Аўтаматычны дазатар сумесі Baby Brezza Formula Pro FRP0046, кіраўніцтва карыстальніка

1. Прадукт скончыўсяview

The Baby Brezza Formula Pro FRP0046 is an innovative appliance designed to automatically prepare warm formula bottles for infants. It precisely measures, heats, and mixes water and formula powder to the perfect consistency and temperature, saving time and effort for caregivers.

Малюнак 1: Фронт view of the Baby Brezza Formula Pro FRP0046, showcasing the control panel, formula powder container, and dispensing area.

• Works with most major baby formula brands.
• Features a built-in instant heat system for precise temperature control.
• Compact design with dimensions of 18.4 x 14.8 x 10 inches.
• Item weight: 9.6 ounces.

2. Інфармацыя па бяспецы

• Always read all instructions before use.
• Захоўвайце прыбор у месцах, недаступных дзецям.
• Пераканайцеся, што прыбор размешчаны на ўстойлівай роўнай паверхні.
• Не апускайце базавы блок у ваду ці іншыя вадкасці.
• Use only filtered or distilled water for formula preparation.
• Regularly clean all removable parts to prevent bacteria growth and ensure proper function.

3. Кампаненты

The Baby Brezza Formula Pro consists of several key components:

• Formula Powder Container: Holds the dry formula powder.
• Рэзервуар для вады: Holds the water for mixing.
• Панэль кіравання: Features buttons for power, temperature, ounce selection, and powder setting.
• Dispensing Funnel: Where the mixed formula is dispensed.
• Drip Tray/Bottle Platform: Adjustable platform to hold various bottle sizes.

4. Настройка

4.1 Распакаванне

Асцярожна выміце ўсе кампаненты з упакоўкі. Захавайце ўпакоўку для наступнага захоўвання або транспарціроўкі.

4.2 Першасная ўборка

Before first use, wash all removable parts (formula powder container, lid, mixing parts, water tank, drip tray, and dispensing funnel) with warm soapy water, rinse thoroughly, and allow to air dry completely. Wipe the base unit with a damp тканіна.

4.3 Напаўненне рэзервуара для вады

Remove the water tank from the back of the machine. Fill it with filtered or distilled water up to the MAX line. Reattach the water tank securely to the base unit.

Малюнак 2: Назад view of the Baby Brezza Formula Pro FRP0046, showing the removable water tank with MAX/MIN fill lines.

4.4 Adding Formula Powder

Open the lid of the formula powder container. Pour your chosen formula powder into the container, ensuring it stays between the MIN and MAX lines. Close the lid securely. The machine's display will indicate if the lid is not properly closed.

4.5 Setting Powder Ratio

The correct powder setting is crucial for accurate formula preparation. Refer to the Baby Brezza website's 'Formula Pro Settings Finder' to determine the specific setting for your formula brand and type. Press the 'powder setting' button on the control panel to adjust the setting as needed.

4.6 Наладжванне тэмпературы

Press the 'temp' button to cycle through the available temperature options (e.g., room temperature, body temperature, warmer). Select the desired temperature for your baby's bottle.

5. Аперацыя

5.1 Dispensing Formula

1. Place a clean baby bottle on the adjustable drip tray. Ensure the bottle is centered under the dispensing funnel.
2. Press the 'ml/oz' button to select the desired amount of formula (e.g., 60ml, 120ml, 210ml).
3. Press the 'Start' button. The machine will dispense the formula.
4. Once dispensing is complete, remove the bottle, cap it, and gently shake to ensure thorough mixing. Always check the temperature before feeding your baby.

5.2 Dispensing Water Only

If you need warm water only (e.g., for mixing pre-measured formula powder or other uses), press the 'water only' button, select the desired amount, and press 'Start'.

6. Чыстка і тэхнічнае абслугоўванне

Regular cleaning is essential for hygiene and optimal performance of your Baby Brezza Formula Pro.

6.1 Daily Cleaning (Dispensing Funnel)

The dispensing funnel should be cleaned after every 4 bottles dispensed. Remove the funnel by pulling it out. Wash it with warm soapy water, rinse thoroughly, and dry completely before reinserting. The machine will prompt you when cleaning is due.

6.2 Weekly Cleaning (Water Tank, Formula Container, and other parts)

At least once a week, or more frequently if needed, perform a thorough cleaning:

• Empty any remaining formula powder from the container.
• Disassemble the formula powder container, lid, and mixing parts.
• Зніміце рэзервуар для вады і выліце рэшткі вады.
• Wash all disassembled parts with warm soapy water, rinse thoroughly, and allow to air dry completely.
• Працярыце вонкавы бок базавага блока рэкламайamp тканіна.
• Перад паўторнай зборкай пераканайцеся, што ўсе дэталі цалкам сухія.

7. Выпраўленне непаладак

• Machine not dispensing: Check if the water tank is filled, the formula container lid is closed, and the dispensing funnel is clean and properly inserted. Ensure the bottle is pushed all the way back on the drip tray.
• Formula consistency issues: Verify that the correct powder setting is selected for your specific formula brand and type. Ensure the dispensing funnel is clean and free of clogs.
• Паведамленні пра памылкі: Refer to the Baby Brezza user manual for a complete list of error codes and their solutions.

8. Тэхнічныя характарыстыкі

Малюнак 3: Збоку view of the Baby Brezza Formula Pro FRP0046, illustrating its compact size and design.

9. Гарантыя і падтрымка

For warranty information, product registration, or technical support, please visit the official Baby Brezza webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Baby Brezza Official Webсайт: www.babybrezza.com