ONKRON G120-BLK Single Monitor Wall Mount Instruction Manual
Model: G120-BLK
Уводзіны
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Інфармацыя па бяспецы
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Не перавышайце максімальную грузападымальнасць 17.6 кг (8 фунтаў).
- This mount is designed for monitors between 13 and 34 inches.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Не дапускайце дзяцей і хатніх жывёл падчас ўстаноўкі.
Змест пакета
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- Талерка VESA
- Насценная пліта
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Шестигранный ключ (6 мм)
- Кіраўніцтва па эксплуатацыі
Настройка і ўстаноўка
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Відэа кіраўніцтва па ўсталёўцы
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Крок 1: Разметка свідравальных адтулін
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Крок 2: Усталёўка мацавання
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Паварот супраць гадзіннікавай стрэлкі for lighter screens (to reduce tension).
- Паварот па гадзіннікавай стрэлцы for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewз камфортам.
- Рэгуляванне вышыні: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Падаўжэнне/Уцягванне: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Нахіл: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewкут нахілу.
- Паваротны: Swivel the monitor 180° left or right.
- Кручэнне: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Кіраванне кабелем
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Выява: Крупны план view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і аптымальную працу вашага мацавання манітора.
- Уборка: Працярыце мацаванне мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў.
- Перыядычныя праверкі: Перыядычна правярайце ўсе шрубы і злучэнні, каб пераканацца, што яны зацягнуты. Пры неабходнасці падцягвайце.
- Рэгуляванне газавай спружыны: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Ліквідацыю непаладак
Звярніцеся да гэтага раздзела, каб знайсці рашэнні распаўсюджаных праблем.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Манітор прагінаецца або не трымаецца на патрэбнай вышыні. | Gas spring tension is too low for the monitor's weight. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Gas spring tension is too high for the monitor's weight. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Мацаванне адчуваецца няўстойлівым або хісткім. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Joints are too tight. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Тэхнічныя характарыстыкі
- мадэль: G120-BLK
- Сумяшчальнасць з памерам экрана: 13 - 34 цалі
- Ёмістасць вагі: 2.2 - 17.6 фунты (1 - 8 кг)
- Сумяшчальнасць VESA: 75х75 мм, 100х100 мм
- Кут нахілу: ад +90° да -45°
- Кут павароту: 180°
- Кручэнне: 360°
- Рэгуляванне вышыні: 11 цаляў (28 см)
- Выцягванне рукі: ад 3.5 цаляў (8.9 см) да 13.7 цаляў (34.8 см)
- матэрыял: Алюміній
- Памеры прадукту: 16.34 х 2.28 х 6.61 цалі (41.5 х 5.8 х 16.8 см)
- Вага прадмета: 3.96 фунта (1.8 кг)
Гарантыя і падтрымка
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON webсайт.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Кантактная інфармацыя: Please refer to the ONKRON webна сайце або ўпакоўцы прадукту, каб атрымаць найбольш актуальную кантактную інфармацыю.