JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light Instruction Manual

Уводзіны

This manual provides essential instructions for the safe installation, operation, and maintenance of your JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in injury or death.

• Усе электрычныя падключэнні павінны адпавядаць мясцовым нормам і пастановам, Нацыянальнаму электрычнаму кодэксу (NEC) і ANSI/NFPA 70-1999.
• Пракансультуйцеся з кваліфікаваным электрыкам, калі вы не ўпэўнены ў працэсе ўстаноўкі.
• This fixture must be hardwired. Professional installation is recommended.
• Не падключайце гэтую прыладу да незаземленай электрычнай сістэмы.
• Не перавышайце рэкамендаваную ватtagе для цыбулін.
• Перад аднаўленнем харчавання пераканайцеся, што ўсе злучэнні надзейныя.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Мантажная пласціна
• Навес
• Pendant Shades (3)
• Святлодыёдныя лямпы (3)
• Мантажныя элементы (шрубы, гайкі)

Малюнак 1: Закончанаview of the JONATHAN Y Apollo 3-Light LED Pendant Light components and features.

Настройка і ўстаноўка

Professional installation by a qualified electrician is recommended for this hardwired fixture.

1. Выключыць харчаванне: Before starting, ensure the power to the circuit is turned off at the main electrical panel.
2. Падрыхтуйце мантажную пласціну: Attach the mounting plate to the junction box in the ceiling using the provided screws.
3. Adjust Pendant Height: Each pendant's cord length is adjustable. Determine the desired hanging height for each light and secure the cord at the canopy.
4. Правадныя злучэнні: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
5. Прымацаваць навес: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it with the provided screws.
6. Усталяваць лямпы: Screw the included LED bulbs into each pendant socket.
7. Аднавіць сілу: Once installation is complete and all connections are secure, restore power at the main electrical panel.

Figure 2: Key features for installation, including adjustable height and easy assembly.

Інструкцыя па эксплуатацыі

• Уключэнне/выключэнне харчавання: Operate the light using a standard ON/OFF wall switch.
• Функцыя зацямнення: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed and dimmable LED bulbs.
• Рэгуляваная вышыня: The height of each pendant can be adjusted during installation to suit your preference and space requirements.

Тэхнічнае абслугоўванне

• Уборка: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Замена лямпачкі: Ensure power is off before replacing bulbs. Use E26 base LED bulbs, not exceeding 40 watts per bulb.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Figure 3: Detailed dimensions of the pendant light fixture.

Гарантыя і падтрымка

Гарантыя: This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.

For warranty information or support, please contact the internet customer service center.