Nora Lighting Josh LED Puck Light User Manual

Уводзіны

Thank you for choosing the Nora Lighting Josh LED Puck Light. This manual provides essential information for the safe installation, operation, and maintenance of your LED puck light. Please read these instructions thoroughly before installation and and keep them for future reference.

The Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for flexible placement and provides even illumination. This LED fixture is designed for either recessed or surface mounting.

Важная інфармацыя па бяспецы

• ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай засцерагальніка або аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.
• Гэты прадукт павінен быць усталяваны ў адпаведнасці з дзеючым кодам ўстаноўкі асобай, знаёмай з канструкцыяй і функцыянаваннем прадукта і звязанымі з гэтым небяспекамі.
• Use only with a 12V DC dimmable power supply (sold separately). Ensure the power supply is compatible with LED lighting.
• Не ўносіце змены ў канструкцыю прыбора або яго кампанентаў. Любыя мадыфікацыі могуць ануляваць гарантыю і стварыць пагрозу бяспецы.
• Пазбягайце глядзець непасрэдна ў святлодыёдную крыніцу святла, калі яна падсвятляецца.
• Ensure proper ventilation around the fixture and power supply.
• Захоўваць далей ад лёгкаўзгаральных матэрыялаў.
• This fixture is suitable for dry locations only.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Nora Lighting Josh LED Puck Light (Model NMP-LED30BZ)
• Mounting hardware (screws, clips, etc. - specific hardware may vary)
• Інструкцыя па эксплуатацыі (гэты дакумент)

Note: A 12V DC dimmable power supply is required and sold separately.

Інструкцыя па ўстаноўцы

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture.

Ўразны мантаж

1. Падрыхтуйце адкрыццё: Cut a circular hole in the desired mounting surface. Refer to the specifications section for the exact cutout diameter. Ensure there is sufficient clearance behind the mounting surface for the fixture.
2. Праводка: Route the 12V DC wiring from your power supply to the installation location. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity (positive to positive, negative to negative).
3. Устаўце прыстасаванне: Gently push the puck light into the prepared opening. The spring clips (if present) will secure the fixture in place.

Павярхоўны мантаж

1. Адзначце кропкі мацавання: Position the puck light in the desired location. Mark the screw hole positions on the mounting surface.
2. Secure Mounting Plate/Clips: If a separate mounting plate or clips are provided, secure them to the surface using the supplied screws.
3. Праводка: Route the 12V DC wiring from your power supply. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity.
4. Далучыць прыстасаванне: Secure the puck light to the mounting plate or clips. Ensure the fixture is firmly attached.

Image: The Nora Lighting Josh LED Puck Light in a bronze finish, shown from an angled top-down view. The light features a circular design with a central frosted diffuser and a textured bronze outer ring, suitable for both recessed and surface mounting.

After installation, connect the 12V DC power supply to a suitable power source. Test the light fixture.

Інструкцыя па эксплуатацыі

The Nora Lighting Josh LED Puck Light operates on a 12V DC power supply. Once properly installed and connected to a compatible power source, the light can be controlled via the switch or dimmer connected to your 12V DC power supply.

• Уключэнне/выключэнне: Use the wall switch or inline switch connected to your 12V DC power supply to turn the light on or off.
• Зацямненне: If using a dimmable 12V DC power supply and a compatible dimmer switch, you can adjust the brightness of the puck light. Ensure the dimmer is rated for LED loads.

The LED technology provides instant illumination without flicker, delay, or warm-up time.

Тэхнічнае абслугоўванне

The Nora Lighting Josh LED Puck Light requires minimal maintenance.

• Уборка: Адключыце электрычнасць перад чысткай. Выкарыстоўвайце мяккую, сухую або злёгку змочаную губку.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or optical components.
• Даўгавечнасць святлодыёда: The integrated LED light source is designed for long life and does not require replacement.
• агляд: Periodically inspect the wiring and connections for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified electrician.

Ліквідацыю непаладак

If troubleshooting steps do not resolve the issue, contact Nora Lighting customer support or a qualified electrician.

Тэхнічныя характарыстыкі

Note: Dimensions for cutout and fixture size are not provided in the source data. Please refer to product packaging or Nora Lighting's official webсайт для дакладных вымярэнняў.

Гарантыя і падтрымка

For warranty information, technical support, or to inquire about replacement parts, please contact Nora Lighting directly through their official webсайт або каналы абслугоўвання кліентаў.

Калі ласка, захавайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.