HJC C70 Helmet User Manual

1. Уводзіны

Thank you for choosing the HJC C70 Helmet. This manual provides essential information for the proper use, maintenance, and care of your helmet. Please read this manual thoroughly before using your helmet to ensure maximum safety and to prolong the life of the product.

The HJC C70 Helmet is designed with advanced polycarbonate composite shell technology, offering a lightweight, superior fit, and comfort. It features an aerodynamic shell with a large eye port for greater visibility and an "ACS" Advanced Channeling Ventilation System for optimal airflow.

2. Інфармацыя па бяспецы

Ваша бяспека — найважнейшая. Заўсёды выконвайце наступныя правілы бяспекі:

• This helmet is DOT approved and FMVSS 218 certified for legal on-road motorcycle use in the United States. Ensure your helmet meets local regulations.
• Always wear a properly fitted helmet. An ill-fitting helmet can compromise its protective capabilities.
• Never modify your helmet. Any modifications can weaken its structure and void the warranty.
• Do not expose the helmet to petroleum products or cleaning agents not specifically recommended for helmet use, as these can damage the shell materials.
• Replace your helmet after any impact, even if visible damage is not apparent. The helmet's protective capabilities may be compromised.

3. Асаблівасці прадукту

The HJC C70 Helmet incorporates several key features for enhanced performance and user experience:

• Advanced Polycarbonate Composite Shell: Provides a lightweight design with superior fit and comfort, developed using advanced CAD technology.
• "ACS" Advanced Channeling Ventilation System: Full front-to-back airflow flushes heat and humidity up and out, ensuring optimal ventilation.
• Мікрапражка: Features a quick-release and adjustable retention system for secure fastening.
• Rapidfire™ Shield Replacement System: Simple and secure shield ratchet system provides ultra-quick, tool-less removal and installation for efficient operation.
• Aerodynamic Shell: Designed with a large eye port for greater peripheral visibility.

Малюнак 3.1: Спераду view of the HJC C70 Helmet, showcasing the clear visor and ventilation system.

Малюнак 3.2: Задняя частка view of the HJC C70 Helmet, highlighting the exhaust vents and aerodynamic shape.

4. Усталёўка і мантаж

4.1 Распакаванне

Upon receiving your HJC C70 Helmet, carefully remove it from its packaging. The box should contain:

• One HJC C70 Helmet
• One Helmet Shield (pre-installed or separate)
• One Helmet Bag
• Гэта кіраўніцтва карыстальніка

4.2 Правільная пасадка

A helmet must fit snugly to provide optimal protection. Follow these steps to check for a proper fit:

1. Place the helmet on your head, ensuring it sits level and the top of the eye port is just above your eyebrows.
2. Fasten the chin strap securely using the Micro Buckle system. The strap should be snug under your chin, without causing discomfort.
3. With the chin strap fastened, try to move the helmet from side to side and front to back. The helmet should feel snug and move your skin with it, rather than sliding independently on your head.
4. Check for pressure points. While a snug fit is necessary, there should be no uncomfortable pressure points.

5. Кіраванне шлемам

5.1 Visor Operation

The HJC C70 Helmet features a clear visor for eye protection. To open or close the visor, gently lift or pull down on the tab located at the bottom center of the visor. The Rapidfire™ Shield Replacement System allows for quick, tool-less removal and installation of the visor.

5.2 Сістэма вентыляцыі

The "ACS" Advanced Channeling Ventilation System provides adjustable airflow. Locate the intake vents on the front of the helmet and the exhaust vents at the rear. Adjust the sliders on the vents to control the amount of airflow through the helmet, optimizing comfort in various riding conditions.

6. Тэхнічнае абслугоўванне і догляд

6.1 Знешняя ачыстка

To clean the helmet's exterior, use a soft cloth dampened with mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the helmet's finish and materials. Rinse thoroughly and air dry.

6.2 Cleaning the Visor

The visor should be cleaned with a soft, lint-free cloth and warm water. For stubborn dirt or insects, soak the visor in warm water for a few minutes before gently wiping clean. Do not use harsh chemicals or paper towels, which can scratch the visor surface.

6.3 Уборка салона

The interior padding of the HJC C70 Helmet is removable for cleaning. Gently detach the cheek pads and liner. Hand wash them with mild soap and water, then air dry completely before re-installing. Ensure all components are dry to prevent mildew.

6.4 Захоўванне

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided helmet bag to protect it from dust and scratches when not in use.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі і падтрымцы кліентаў, звярніцеся да афіцыйнага прадстаўніка HJC. webсайт або звярніцеся да аўтарызаванага дылера HJC. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

HJC is committed to providing high quality, comfortable, and reasonably priced helmets to motorcyclists around the world, backed by decades of specialized manufacturing experience.

Каб атрымаць дадатковую дапамогу, вы можаце наведаць Крама HJC на Amazon.