Caso Design HW.500

Caso Design HW.500 Touch Turbo Hot Water Dispenser

Кіраўніцтва па эксплуатацыі

Model: HW.500 | Brand: Caso Design

Уводзіны

The Caso Design HW.500 Touch Turbo Hot Water Dispenser is engineered for efficiency and convenience, providing hot water to your desired temperature in seconds. This manual provides essential information for the safe and effective use of your appliance.

Асноўныя характарыстыкі:

  • Heats water to a boil (212°F) in approximately 8 seconds.
  • Equipped with a powerful 1800-watt heating element.
  • Intuitive sensor-touch control panel for ease of use.
  • Offers 6 adjustable temperatures for various beverages.
  • Features 4 adjustable cup sizes to accommodate different needs.
Caso Design HW.500 Hot Water Dispenser, angled view

Малюнак 1: Пад вуглом view of the Caso Design HW.500 Hot Water Dispenser.

Настройка

  1. Распакаванне: Carefully remove all packaging materials and inspect the dispenser for any damage. Retain packaging for future transport if needed.
  2. Размяшчэнне: Размяшчайце прыладу на ўстойлівай, роўнай, цеплаўстойлівай паверхні, удалечыні ад прамых сонечных прамянёў і крыніц цяпла. Забяспечце дастатковую вентыляцыю вакол прылады.
  3. Першапачатковая ўборка: Before first use, clean the water tank and drip tray with warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the unit with a damp тканіна.
  4. Ўстаноўка бака для вады: Fill the removable water tank with fresh, cold tap water up to the MAX line. Ensure the water filter is correctly inserted into the tank. Place the filled water tank securely onto the base of the dispenser.
  5. Падключэнне сілкавання: Падключыце шнур сілкавання да заземленай электрычнай разеткі. Дысплей загарыцца, паказваючы, што прылада гатовая да выкарыстання.
  6. Цыкл першага выкарыстання: It is recommended to run at least two full cycles of hot water (at the highest temperature setting) without consuming the water to flush out any manufacturing residues.
Caso Design HW.500 Hot Water Dispenser with water tank visible

Малюнак 2: бок view showing the transparent water tank with water level markings.

Інструкцыя па эксплуатацыі

  1. Уключэнне: Ensure the dispenser is plugged in and the water tank is filled. The digital display will show the current status.
  2. Выберыце тэмпературу: Use the temperature selection buttons on the sensor-touch control panel to choose your desired water temperature. Available temperatures typically range from 100°F to 212°F (boiling).
  3. Select Cup Size (if applicable): If your model supports adjustable cup sizes, use the corresponding buttons to select the volume of water to dispense.
  4. Дазаваць ваду: Place a cup or container on the drip tray. Press the dispense button. The unit will rapidly heat and dispense the selected amount of water at the chosen temperature.
  5. Спыніць выдачу: To stop dispensing water before the selected volume is reached, press the dispense button again.
  6. Замак бяспекі: Some models include a safety lock feature. Refer to the display icons for activation and deactivation to prevent accidental dispensing.
Close-up of the Caso Design HW.500 control panel with digital display and touch buttons

Малюнак 3: падрабязна view of the sensor-touch control panel for temperature and dispense settings.

Тэхнічнае абслугоўванне

Уборка

  • Знешні выгляд: Працярыце знешні выгляд мяккай, damp тканінай. Не выкарыстоўвайце абразіўныя ачышчальныя сродкі і не апускайце прыладу ў ваду.
  • Паддон для капель: Regularly empty and clean the drip tray. It is removable for easy cleaning.
  • Рэзервуар для вады: Clean the water tank periodically with warm, soapy water. Rinse thoroughly to remove all soap residue.
Removable drip tray of the Caso Design HW.500 Hot Water Dispenser

Figure 4: The removable drip tray for easy cleaning and maintenance.

Удаленне лускаў

Mineral deposits (limescale) can build up over time, affecting performance. Descale your dispenser regularly, especially in areas with hard water.

  • Use a commercial descaling solution suitable for hot water dispensers, following the manufacturer's instructions.
  • Акрамя таго, можна выкарыстоўваць раствор белага воцату і вады (у суадносінах 1:1).
  • Run the descaling solution through the unit, then rinse by running several cycles of fresh water.

Замена фільтра

The water filter should be replaced according to the manufacturer's recommendations or if you notice a decrease in water quality or flow rate. Refer to the filter packaging for specific instructions.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Вада не падаецца.Рэзервуар для вады пусты або няправільна ўсталяваны.Fill water tank or ensure it is correctly installed.
Вада недастаткова гарачая.Incorrect temperature setting. Limescale buildup.Adjust temperature setting. Descale the unit.
Павольны паток вады.Limescale buildup. Clogged filter.Descale the unit. Replace the water filter.
Прылада не ўключаецца.Not plugged in. Power outage.Check power connection. Verify power supply.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
МаркаДызайн Caso
Нумар мадэліHW.500
Памеры прадукту (Д х Ш х У)10.7" x 6.6" x 12.05"
ЁмістасцьApproximately 4.6 Pounds (equivalent to 2.1 Liters)
КолерЧорны
МатэрыялПластыкавыя
Ватtage1800 ват
тtage120 вольт
Увод чалавечага інтэрфейсуСэнсарны экран
Тып фільтраШматразовы
Уключаныя кампанентыHot water dispenser, 1 water filter, manual, warranty
Dimensions of the Caso Design HW.500 Hot Water Dispenser

Figure 5: Product dimensions for placement and space planning.

Гарантыя і падтрымка

This Caso Design HW.500 Hot Water Dispenser comes with a 12 месяцаў абмежаванай гарантыі з даты пакупкі. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

For technical support, service, or to inquire about replacement parts, please contact Caso Design customer service. You can find contact information and additional resources on the official Caso Design webна сайце або праз вашага прадаўца.

Наведайце ст Крама дызайну Caso для атрымання дадатковай інфармацыі.

© 2026 Caso Design. Усе правы абаронены.