.Reduce load current; Check for short circuits at output terminals; Ensure adequate ventilation and allow unit to cool. Cycle power to reset.
No DC output, but NORMAL LED is on.Loose DC output connections; Faulty DC device.Check and tighten DC output terminal connections; Test DC device with another power source if possible.
Unit feels excessively hot.Blocked ventilation; Excessive load.Ensure cooling fan and vents are clear; Reduce load current.

8. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
мадэльPS12KX.5
Уваходны кнtage115V AC, 60Hz
Выхад Voltage13.8V DC (Fixed)
Выхадны ток (пастаянны)10 Amps
Output Current (Surge)12 Amps
Выхад ватtage250 ват
Дызайн блока харчаванняLinear / Regulated
ТэрміналыТып шрубы
Спосаб астуджэнняAir (Built-in Fan)
АховаElectronic Overload, Short Circuit, Over-Temperature, Fuse Protected
Памеры (Д х Ш х У)7.9 х 7.2 х 4.7 цалі
Вага8.73 фунта
КолерЧорны

9. Гарантыя і падтрымка

Pyramid products are designed for reliability and performance. This product is covered by a limited manufacturer's warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or service, please contact Pyramid customer service. Contact information can typically be found on the manufacturer's webсайт або ўваходзіць у склад прадукту.

вытворца: Піраміда

Webсайт: Visit the Pyramid Store on Amazon