Modecom Oberon Pro Midi Tower Computer Case

1. Уводзіны

The Modecom Oberon Pro Midi Tower is a computer case designed for users seeking a functional and spacious interior with a modern aesthetic. This manual provides essential information for the proper installation, operation, and maintenance of your computer case, ensuring optimal performance and longevity of your components.

Малюнак 1: Пярэдняя і бакавая часткі view of the Modecom Oberon Pro Midi Tower computer case.

2. Інфармацыя па бяспецы

• Заўсёды адключайце блок харчавання ад разеткі перад усталёўкай або зняццем якіх-небудзь кампанентаў.
• Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
• Захоўвайце дробныя дэталі і інструменты далей ад дзяцей.
• Забяспечце належную вентыляцыю вакол корпуса, каб прадухіліць перагрэў.
• Do not attempt to modify the case structure, as this may void your warranty and pose safety risks.

3. Змесціва ўпакоўкі

Verify that all the following items are present in your package:

• Modecom Oberon Pro Midi Tower Computer Case
• Accessory box (screws, standoffs, cable ties)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Асноўныя магчымасці

• Прасторны інтэр'ер: Designed to accommodate high-end components and facilitate good airflow.
• Эфектыўнае астуджэнне: Includes two pre-mounted 120mm fans (front and rear) to prevent component overheating.
• Ўстаноўка без інструментаў: Supports tool-free mounting for SSD/HDD drives and expansion cards.
• Dust Filtration: Features easily dismountable magnetic filters on the top, front, and bottom (under the power supply unit) to keep the interior clean.
• Optimized Cable Management: Provides a system for convenient wiring organization.
• Long PSU Tunnel: Offers a 240mm space for power supplies, simplifying installation and cable arrangement.

5. Настройка і ўстаноўка

5.1. Падрыхтоўка справы

Before installation, remove the side panels of the case. The Oberon Pro features sound-dampening mats on the side panels to reduce noise.

Малюнак 2: Інтэр'ер view showing sound-dampening mats on the side panel.

5.2. Устаноўка мацярынскай платы

Install the necessary standoffs for your motherboard form factor (ATX, Micro ATX, ITX). Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws.

Figure 3: Interior layout with pre-installed rear fan and motherboard tray.

5.3. Drive Installation (SSD/HDD)

The Oberon Pro supports tool-free installation for three 2.5" SSDs and two 3.5" HDDs. The 3.5" HDD bays are located in the power supply tunnel at the bottom of the case. 2.5" SSDs can be mounted on both sides of the motherboard tray.

Figure 4: Dedicated bays for HDD and SSD storage devices.

5.4. Устаноўка блока сілкавання

The case features a long PSU tunnel (240mm) at the bottom. Install your power supply unit into this tunnel and secure it. This design aids in cable management and airflow.

5.5. Expansion Card Installation (PCI/PCIe)

Install your graphics card or other expansion cards into the PCI/PCIe slots. The case supports tool-free mounting for these cards, allowing for easy installation and removal.

Малюнак 5: Задняя частка салона view highlighting the expansion card slots.

5.6. Кіраванне кабелем

Utilize the provided cable routing options and tie-down points behind the motherboard tray to organize cables. This improves airflow and maintains a tidy interior.

6. Сістэма астуджэння

The Oberon Pro comes with two pre-installed 120mm fans, one at the front and one at the rear, to ensure adequate airflow. The maximum height for a CPU cooler is 163mm, and the maximum length for a video card is 395mm, allowing for compatibility with a wide range of components.

7. Тэхнічнае абслугоўванне

To maintain optimal performance and prevent dust buildup, regularly clean the dust filters. The magnetic filters on the top, front, and bottom of the case are easily dismountable for cleaning. Use compressed air or a soft brush to remove accumulated dust.

8. Выпраўленне непаладак

• Няма харчавання: Ensure all power cables are securely connected to the motherboard, power supply, and wall outlet. Check the power button connection to the motherboard.
• Перагрэў: Verify that all fans are spinning correctly and that dust filters are clean. Ensure proper cable management to avoid obstructing airflow.
• Не працуюць парты пярэдняй панэлі: Check that the front panel connectors (USB, audio) are correctly plugged into the motherboard headers.

Figure 6: Front panel I/O ports for connectivity.

9. Тэхнічныя характарыстыкі

Figure 7: Rear exterior view of the computer case.

10. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official Modecom webсайт або звярніцеся да прадаўца. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.