Уводзіны
This manual provides instructions for the HFBTE Rotational Viscometer Adapter. This adapter is designed to be used with NDJ-1, NDJ-5S, NDJ-8S, and NDJ-9S viscosity meters, expanding their measurement capabilities. It includes rotor types 1#, 2#, 3#, and 4# for various viscosity ranges. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Прадукт скончаныview
The HFBTE Rotational Viscometer Adapter set includes various rotors and components for precise viscosity measurements. The components are typically stored in a protective case.
Відэа прадукту
This video demonstrates the HFBTE Rotational Viscometer Adapter components, showing how each rotor is handled and stored within its protective case.
Настройка
- Распакаванне: Carefully remove all components from the protective case. Inspect for any visible damage.
- Viscometer Preparation: Ensure your compatible viscometer (NDJ-1, NDJ-5S, NDJ-8S, or NDJ-9S) is clean and powered off.
- Rotor Selection: Choose the appropriate rotor (1#, 2#, 3#, or 4#) based on the expected viscosity range of your sample. Refer to your viscometer's manual for rotor-to-viscosity range correlation.
- Attaching the Rotor: Gently screw the selected rotor onto the viscometer's spindle shaft. Ensure it is securely fastened but do not overtighten.
- Выраўноўванне: Confirm the viscometer is level before proceeding with measurements.
Інструкцыя па эксплуатацыі
- SampПадрыхтоўка: Падрыхтуйце сample according to standard laboratory procedures. Ensure the sample is at the desired temperature.
- Апусканне: Carefully lower the viscometer with the attached rotor into the sample. Ensure the rotor is fully immersed and positioned correctly, avoiding contact with the bottom or sides of the sample кантэйнер.
- Уключэнне: Turn on the viscometer.
- Параметры ўстаноўкі: Set the desired rotational speed (RPM) on your viscometer. Consult your viscometer's manual for guidance on appropriate speeds for your sample and rotor combination.
- Вымярэнне: Initiate the measurement process on the viscometer. Allow the reading to stabilize before recording the viscosity value.
- Repeat Measurements: For accuracy, perform multiple measurements and average the results.
- Ачыстка пасля выкарыстання: After completing measurements, turn off the viscometer, carefully remove it from the sample, and proceed to the cleaning steps.
Тэхнічнае абслугоўванне
- Cleaning Rotors: Immediately after use, clean the rotors and adapter components thoroughly with an appropriate solvent that will not damage the materials. Ensure all sample residue is removed.
- Сушка: Dry all components completely before storage to prevent corrosion.
- захоўванне: Store the adapter components back in their protective case in a clean, dry environment, away from direct sunlight and extreme temperatures.
- агляд: Periodically inspect rotors for any signs of wear, bending, or damage. Damaged rotors can lead to inaccurate measurements and should be replaced.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няправільныя паказанні | Incorrect rotor selection; Rotor not clean; Viscometer not level; Sample temperature not stable; Rotor damaged. | Verify rotor type for sample viscosity; Clean rotor thoroughly; Ensure viscometer is level; Stabilize sample temperature; Inspect and replace damaged rotor. |
| Rotor not spinning freely | Rotor touching container sides/bottom; Viscometer spindle bent; Obstruction. | Adjust rotor position in sample; Check viscometer spindle for damage; Remove any obstructions. |
| Difficulty attaching rotor | Threads misaligned or dirty; Overtightened previously. | Clean threads on rotor and spindle; Ensure correct alignment before screwing. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Тыпы ротара | 1#, 2#, 3#, 4# |
| Сумяшчальнасць | NDJ-1, NDJ-4, NDJ-5S, NDJ-8S, NDJ-9S Viscosity Meters |
| Вытворца | HFBTE |
| Уключаныя кампаненты | Viscometer Adapter (set of rotors) |
| Памеры пасылкі | 20 х 12 х 6 см |
| Краіна паходжання | Кітай |
Гарантыя і падтрымка
For warranty information or technical support, please contact your supplier or the manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact details.
вытворца: HFBTE