1. Уводзіны
The WRINERY Pulse Oximeter Fingertip is designed to measure blood oxygen saturation levels (SpO2), pulse rate, and pulse strength. This device is intended for non-medical use, suitable for home and travel. It provides accurate and reliable data before and after strenuous activities. It is ideal for sports enthusiasts, aviators, trainers, bikers, mountain climbers, or anyone interested in monitoring their SpO2 on the go.
Note: This pulse oximeter is not intended for medical diagnosis or treatment.
2. Змесціва ўпакоўкі
Праверце наяўнасць усіх прадметаў у камплекце:
- 1 x WRINERY Finger Oxygen and Heart Rate Monitor
- 1 х шнурок
- 1 х Кіраўніцтва карыстальніка (гэты дакумент)
- 2 х ААА батарэі
- 1 х футляр для пераноскі
Image: Contents of the WRINERY Pulse Oximeter package, showing the device, lanyard, two AAA batteries, and a black carrying case.
3. Настройка
Follow these steps to prepare your pulse oximeter for first use:
- Усталюйце батарэі: Remove the back cover of the device. Insert the two AAA batteries into the battery compartment, ensuring correct polarity (+/-). Replace the back cover.
Image: The WRINERY Pulse Oximeter device shown with its accessories, illustrating the components involved in the initial setup, including the battery compartment.
4. Інструкцыя па эксплуатацыі
To obtain a reading:
- Уставіць палец: Адкрыйце склamp of the oximeter. Insert one of your fingers (preferably the index or middle finger) into the rubber opening, ensuring your fingertip is aligned with the red light sensor.
- Актываваць прыладу: Адпусціце склamp. The device will automatically switch on and begin measurement.
- Вынікі чытання: Remain still. After approximately eight to ten seconds, your SpO2 (blood oxygen saturation) and Pulse Rate (PRbpm) will be displayed on the OLED screen.
For accurate readings, it is recommended to use the device in a stationary condition, avoiding movement during measurement.
Image: A finger being correctly inserted into the WRINERY Pulse Oximeter, highlighting the position for accurate measurement over the red light sensor.
Image: The WRINERY Pulse Oximeter's OLED display, indicating SpO2 value, power indicator, pulse bar graph, operating button, heart beat icon, pulse rate, and pulse waveform.
5. Асаблівасці
- Дакладны і надзейны: Provides precise measurements of blood oxygen levels and pulse rate within 8 seconds.
- Партатыўны дызайн: Compact and lightweight (approximately 65g / 1.95 ounces) with an included lanyard for easy carrying.
- Wide Finger Size Accommodation: Designed to fit a broad range of finger sizes, from children to adults.
- Minimum Power Consumption: Features an automatic power-off function when no finger is detected, extending battery life up to 15 hours with two AAA batteries.
- Crystal Clear OLED Display: Presents reading data on a bright and sharp OLED screen for enhanced visibility in various environments.
6. Тэхнічныя характарыстыкі
| Назва мадэлі | ПІСАЛЬНІЦА |
| Measuring Range SpO2 | 35%~100% |
| Measuring Range Pulse Rate (PR) | 25 BPM ~250 BPM |
| Батарэі | 2 х ААА батарэек (у камплекце) |
| Тэрмін службы батарэі | Да 15 гадзін бесперапыннай працы |
| Тып дысплея | OLED |
| Колер | Чорны |
| Памеры ўпакоўкі | 3.19 х 2.24 х 2.13 цалі |
| Вага | 2.4 ounces (device only approx. 0.5 ounces) |
| Вытворца | Хунань Дакладныя бія-медыцынскія тэхналогіі Co., Ltd. |
| ASIN | B07V3176CB |
7. Тэхнічнае абслугоўванне
Proper maintenance ensures the longevity and accuracy of your device:
- Уборка: Wipe the surface of the oximeter with a soft cloth dampened with medical alcohol or a mild disinfectant. Do not immerse the device in liquid.
- захоўванне: Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity.
- Замена батарэі: Замяняйце батарэйкі, калі на дысплеі з'явіцца індыкатар нізкага зараду батарэй. Калі прылада не будзе выкарыстоўвацца працяглы час, выміце батарэйкі, каб прадухіліць уцечку.
- Пазбягайце ўздзеяння: Handle the device with care to prevent damage from drops or impacts.
8. Выпраўленне непаладак
If you encounter issues with your WRINERY Pulse Oximeter, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Адсутнічае дысплей пасля ўключэння | Батарэі разраджаны або ўсталяваны няправільна. | Replace batteries or re-install them with correct polarity. |
| Недакладныя або нестабільныя паказанні | Finger not inserted properly; movement during measurement; cold fingers; nail polish or artificial nails. | Re-insert finger correctly; remain still; warm hands; remove nail polish/artificial nails. |
| Прылада аўтаматычна выключаецца | No finger detected for a period (normal auto-off function); low battery. | This is normal behavior if no finger is present. If a finger is present, check/replace batteries. |
9. Важная інфармацыя па бяспецы
- This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
- Consult a medical professional for any health concerns.
- Захоўваць у месцах, недаступных для дзяцей. Дробныя дэталі могуць утвараць небяспеку ўдушша.
- Не выкарыстоўвайце прыладу ў асяроддзі МРТ або КТ.
- Do not use the device on the same limb simultaneously with a blood pressure cuff or other monitoring equipment.
10. Гарантыя і падтрымка
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WRINERY webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.