Seco-Larm E-960-D90GQ Twin Photobeam Detector

1. Уводзіны

The Seco-Larm E-960-D90GQ is a high-performance twin photobeam detector designed for reliable perimeter security in both indoor and outdoor environments. It features advanced lensed optics and a built-in laser beam alignment system for quick and precise installation, minimizing false alarms caused by environmental factors.

2. Асноўныя магчымасці

• Twin Beams: Designed to minimize false alarms from small objects like falling leaves or birds.
• Lensed Optics: Reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, or mist.
• Ўстойлівы да надвор'я дызайн: Features a sunlight-filtering case suitable for outdoor use.
• Non-polarized Power Inputs: Simplifies wiring during installation.
• Anti-frost System: Ensures reliable operation in cold conditions.
• Automatic Input Power Filtering: Includes special noise rejection circuitry for stable performance.
• NO/NC Trigger Output: Provides flexible alarm output options.
• НК Тamper Circuit: Enhances security by detecting unauthorized tampэрынг.
• Built-in Laser Beam Alignment: Facilitates quick and accurate installation.
• Monitored Output: N.C. or 10kΩ resistor on N.O. output for system monitoring.

3. Настройка і ўстаноўка

The E-960-D90GQ is designed for straightforward installation. Ensure proper alignment for optimal performance.

3.1 Мантаж

Use the included U-brackets for pole mounting. Ensure the units are mounted securely and are stable to prevent misalignment.

3.2 Электраправодка

Connect the power supply (12~30 VDC/VAC 60Hz, 200mA) to the non-polarized power inputs. Connect the alarm output (SPDT NO/NC/COM relay, 1A@30VDC/VAC) and tamper output (N.C. switch, 1A@30VDC/VAC) to your security system as required.

3.3 Laser Beam Alignment

The built-in laser beam alignment system significantly simplifies the setup process. Both the transmitter and receiver units have lasers to assist in aligning them with each other.

Activate the laser alignment feature on both units. Adjust the horizontal (±90°) and vertical (±5°) alignment angles until the laser beams from each unit are precisely aimed at the corresponding receiver on the opposite unit. This ensures the most effective detection and minimizes false alarms.

4. Аперацыя

Once installed and powered, the photobeam detector operates by maintaining an invisible infrared beam between the transmitter and receiver. Interruption of this beam triggers an alarm output.

4.1 Святлодыёдныя індыкатары

• Чырвоны святлодыёд: Illuminates when the transmitter and receiver are not aligned, or when the beam is broken (alarm condition).
• Жоўты святлодыёд: Indicates a weak receiver signal or a partially obstructed beam. Proper alignment is crucial to keep this LED off.
• Зялёны святлодыёд: Illuminates when the unit is connected to power, indicating normal power supply.

5. Тэхнічнае абслугоўванне

The E-960-D90GQ is designed for low maintenance. Periodically inspect the units for any physical damage or obstructions. Keep the lenses clean from dirt, dust, or spiderwebs to ensure optimal beam transmission and reception. The anti-frost system helps prevent ice buildup in cold environments.

6. Выпраўленне непаладак

• No Power (Green LED Off): Check power connections and ensure the operating voltage (12~30 VDC/VAC) is supplied correctly.
• Constant Red LED: Indicates a persistent beam interruption or misalignment. Re-align the units using the laser alignment system. Check for any physical obstructions between the units.
• Constant Yellow LED: Suggests a weak signal. This could be due to slight misalignment, dirty lenses, or environmental factors like heavy fog. Clean lenses and re-align if necessary.
• Ілжывыя трывогі: While twin beams minimize false alarms, ensure the units are securely mounted and not subject to vibration. Verify proper alignment and clean lenses.

7. Тэхнічныя характарыстыкі

8. Інфармацыя па бяспецы

Always follow local electrical codes and safety regulations during installation. Do not attempt to disassemble or modify the unit, as this may void the warranty and pose a safety risk. The laser used for alignment is low power, but direct eye exposure should be avoided. Disconnect power before performing any maintenance or wiring.

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Seco-Larm customer service directly. Keep your proof of purchase for warranty claims.