CISA Serie 604 Door Closer Instruction Manual

Уводзіны

The CISA Serie 604 door closer is designed to provide effective and reliable control over door closing. This model features adjustable closing force (EN 2-4), making it suitable for doors weighing up to 85 kg and with a width of up to 1100 mm. It offers independent adjustments for closing speed and final latching speed, along with an adjustable hold-open function. Its compact design allows for quick installation on both right and left-hand doors, for push or pull side applications.

Інфармацыя па бяспецы

• Перад устаноўкай і выкарыстаннем уважліва прачытайце ўсе інструкцыі.
• Ensure all mounting screws are securely tightened to prevent injury or damage.
• Do not attempt to disassemble the main body of the door closer, as it contains pressurized components.
• Keep hands and fingers clear of moving parts during operation and adjustment.
• Adjustments should only be made by qualified personnel or by carefully following the instructions.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• CISA Serie 604 Door Closer Unit
• Articulated Arm Assembly
• Крапежныя шрубы
• Мантажны шаблон
• Detailed Instructions (this manual)

Настройка і ўстаноўка

The CISA Serie 604 door closer is designed for surface mounting and can be installed on either the push or pull side of right or left-hand doors. Use the provided mounting template for accurate hole placement.

1. Determine Mounting Position: Decide whether to mount the closer on the push side (hinge side) or pull side (opposite hinge side) of the door, and whether it's a right or left-hand door. Refer to the mounting template for specific hole patterns for each configuration.
2. Падрыхтуйце мантажную паверхню: Place the mounting template on the door and/or door frame at the desired height. Mark the drilling points for the closer body and the arm bracket.
3. Прасвідраваць пілотныя адтуліны: Drill pilot holes at the marked positions. Ensure the drill bit size is appropriate for the provided fixing screws.
4. Mount Closer Body: Secure the main door closer body to the door or frame using the fixing screws. Ensure it is level and firmly attached.
5. Assemble and Attach Arm: Assemble the articulated arm components. Attach the main arm to the closer's spindle and the arm bracket to the door frame or door, depending on the mounting configuration. Ensure the arm is correctly oriented and secured.
6. Пачатковая карэкціроўка: After mounting, perform an initial check of the door's closing action. Fine-tune the closing speed and latching speed as described in the 'Operating Instructions' section.

Інструкцыі па эксплуатацыі і рэгуляванні

The CISA Serie 604 door closer offers independent adjustments for closing speed, final latching speed, and a hold-open function to customize door operation.

Adjusting Closing Speed (Valve 1)

This adjustment controls the speed of the door from its fully open position down to approximately 15 degrees from the closed position. Turn the corresponding valve (often marked 'F1' or '1') with a screwdriver:

• па гадзіннікавай стрэлцы: Decreases closing speed (slower).
• Супраць гадзіннікавай стрэлкі: Increases closing speed (faster).

Adjusting Final Latching Speed (Valve 2)

This adjustment controls the speed of the door for the final 15 degrees of closing, ensuring the door latches securely without slamming. Turn the corresponding valve (often marked 'F2' or '2') with a screwdriver:

• па гадзіннікавай стрэлцы: Decreases latching speed (slower, softer close).
• Супраць гадзіннікавай стрэлкі: Increases latching speed (faster, firmer latch).

Adjusting Hold-Open Function

The hold-open function allows the door to remain open at a specific angle. This is typically adjusted by a mechanism on the arm itself, often a friction shoe or a ball-detent system. Consult the specific arm assembly for detailed instructions on engaging and disengaging the hold-open feature and adjusting its tension.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your CISA Serie 604 door closer.

• Уборка: Periodically wipe the door closer body and arm with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Праверце крапежныя элементы: Annually, inspect all mounting screws and arm connections to ensure they remain tight. Re-tighten if necessary.
• змазка: The internal mechanism is factory-lubricated and sealed. No additional lubrication is required. Do not attempt to lubricate the internal components.
• Праверка функцыянальнасці: Regularly observe the door's closing action. If the speed or latching force changes unexpectedly, refer to the 'Operating Instructions' for re-adjustment or the 'Troubleshooting' section for common issues.

Ліквідацыю непаладак

Here are solutions to common issues you might encounter with your door closer.

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

Specific warranty details for the CISA Serie 604 door closer are not provided in the product information. Please refer to the official CISA website or contact your point of purchase for detailed warranty terms and conditions.

Падтрымка

For further assistance, technical support, or to inquire about replacement parts, please visit the official CISA webсайт або звярніцеся ў службу падтрымкі кліентаў. Кантактную інфармацыю звычайна можна знайсці на сайце вытворцы webсайце або на ўпакоўцы прадукту.