Baseus 10W Automatic Clamping Wireless Car Charger Mount

Baseus 10W Automatic Clamping Wireless Car Charger Mount User Manual

Model: 10W Automatic Clamping Wireless Car Charger Mount

Уводзіны

Thank you for choosing the Baseus 10W Automatic Clamping Wireless Car Charger Mount. This device is designed to provide convenient and fast wireless charging for your Qi-enabled smartphone while securely holding it in your vehicle. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Інфармацыя па бяспецы

  • Не разбірайце і не мадыфікуйце прадукт.
  • Keep away from water, fire, and high temperatures.
  • Пазбягайце моцных удараў або падзення прылады.
  • Забяспечце належную вентыляцыю вакол зараднай прылады падчас выкарыстання.
  • Use only with compatible power sources (QC 3.0 car charger recommended for fast charging).

Змест пакета

  • Baseus Wireless Car Charger Mount
  • Air Vent Clip (1x)
  • Micro USB Cable (4.9ft)
  • Кіраўніцтва карыстальніка

Прадукт скончаныview

The Baseus Wireless Car Charger Mount features an automatic clamping mechanism, Qi wireless charging, and an air vent mounting system. It is designed for easy one-hand operation.

Ключавыя кампаненты:

  • Зарадная панэль: The surface where the phone rests for wireless charging.
  • Аўтаматычная клampЗброя: Securely hold the phone in place.
  • Infrared Induction Sensor: Detects the phone for automatic clampінж.
  • One-Tap Release Button: Located on the side, releases the clampныя рукі.
  • Кліпса для вентыляцыйнай адтуліны: Attaches the mount to your car's air vent.
  • Порт Micro USB: Для падводу магутнасці.

Інструкцыя па наладзе

1. Attaching the Air Vent Clip

  1. Unscrew the nut on the back of the charger mount.
  2. Insert the ball joint of the air vent clip into the nut, then into the socket on the back of the charger.
  3. Tighten the nut to secure the clip to the charger.

2. Mounting to the Car Air Vent

  1. Choose a suitable air vent in your vehicle. The clip is designed for various vent types, as shown in the image below.
  2. Gently push the air vent clip onto one of the vent blades until it is securely attached.
  3. Adjust the angle of the charger mount for optimal viewінж.
Image showing various car air vent types compatible with the Baseus charger mount.

This image illustrates the different types of car air vents that are compatible with the charger mount's clip. Ensure your car's vent matches one of the compatible designs for secure installation.

3. Падключэнне сілкавання

  1. Connect the Micro USB cable to the charging port on the bottom of the charger mount.
  2. Plug the other end of the USB cable into a car charger (not included). For 10W fast charging, a QC 3.0 car charger is required. Standard 5V/2A car chargers will provide 5W charging.
  3. Індыкатар на зараднай прыладзе загарыцца, паказваючы, што яна ўключана і гатовая да выкарыстання.

Інструкцыя па эксплуатацыі

1. Размяшчэнне тэлефона

  1. Hold your Qi-enabled smartphone near the charging pad. The infrared induction sensor will detect your phone.
  2. Аўтаматычны клamping arms will open. Place your phone onto the charging pad.
  3. Клamping arms will automatically close, securing your phone and initiating wireless charging.
Image demonstrating the automatic lock and release function of the Baseus car charger mount.

This image illustrates how the infrared sensor detects a phone, causing the arms to automatically open and then clamp shut once the phone is placed, initiating charging.

2. Выманне тэлефона

  1. To release your phone, gently touch the sensor button located on the right side of the charger mount.
  2. Клamping arms will automatically open, allowing you to remove your phone.

3. Wireless Charging Functionality

The charger supports Qi-enabled phones between 4.0 and 6.5 inches. Charging speeds vary:

  • Хуткая зарадка 10 Вт: For compatible Samsung phones (e.g., Galaxy S10/S9/Note 9). Requires a QC 3.0 car charger.
  • Хуткая зарадка 7.5 Вт: For compatible iPhones (e.g., iPhone Xs/XR/X/8). Requires a QC 3.0 car charger.
  • 5W Standard Charging: For other Qi-enabled devices. Requires a 5V/2A car charger.

Важная заўвага:

  • The thickness of your phone case should not exceed 4mm for optimal charging.
  • Metal cases or foreign objects between the phone and charger will interfere with wireless charging.
Image detailing wireless charging compatibility and power output for different phone models.

This image provides a visual guide to the wireless charging capabilities, showing 10W, 7.5W, and 5W charging for various phone models and the requirement for a QC 3.0 car charger for fast charging.

4. Дэманстрацыйнае відэа прадукту

Watch this video for a visual demonstration of the Baseus Wireless Car Charger Mount's features and operation.

Гэта відэа падрабязна апісваеview and demonstration of the Baseus Wireless Car Charger Mount, showcasing its automatic clamping, wireless charging, and ease of use.

Тэхнічнае абслугоўванне

  • Працірайце паверхню зараднай прылады мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Ensure the air vent clip is free from dust and debris to maintain a secure grip.
  • Regularly check the Micro USB cable for any signs of wear or damage.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Тэлефон не зараджаецца бесправадным спосабам.1. Phone not Qi-enabled.
2. Phone not properly aligned.
3. Phone case too thick or contains metal.
4. Insufficient power input.		1. Verify phone supports Qi wireless charging.
2. Re-position phone on the charging pad.
3. Remove phone case or use a thinner, non-metallic case.
4. Ensure a QC 3.0 car charger is used for fast charging, or a 5V/2A for standard charging.
Clamping arms not opening/closing automatically.1. Няма харчавання на зараднай прыладзе.
2. Sensor obstructed.
3. Няспраўнасць.		1. Check power connection and car charger.
2. Ensure the infrared sensor is clean and unobstructed.
3. Звярніцеся ў службу падтрымкі, калі праблема не знікне.
Charger mount is loose on the air vent.Improper installation or incompatible vent type.Ensure the air vent clip is fully engaged with a vent blade and the nut is tightened. Verify vent compatibility.

Тэхнічныя характарыстыкі

  • Марка: Басейс
  • Тып раздыма: USB, бесправадная сетка
  • Сумяшчальныя прылады: Qi-enabled Smartphones (4.0"-6.5")
  • Сумяшчальныя мадэлі тэлефонаў: iPhone Xs, Xs Max, XR, X, 8, 8 Plus; Samsung Galaxy S10, S10 Plus, S10e, S9, S9 Plus, S8, S8 Plus, S7, S7 edge, S6 edge plus, Note 9, Note 5 series devices.
  • асаблівасць: Хуткая зарадка
  • колер: Чорны
  • Уваходны кнtage: 9 вольт
  • Ampэраж: 1.67 Amps
  • Агульная колькасць партоў USB: 1
  • Вага прадмета: 10.2 унцыі
  • Памеры ўпакоўкі: 8.15 х 4.45 х 2.91 цалі

Гарантыя і падтрымка

This Baseus Wireless Car Charger Mount comes with an Гарантыя 18 месяцаў from the date of purchase. Baseus also provides пажыццёвае абслугоўванне кліентаў для гэтага прадукта.

For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your purchase or visit the official Baseus webсайт.