1. Уводзіны
The HENDI Automatic Water Softener, Model 230459, is an advanced system designed for commercial use to effectively prevent limescale buildup in plumbing installations. This unit operates at 230V and 18W, ensuring efficient and reliable water treatment. By reducing mineral deposits, it helps extend the lifespan of your appliances and maintain optimal water flow.
Малюнак 1: Спераду view of the HENDI Automatic Water Softener, Model 230459.
2. Інфармацыя па бяспецы
This is a commercial product not intended for domestic use.
Always adhere to local regulations and safety standards during installation, operation, and maintenance. Disconnect power before performing any service or maintenance. Ensure proper grounding to prevent electrical hazards. Keep the unit away from direct sunlight and extreme temperatures.
3. Асаблівасці прадукту
- Працоўны ціск: 1.5 - 6.0 бар
- Працоўная тэмпература навакольнага асяроддзя: 5 - 38 °C
- Output for 10°dH: 1200 літра
- Панэль кіравання: Allows configuration of operating time, regeneration time, and treated water quantity.
- Аўтаматычная блакіроўка: Prevents unauthorized access to settings.
- Блакіроўка ад дзяцей: Special function to prevent accidental changes.
4. Настройка і ўстаноўка
The HENDI Automatic Water Softener is designed for installation on the main water line. It should be installed before the water line splits to the water heater or other plumbing fixtures to ensure all water entering the system is treated.
- Выбар месцазнаходжання: Choose a dry, level area with adequate space for installation and future access. Ensure the ambient temperature remains within 5 – 38 °C.
- Падключэнне да водазабеспячэння: Connect the unit to the main water supply line. Ensure all connections are secure and leak-free.
- Зліўнае злучэнне: Connect the drain line according to local plumbing codes.
- Электрычнае падключэнне: Connect the unit to a grounded 230V electrical outlet.
- Першапачатковы запуск: Follow the operating instructions to initiate the first regeneration cycle and configure settings.
Note on Iron Content: If your source water has iron levels exceeding 0.3 ppm, it is recommended to use an iron removal filter before the water softener to ensure optimal performance and longevity of the unit.
5. Інструкцыя па эксплуатацыі
The unit features an intuitive control panel for managing its functions. Refer to the display and buttons for configuration.
Figure 2: Close-up of the control panel with display and buttons.
- Setting Operating Time: Use the control panel to set the desired operating schedule for the unit.
- Configuring Regeneration Time: Adjust the regeneration cycle frequency and duration based on your water hardness and usage.
- Adjusting Treated Water Quantity: Set the volume of water to be treated before a regeneration cycle is initiated.
- Аўтаматычная блакіроўка: The system includes an automatic lock feature to prevent unintended changes to the settings. Consult the on-screen prompts for activation/deactivation.
- Блакіроўка ад дзяцей: Activate the child lock function through the control panel to secure settings from accidental tampэрынг.
6. Тэхнічнае абслугоўванне
The HENDI Automatic Water Softener Model 230459 is designed for minimal maintenance after initial setup. Regular checks are recommended to ensure optimal performance.
- Перыядычная праверка: Visually inspect the unit and connections for any signs of leaks or damage.
- Уборка: Keep the exterior of the unit clean and free from dust and debris. Use a soft, damp тканіну для чысткі. Не выкарыстоўвайце абразіўныя ачышчальныя сродкі.
- Узровень солі: This unit operates using an ion exchange method, which typically requires salt for regeneration. Ensure the salt reservoir is adequately filled. Refer to the control panel for indicators and specific instructions on salt replenishment.
7. Выпраўленне непаладак
If you encounter issues with your HENDI Automatic Water Softener, please refer to the following common troubleshooting steps:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Прылада не ўключаецца | Няма харчавання; дрэннае злучэнне | Check power cable and outlet. Ensure unit is properly plugged in. |
| Water still hard | Incorrect settings; low salt level; high iron content; unit malfunction | Verify control panel settings. Check and refill salt reservoir. Test water for iron levels and consider a pre-filter if needed. Contact support if problem persists. |
| На дысплеі паведамленне пра памылку | Унутраная памылка; праблема з датчыкам | Запішыце код памылкі і звярніцеся да поўнага кіраўніцтва па эксплуатацыі прадукта або звярніцеся ў службу падтрымкі кліентаў. |
For issues not listed here, or if solutions do not resolve the problem, please contact HENDI customer support.
8. Тэхнічныя характарыстыкі
| Атрыбут | Дэталь |
|---|---|
| Вытворца | ХЕНДЫ |
| Нумар мадэлі | 230459 |
| Памеры прадукту | 56 х 42 х 24.5 см (22 х 16.5 х 9.6 цалі) |
| Вага | 9.94 кг (21.9 фунтаў) |
| тtage | 230 вольт |
| Энергаспажыванне | 18 ват |
| Працоўны ціск | 1.5 - 6.0 бар |
| Працоўная тэмпература навакольнага асяроддзя | 5 - 38 °C |
| Хуткасць патоку | 5 літраў у хвіліну |
| Capacity (10°dH) | 1200 літра |
| Матэрыял | Керамічны |
| Спосаб ўстаноўкі | корпусная |
| Метад ачысткі | Ion Exchange |
| Асаблівасці | Блакіроўка ад дзяцей |
9. Інфармацыя аб гарантыі
HENDI products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official HENDI webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.
10. Падтрымка
For technical assistance, spare parts, or further inquiries regarding your HENDI Automatic Water Softener, please contact HENDI customer service. Contact details can be found on the HENDI webна сайце або ў дакументацыі, якая пастаўляецца з вашым прадуктам.
ХЕНДЫ Webсайт: www.hendi.eu