Уводзіны
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Monitor Wall Mount. Designed for optimal viewing flexibility, this mount supports 13-42 inch LED LCD flat and curved screen TVs and monitors weighing up to 44 lbs, with VESA mounting patterns up to 200x200mm. Its full motion capabilities allow for tilting, swiveling, extension, and rotation, enhancing your viewing experience and saving space.
Figure 1: Pipishell Full Motion TV Monitor Wall Mount Bracket.
Інфармацыя па бяспецы
Please read all instructions carefully before installation. Incorrect installation may result in property damage or personal injury. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.
- Пераканайцеся, што паверхня для мацавання можа бяспечна вытрымаць сумарную вагу мацавання і дысплея.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, solid concrete, or brick wall.
- Use all provided hardware. Do not use the concrete anchors for drywall installation.
- Always have at least two people for installation, especially when lifting the display.
- Не дапускайце дзяцей і хатніх жывёл падчас ўстаноўкі.
- Перыядычна правярайце ўсе злучэнні, каб пераканацца ў іх надзейнасці.
Figure 2: Illustration of compatible wall types for mounting: single wood stud, solid concrete, and brick wall. A crucial warning indicates that the mount should not be installed on drywall alone.
Змест пакета
Before beginning installation, verify that all parts are present and undamaged. If any parts are missing or defective, contact Pipishell customer service.
Figure 3: All components included in the package: the wall plate, TV brackets, instruction manual, and various bags of screws, spacers, and anchors for different installation needs.
- Зборка насценнай пласціны
- Кранштэйны для тэлевізара (x4)
- Кіраўніцтва па эксплуатацыі
- Assorted Screws, Washers, and Spacers for TV/Monitor attachment
- Lag Screws and Concrete Anchors for wall mounting
- Ален Ключы
Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Памеры прадукту | 9.61 х 6.22 х 2.4 цалі |
| Вага прадмета | 2.82 фунта |
| Нумар мадэлі тавару | ПІСФ1 |
| Тып мацавання | Насценнае мацаванне |
| Тып руху | Swivel, Tilt, Extension, Rotation |
| Матэрыял | Легаваная сталь |
| Максімальны сумяшчальны памер | 42 цалі |
| Мінімальны сумяшчальны памер | 13 цалі |
| Максімальная грузападымальнасць | 44 фунта |
| Max VESA Mounting Holes Spacing | 200 х 200 мм |
| Min VESA Mounting Holes Spacing | 75 х 75 мм |
| Кут нахілу | +9°/-11° |
| Кут павароту | Up to 90° (depends on screen size) |
| Пашырэнне ад сцяны | ад 2.7 да 14.59 цаляў |
| Кручэнне | 360° |
Figure 4: Detailed VESA mounting patterns supported by the mount, including 100x100mm, 75x75mm, 100x200mm, 200x100mm, and 200x200mm, along with screen size and max load capacity.
Настройка і ўстаноўка
This section guides you through the process of securely mounting your TV or monitor. It is recommended to have assistance during installation.
1. Праверце сумяшчальнасць
Before starting, ensure your TV or monitor meets the following criteria:
- Памер экрана: Between 13 and 42 inches.
- Вага: Да 20 кг (44 фунтаў).
- Шаблон VESA: Compatible with 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.
2. Choose Your Wall Type
Гэта мацаванне прызначана для ўстаноўкі на:
- Single Wood Stud
- Суцэльная бетонная сцяна
- Цагляная сцяна
3. Installation Steps (Single-Stud Exampле)
The following steps outline a typical single-stud installation. Refer to the included instruction manual for detailed steps for all wall types.
- Step 1: Mount Wall Plate. Position the wall plate on your chosen wall location, ensuring it is level and aligned with a wood stud. Mark and drill pilot holes, then secure the wall plate using the appropriate lag screws.
- Step 2: Attach TV Brackets. Secure the TV brackets to the back of your TV or monitor using the correct screws and spacers from the hardware kit, matching your display's VESA pattern.
- Step 3: Hang TV. Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Ensure the TV is securely seated and locked into place.
Figure 5: Visual guide for the three main steps of single-stud installation: mounting the wall plate, attaching TV brackets, and hanging the TV onto the mount.
Інструкцыя па эксплуатацыі
Your Pipishell Full Motion TV Mount offers various adjustments for optimal viewныя вуглы.
- Рэгуляванне нахілу: The mount allows for a tilt range of +9° (upward) to -11° (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt bolts, adjust to the desired angle, and then re-tighten securely.
- Рэгуляванне павароту: Swivel your display up to 90° left or right, depending on your screen size, to direct the screen towards your seating position. Gently push or pull the display to the desired angle.
- Падаўжэнне і ўцягванне: Размясціце тэлевізар ад сцяны на адлегласць да 14.59 цаляў для бліжэйшага размяшчэння. viewing or retract it back to 2.7 inches to save space when not in use.
- Кручэнне: Rotate the screen 360° to switch between landscape and portrait orientation. This feature is particularly useful for computer monitors.
Figure 6: Demonstrates the 360-degree rotation feature for changing screen orientation and the ±90-degree swivel capability for flexible viewныя вуглы.
Figure 7: Illustrates the tilt function (+9°/-11°) to reduce glare and the extension/retraction feature (extends 14.59", retracts 2.7") for space-saving.
Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і бяспечную працу вашага тэлевізара.
- Уборка: Працірайце мацаванне мяккай сухой тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
- Праверце злучэнні: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
- змазка: If the articulating arm or swivel points become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.
Ліквідацыю непаладак
If you encounter any issues with your Pipishell TV mount, refer to the common problems and solutions below.
- Mount feels wobbly after installation:
- Ensure the mount is installed into a solid structural support (wood stud, concrete, or brick), not just drywall.
- Verify all lag screws securing the wall plate to the wall are fully tightened.
- Check that the TV brackets are securely attached to the TV and properly hooked onto the wall plate.
- Цяжкасці з рэгуляваннем нахілу або павароту:
- For tilt adjustment, ensure the tilt bolts on the TV plate are loosened before attempting to adjust, and re-tighten them afterward.
- For swivel, ensure no cables are snagged or restricting movement.
- If movement is stiff, apply a small amount of silicone lubricant to the pivot points.
- Тэлевізар не стаіць роўна:
- Check the level of the wall plate during installation. Minor adjustments can often be made by slightly loosening and re-tightening the screws on the TV brackets where they attach to the mount.
- Адсутныя часткі:
- Refer to the "Package Contents" section and contact Pipishell customer service immediately for replacement parts.
Гарантыя і падтрымка
Pipishell stands behind the quality of its products. This TV wall mount is constructed from high-quality steel materials.
- Гарантыя: We provide a 5-year friendly customer service for this product.
- Абслугоўванне кліентаў: If you have any questions, concerns, or require assistance with your product, please feel free to contact us anytime. Refer to the contact information provided in the original product packaging or on the Pipishell official webсайт для падтрымкі.
