Zerone Zeronek1gfg26oth-02

Zerone Digital Alarm Clock (Model Zeronek1gfg26oth-02) Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the setup, operation, and maintenance of your Zerone Digital Alarm Clock, Model Zeronek1gfg26oth-02. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Інфармацыя па бяспецы і меры засцярогі

  • Use the clock in a dry environment. Avoid prolonged exposure to wet conditions, high temperatures, or areas with rapid temperature changes.
  • Handle the clock with care to prevent damage.
  • When using batteries, ensure they are high-quality AAA alkaline batteries. If the display dims or blinks, replace the batteries promptly. Prevent battery leakage by replacing old batteries.
  • If the clock is not powered, verify that batteries are correctly inserted or the USB power source is connected.
  • When using a USB power adapter, ensure it is a compatible DC 5V/500mA adapter.

3. Змесціва ўпакоўкі

Upon opening the package, please verify that all accessories are present:

  • Digital Wooden Clock (1 pc)
  • User's Manual (1 pc)
  • USB Charging Cable (1 pc)

4. Прадукт скончыўсяview

The Zerone Digital Alarm Clock features a modern cube design with an LED display that shows time and temperature. It includes multiple alarm settings and adjustable brightness.

Zerone Digital Alarm Clock front view showing time 19:23

Малюнак 4.1: Фронт view of the Zerone Digital Alarm Clock displaying the time.

Zerone Digital Alarm Clock with icons for Clock, Alarm, Thermometer, and Sound Control

Малюнак 4.2: Key features indicated by icons: Clock, Alarm, Thermometer, and Sound Control.

4.1. Кампаненты і кнопкі

The clock features a minimalist design with control buttons located on the back panel.

  • Кнопка SET: Выкарыстоўваецца для ўводу і пацверджання налад.
  • Кнопка UP: Used to increase values or navigate settings.
  • Кнопка ўніз: Used to decrease values or navigate settings. Also controls sound control mode.
  • Кнопка скіду: A small recessed button to reset the clock to factory defaults.
Назад view of the Zerone Digital Alarm Clock showing the battery cover, USB port, and control buttons

Малюнак 4.3: Тыл view of the clock with the battery cover closed, showing the USB power input and control buttons.

5. Настройка

5.1. Уключэнне гадзінніка

The clock can be powered by either 3 AAA batteries or a DC 5V/500mA USB power supply.

  1. Магутнасць батарэі: Open the battery compartment cover on the back of the clock. Insert 3 AAA alkaline batteries, ensuring correct polarity (+/-). Close the cover securely.
  2. USB Харчаванне: Connect the provided USB charging cable to the DC 5V/500mA port on the back of the clock and plug the other end into a compatible USB power adapter (not included) or a USB port.

Note: When powered by batteries, the sound control mode is recommended to conserve power. The display will not show continuously in this mode.

Назад view of the Zerone Digital Alarm Clock with the battery compartment open

Малюнак 5.1: Тыл view with the battery compartment open, showing slots for 3 AAA batteries.

6. Інструкцыя па эксплуатацыі

6.1. Рэжымы адлюстравання

The clock has two main display modes:

  • ДП-1: Displays Time, Temperature, Year, Month, and Date in a rotating sequence.
  • ДП-2: Displays Time continuously.

To switch between DP-1 and DP-2, press the НАБОР кнопку на кароткі час.

6.2. Устаноўка часу і даты

Каб увайсці ў рэжым налад, націсніце і ўтрымлівайце НАБОР button for 3 seconds. The display will show the first setting item (YEAR) flashing.

  1. Пакуль элемент міргае, выкарыстоўвайце UP or УНІЗ кнопкі для рэгулявання значэння.
  2. Націсніце НАБОР button briefly to move to the next setting item.
  3. The setting sequence is: YEAR → MONTH → DATE → 12/24H Format → HOUR → MINUTE → ALARM 1 (AL1) → ALARM 2 (AL2) → ALARM 3 (AL3).
  4. After setting the last item (AL3), the clock will exit the setting mode automatically.

