Oasser T1

Oasser T1 Digital LCD Breathalyzer Alcohol Tester User Manual

Мадэль: T1

Уводзіны

This manual provides detailed instructions for the safe and effective use of your Oasser T1 Digital LCD Breathalyzer Alcohol Tester. Please read this manual thoroughly before operating the device and retain it for future reference. This device is designed to estimate blood alcohol content (BAC) for personal reference only and should not be used to determine whether it is safe to operate a vehicle or machinery.

Інфармацыя па бяспецы

  • Do not operate the device immediately after consuming alcohol. Wait at least 20 minutes after drinking, eating, or smoking to ensure accurate readings. Residual alcohol in the mouth can lead to inaccurate results.
  • This device provides an estimate of BAC for personal reference only. It is not a legal instrument and should not be relied upon to determine fitness to drive or perform tasks requiring sobriety.
  • Захоўвайце прыладу ў месцах, недаступных дзецям.
  • Avoid using the device in strong winds, smoke, or highly polluted environments, as this may affect accuracy.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if the device malfunctions.
  • Use only specified batteries (3 AAA). Ensure correct polarity when inserting batteries.

Змест пакета

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • Oasser T1 Digital LCD Breathalyzer
  • 4 x Mouthpieces
  • 3 х ААА батарэі
  • Кіраўніцтва карыстальніка
Oasser T1 Breathalyzer package contents including device, manual, mouthpieces, and box.

Image: Contents of the Oasser T1 Breathalyzer package, showing the device, user manual, four mouthpieces, and the product box.

Прадукт скончаныview

The Oasser T1 Breathalyzer features a compact design with an easy-to-read digital LCD display and a semi-conductor sensor for alcohol detection.

Фронт view of the Oasser T1 Breathalyzer with digital LCD display showing 0.00 %BAC and four mouthpieces.

Выява: спераду view of the Oasser T1 Breathalyzer, displaying "0.00 %BAC" on its digital LCD screen, alongside four transparent mouthpieces.

Кампаненты:

  • Mouthpiece Port: Where the disposable mouthpiece is inserted.
  • ВК-дысплей: Shows BAC readings, battery status, and operational prompts.
  • Кнопка харчавання: Used to turn the device on/off and initiate testing.
  • Батарэйны адсек: Размешчаны на задняй панэлі, змяшчае 3 батарэйкі тыпу ААА.

Настройка

  1. Усталюйце батарэі: Open the battery compartment cover on the back of the device. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the cover securely.
  2. Attach Mouthpiece: Select one of the provided mouthpieces. Insert it firmly into the mouthpiece port located on the top edge of the breathalyzer.
Hand holding the Oasser T1 Breathalyzer with a mouthpiece attached, and three additional mouthpieces.

Image: A hand holding the Oasser T1 Breathalyzer with a mouthpiece already inserted, demonstrating how to attach it. Three spare mouthpieces are visible next to the device.

Інструкцыя па эксплуатацыі

Follow these steps for an accurate breath alcohol test:

  1. Уключэнне: Press and hold the power button for approximately 1 second. The device will emit a beep, and the LCD display will light up.
  2. Размінка: The device will display "WARM UP" and count down from 10 to 0. This indicates the sensor is preparing for testing.
  3. Пачаць тэст: Once the warm-up is complete, the device will display "BLOW" and count down from 10 to 0. During this time, take a deep breath.
  4. Blow into Mouthpiece: Place your lips around the mouthpiece and blow steadily and continuously for about 5 seconds until you hear a beep. Ensure no air escapes from the sides of your mouth.
  5. View Вынікі: After blowing, the device will process the sample and display your estimated BAC on the LCD screen. The result will be shown for approximately 10 seconds.
  6. Выключэнне: The device will automatically power off after displaying the result for a few seconds, or you can press and hold the power button to turn it off manually.
Man using the Oasser T1 Breathalyzer in a car, blowing into the mouthpiece.

Image: A man demonstrating the use of the Oasser T1 Breathalyzer while seated in a car, blowing into the attached mouthpiece.

Understanding Results

The Oasser T1 Breathalyzer displays results in %BAC (Blood Alcohol Content). The interpretation of these results is for informational purposes only.

  • 0.00% BAC: Indicates no alcohol detected.
  • Low BAC Readings: Small amounts of alcohol detected.
  • Higher BAC Readings: Indicates increased alcohol presence.

Important: Legal limits for driving vary by region. A low reading does not guarantee that you are fit to drive or that you are below the legal limit. Always exercise caution and responsible judgment.

Тэхнічнае абслугоўванне

  • Уборка: Працярыце знешні выгляд прылады мяккай, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі і не апускайце прыладу ў ваду.
  • Mouthpieces: The provided mouthpieces are reusable after cleaning. Wash them with warm water and mild soap, then rinse thoroughly and allow them to air dry completely before reuse. Replace mouthpieces if they show signs of wear or damage.
  • захоўванне: Store the breathalyzer in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period to prevent leakage.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Прылада не ўключаецца.Разраджаныя або няправільна ўстаўленыя батарэйкі.Замяніце батарэйкі новымі батарэйкамі тыпу AAA, сачыце за правільнай палярнасцю.
Няправільныя або супярэчлівыя паказанні.
  • Tested too soon after drinking/eating/smoking.
  • Недастатковае дыханне sampле.
  • Мундштук няправільна прымацаваны.
  • Умяшанне ў навакольнае асяроддзе.
  • Wait at least 20 minutes before testing.
  • Ensure a steady, continuous blow for 5 seconds.
  • Re-attach mouthpiece firmly.
  • Test in a clean, calm environment.
«Err» або іншае паведамленне пра памылку на дысплеі.Sensor malfunction or improper operation.Turn off the device, wait a few minutes, and try again. If the error persists, contact customer support.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Тып датчыкаSemi-conductor alcohol sensor
ДысплейЛічбавы ВК з падсветкай
Дыяпазон вымярэнняў0.00 - 0.19% BAC (or equivalent)
Увод магутнасці3 x AAA 1.5V Alkaline Batteries
Працоўная тэмпература10°C - 50°C (50°F - 122°F)
Тэмпература захоўвання0°C - 40°C (32°F - 104°F)
ПамерыApproximately 110mm x 60mm x 20mm (4.33in x 2.36in x 0.79in)
ВагаApproximately 6.08 ounces (with batteries)
Oasser T1 Breathalyzer next to a smartphone, showing dimensions: 110mm/4.33in length, 60mm/2.36in width, 20mm/0.79in thickness.

Image: The Oasser T1 Breathalyzer positioned next to a smartphone, illustrating its compact size and providing specific dimensions for length, width, and thickness.

Гарантыя і падтрымка

Oasser products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Oasser webсайт.

Калі ласка, захавайце доказы пакупкі для прэтэнзій па гарантыі.

© 2023 Oasser. Усе правы абаронены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.