Кіраўніцтва карыстальніка сканера LAUNCH CR319 OBD2

1. Уводзіны

The LAUNCH CR319 is a handheld On-Board Diagnostics II (OBD2) code reader designed to assist in diagnosing vehicle engine issues. It provides access to various diagnostic functions to help users identify and clear trouble codes, monitor vehicle performance data, and check emission readiness status. This manual provides detailed instructions for the proper use and maintenance of your CR319 device.

2. Прадукт скончыўсяview

2.1 Асноўныя магчымасці

• Поўныя функцыі OBD2: Supports all 10 OBD2 test modes.
• Бібліятэка пошуку DTC: Built-in database with over 3000 code definitions.
• Шматмоўная падтрымка: Available in English, Portuguese, Russian, Italian, Spanish, French, and German.
• Plug and Play: No batteries or charger required; powered directly from the vehicle's OBD2 port.
• Кампактны дызайн: Лёгкі ў звароце і захоўванні.

2.2 Кампаненты прылады

The image above illustrates the main components of the LAUNCH CR319 OBD2 Scanner. Key parts include the Diagnostic Cable (1) for connecting to the vehicle, the LCD Screen (2) for displaying information, Selection Buttons (3) for navigation, the Down Button (4), the OK Button (5) for confirmation, the ESC Button (6) to return to the previous screen, and the Plug-and-Play Interface (7) which is the OBD2 connector.

3. Настройка

1. Знайдзіце порт OBD2: The OBD2 port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
2. Падключыце сканер: Plug the CR319's diagnostic cable connector firmly into the vehicle's OBD2 port. The device will power on automatically.
3. Запусціце аўтамабіль: Turn the vehicle's ignition to the 'ON' position (engine off) or start the engine, depending on the diagnostic function you intend to perform.

4. Інструкцыя па эксплуатацыі

After connecting the CR319 to your vehicle, the main menu will appear. Use the Up/Down selection buttons to navigate through the options and the OK button to confirm a selection. The ESC button returns to the previous screen.

4.1 Чытайце коды

This function retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer. These codes indicate specific issues detected by the vehicle's self-diagnostic system.

1. У галоўным меню абярыце 'Diagnose'.
2. Выберыце «Чытаць коды».
3. The scanner will display any stored, pending, or permanent codes along with their descriptions.

4.2 Выразныя коды

This function erases DTCs from the vehicle's computer and turns off the Check Engine Light (MIL). Ensure any underlying issues are resolved before clearing codes, as they may reappear.

1. У галоўным меню абярыце 'Diagnose'.
2. Выберыце «Сцерці коды».
3. Пацвердзіце дзеянне, калі з'явіцца запыт. Індыкатар праверкі рухавіка павінен пагаснуць.

4.3 Гатоўнасць I/M

This function checks the status of the vehicle's emission-related monitoring systems to determine if they are ready for an emissions test.

1. У галоўным меню абярыце 'Diagnose'.
2. Выберыце «Імправілізацыйная/М-гатоўнасць».
3. The screen will display the status of various monitors (e.g., Misfire Monitor, Fuel System Monitor). 'OK' or 'Complete' indicates the monitor has run and passed; 'INC' or 'Incomplete' means the monitor has not yet run or completed its diagnostic cycle.

4.4 Data Stream (Live Data)

This function displays real-time operational data from the vehicle's engine control unit (ECU). This data can include engine RPM, vehicle speed, oxygen sensor readings, coolant temperature, and more.

1. У галоўным меню абярыце 'Diagnose'.
2. Выберыце 'Data Stream'.
3. Use the Up/Down buttons to scroll through the various data parameters.

4.5 Стоп-кадр

When an emission-related fault occurs, the vehicle's computer records a snapshot of operating conditions at the time of the fault. This data is called Freeze Frame data.

1. У галоўным меню абярыце 'Diagnose'.
2. Выберыце 'Freeze Frame'.
3. Review the recorded parameters to understand the conditions under which the fault occurred.

4.6 Пошук кода няспраўнасці

This feature allows you to manually enter a Diagnostic Trouble Code and view its definition from the scanner's internal database.

1. У галоўным меню абярыце Пошук дыягнастычных кодаў (DTC).
2. Use the navigation buttons to input the desired DTC.
3. Прэса 'OK' каб view the code definition.

4.7 Other OBD2 Functions

The CR319 also supports the following OBD2 functions, accessible through the 'Diagnose' menu:

• Тэст датчыка O2: Retrieves oxygen sensor monitor test results for the most recently completed tests.
• Праверка сістэмы EVAP (рэжым 8): Пачынае праверку сістэмы кантролю выпарных выкідаў.
• Тэст бартавога манітора (рэжым 6): Атрымлівае вынікі выпрабаванняў кампанентаў і сістэм сілавога агрэгата, звязаных з выкідамі, якія не кантралююцца пастаянна.
• Інфармацыя аб аўтамабілі: Паказвае ідэнтыфікацыйны нумар транспартнага сродку (VIN), ідэнтыфікатар каліброўкі (CALID) і нумар праверкі каліброўкі (CVN).

5. Сумяшчальнасць

The LAUNCH CR319 OBD2 Scanner is compatible with most American, European, and Asian vehicles manufactured from 1996 and newer that are OBDII-compliant. It supports all standard OBDII protocols, including KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network).

5.1 Supported Vehicles

• 12V Gasoline cars.
• Vehicles compliant with OBDII standards (1996 US-based, 2000 EU-based, and newer Asian cars).

5.2 Not Supported Vehicles

• Diesel cars.
• 24V Heavy duty vehicles.
• Hybrid vehicles.
• Electric vehicles.

6. Тэхнічныя характарыстыкі

7. Выпраўленне непаладак

7.1 Прылада не ўключаецца

• Ensure the diagnostic cable is securely connected to the vehicle's OBD2 port.
• Verify the vehicle's ignition is in the 'ON' position or the engine is running.
• Праверце засцерагальнік аўтамабіля для порта OBD2 (звярніцеся да кіраўніцтва карыстальніка вашага аўтамабіля).

7.2 Памылка сувязі з транспартным сродкам

• Confirm the vehicle is OBDII-compliant (generally 1996 and newer for gasoline vehicles).
• Ensure the diagnostic cable is properly connected.
• Turn off the ignition, wait 10 seconds, then turn it back to 'ON' and try again.
• If possible, test the scanner on another compatible vehicle to rule out a device malfunction.

7.3 Codes Cannot Be Cleared

• Ensure the vehicle's ignition is in the 'ON' position (engine off).
• If the underlying fault that triggered the code is still present, the code may not clear or will reappear immediately. Address the vehicle's issue first.

8. Тэхнічнае абслугоўванне

• Уборка: Для чысткі прылады выкарыстоўвайце мяккую сухую тканіну. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
• захоўванне: Захоўвайце сканер у чыстым, сухім месцы, удалечыні ад экстрэмальных тэмператур і прамых сонечных прамянёў.
• Сыход за кабелем: Do not pull the cable forcefully or bend it sharply. Inspect the cable for damage before each use.

9. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please contact LAUNCH customer support. Refer to the product packaging or the official LAUNCH webсайт для атрымання найбольш актуальнай кантактнай інфармацыі.