6.3. Налада сігналізацыі

The clock supports three independent alarms (AL1, AL2, AL3). Each alarm sounds for 1 minute.

  1. Enter the setting mode by pressing and holding the НАБОР кнопку на працягу 3 секунд.
  2. Прэса НАБОР repeatedly until you reach the AL1, AL2, or AL3 setting.
  3. When the alarm hour or minute is flashing, use the UP or УНІЗ кнопкі, каб усталяваць патрэбны час будзільніка.
  4. Прэса НАБОР to confirm and move to the next alarm setting or exit.

6.4. Рэгуляванне яркасці

The clock offers three levels of brightness (L1, L2, L3), with L3 being the brightest and L1 the dimmest. Additionally, the display automatically reduces brightness by half between 18:00 (6 PM) and 07:00 (7 AM).

  1. Націсніце і ўтрымлівайце UP button for 3 seconds to enter brightness adjustment mode. The current brightness level (e.g., "L3") will be displayed.
  2. Выкарыстоўвайце UP or УНІЗ buttons to cycle through the brightness levels (L1, L2, L3).
  3. Once the desired brightness is set, press and hold the UP button for 3 seconds again to exit brightness adjustment mode.

6.5. Activating Sound Control Mode

Sound control mode (power-saving mode) is recommended when the clock is powered by batteries. In this mode, the display turns off and activates when a sound is detected (e.g., a clap or tap).

To toggle sound control mode:

  • Націсніце УНІЗ кнопку на кароткі час.
  • "ON:SD" indicates sound control is active.
  • "--:SD" indicates sound control is off, and the display will remain continuously on (if in DP-2 mode).

6.6. Switching Temperature Unit (Celsius/Fahrenheit)

The clock supports both Celsius (C) and Fahrenheit (F) temperature displays.

To switch the temperature unit:

  • Націсніце UP button briefly. The display will toggle between "--:C" (Celsius) and "--:F" (Fahrenheit).
Original instruction sheet for the Zerone Digital Alarm Clock

Малюнак 6.1: Reference image of the original instruction sheet.

7. Тэхнічнае абслугоўванне

  • Працірайце гадзіннік мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Avoid exposing the clock to water or excessive moisture, as this can damage the internal circuitry.
  • Калі гадзіннік не будзе выкарыстоўвацца працяглы час, выміце батарэйкі, каб прадухіліць іх уцечку.

8. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Display is dim or blinking.Нізкі зарад батарэі.Replace AAA batteries or connect to USB power.
Display is off, no time shown.Sound control mode is active and no sound detected; no power.Tap the clock or make a sound to activate display. Check battery installation or USB power connection. Disable sound control mode by pressing УНІЗ button until "--:SD" is shown.
Clock not responding to button presses.Temporary software glitch or improper operation.Use a thin object (like a paperclip) to press the recessed СКІД button on the back of the clock. This will restore default settings.
Time or date is incorrect after power loss.Batteries removed or depleted while USB power was disconnected.Зноў усталюйце час і дату, выконваючы інструкцыі ў раздзеле 6.2.

9. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаНуль
Нумар мадэліZeronek1gfg26oth-02
МатэрыялMDF, PVC
КолерКарычневы
Тып дысплеяЛічбавы святлодыёд
Памеры прадукту6 x 6 x 6 cm (2.36"W x 2.36"H)
Вага прадмета3.87 унцыі
Крыніца харчавання3 x AAA Batteries (not included) OR DC 5V/500mA USB
Узроўні яркасці3 (L1, L2, L3)
Функцыя сігналізацыіYes, 3 groups of alarms
Дысплей тэмпературыYes (Celsius/Fahrenheit)
Фармат часу12-hour or 24-hour mode
АсаблівасціVoice Control Mode, Automatic Half Luminance (18:00-07:00)
Zerone Digital Alarm Clock with dimensions labeled as 6cm or 2.36 inches on each side

Малюнак 9.1: Dimensions of the Zerone Digital Alarm Clock.

10. Гарантыя і падтрымка

For warranty information or technical support, please refer to the product packaging or contact the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

© 2023 Zerone. All rights reserved.