Güde 50123 Compressor 412/8/100 User Manual

Уводзіны

This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Güde 50123 Compressor 412/8/100. Please read these instructions carefully before using the compressor and keep them for future reference. This powerful air compressor is designed for various compressed air applications, featuring an oil-lubricated 2-cylinder V-aggregate with direct drive for impressive performance and efficiency.

Інструкцыі па тэхніцы бяспекі

Always observe general safety regulations when operating power tools and compressed air equipment. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Пераканайцеся, што кампрэсар усталяваны на ўстойлівай, роўнай паверхні, каб прадухіліць яго перакульванне.
• Каб пазбегнуць перагрэву, працуйце з кампрэсарам у добра вентыляваным памяшканні.
• Never direct compressed air at people or animals.
• Wear appropriate personal protective equipment, including eye and ear protection.
• Before any maintenance or adjustment, disconnect the compressor from the power supply and ensure the tank is depressurized.
• Regularly check all connections and hoses for leaks or damage.
• Do not modify the compressor or its safety devices.
• Трымайце дзяцей і старонніх асоб далей ад зоны эксплуатацыі.

Прадукт скончаныview

The Güde 50123 Compressor 412/8/100 is equipped with features designed for reliable and efficient operation. Key components include an integrated pressure switch for precise settings, a pressure regulator for easy adjustment of working pressure, and two manometers for monitoring tank and working pressure. Two compressed air couplings allow for simultaneous operation of multiple tools. Safety features include a safety valve and a condensate drain screw.

Figure 1: Full side view of the Güde 50123 Compressor 412/8/100, showing the motor, tank, wheels, and control panel.

Figure 2: Detail of the control panel, highlighting the two pressure gauges, the red pressure regulator, and the two quick-connect compressed air couplings.

Настройка

1. Распакаванне: Асцярожна выміце кампрэсар з упакоўкі. Праверце на наяўнасць пашкоджанняў пры дастаўцы.
2. Кола ў зборы: Attach the sturdy plastic wheels to the designated points on the compressor frame using the provided hardware. This enhances mobility.

Figure 3: Close-up of the durable plastic wheels, essential for moving the compressor.
3. Стабілізатарныя ножкі: Ensure the rubber feet are securely attached to the compressor base for stability during operation.


Малюнак 4: View of the compressor's stable rubber feet and the condensate drain valve located underneath the tank.

4. Праверка ўзроўню алею: Before first use, check the oil level in the compressor pump. Add appropriate compressor oil if necessary, ensuring it reaches the specified mark on the dipstick or sight glass.
5. Электрычнае падключэнне: Connect the compressor to a grounded 230 V, 50 Hz power outlet. Ensure the power circuit can handle the compressor's 2200 W motor power. The connection cable length is 200 cm.

Інструкцыя па эксплуатацыі

1. Уключэнне: Turn on the compressor using the main power switch. The compressor will begin to build pressure in the tank.
2. Маніторынг ціску: Observe the tank pressure manometer (usually the one showing higher pressure) as the tank fills. The compressor will automatically shut off when the maximum pressure of 8 bar is reached.
3. Adjusting Working Pressure: Use the red pressure regulator knob to set the desired working pressure for your tools. Monitor the working pressure manometer (usually the one showing lower pressure) to ensure accuracy.
4. Падключэнне пнеўматычных інструментаў: Attach your compressed air tools to one of the two compressed air couplings. The dual couplings allow for simultaneous use of two tools.
5. Аперацыя: Begin using your air tools. The compressor will cycle on and off automatically to maintain the set tank pressure.
6. Выключэнне: After use, turn off the compressor using the main power switch. Depressurize the tank by opening a coupling or using an air tool until the pressure gauges read zero.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your compressor.

• Адвод кандэнсату: Drain the condensate from the air tank daily or after each use. This prevents corrosion and extends tank life. Locate the drain screw at the bottom of the tank (refer to Figure 4).
• Праверка ўзроўню алею: Check the oil level weekly. Top up with suitable compressor oil if needed.
• Замена алею: Change the compressor oil every 100 operating hours or at least once a year.
• Ачыстка/замена паветранага фільтра: Inspect the air filter regularly. Clean or replace it as necessary to ensure proper air intake and prevent pump damage.
• Генеральная ўборка: Keep the compressor clean and free of dust and debris, especially around the motor and cooling fins, to ensure efficient cooling.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Малюнак 5: Памеры надview of the Güde 50123 Compressor.

Figure 6: Performance graph showing effective delivery quantity versus pressure.

Гарантыя і падтрымка

Güde is committed to providing durable and reliable products. For any issues or professional intervention required for your Güde device, our dedicated service center is available to assist you.

• Запасныя часткі: Our service center stocks suitable spare parts for all our products, including older models, ensuring long-term usability.
• Тэхнічная дапамога: Qualified personnel at our internal service center are available by phone to help you with any problems concerning your Güde device.
• Служба рамонту: If your Güde device requires professional repair, our internal repair service is ready to provide the necessary intervention.

For service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Güde webсайт.