Інструкцыя па эксплуатацыі паваротнага офіснага крэсла TecTake 403238 / 800747

Уводзіны

This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.

Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.

Інструкцыі па тэхніцы бяспекі

To prevent injury or damage to the chair, please observe the following safety guidelines:

• Ensure all components are securely fastened before use. Regularly check and tighten screws.
• Do not exceed the maximum weight capacity of the chair (refer to specifications).
• Пазбягайце стаяць на крэсле або выкарыстоўваць яго ў якасці падстаўкі для ног.
• Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
• Выкарыстоўвайце крэсла на роўнай паверхні, каб пазбегнуць перакульвання.
• Трымайце ўпаковачныя матэрыялы далей ад дзяцей, каб пазбегнуць небяспекі ўдушша.
• Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.

Спіс кампанентаў

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• спінка
• Падушка для сядзення
• Падлакотнікі (левы і правы)
• Mechanism Plate (under seat)
• Газліфтны цыліндр
• Крышка газліфта
• Пяцізоркавая база
• Ролікі (5 штук)
• Крама (шрубы, шайбы, шасцігранны ключ)

Інструкцыя па зборцы

Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Step 1: Attach Casters to the Base

Insert each of the five casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.

Step 2: Insert Gas Lift

Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.

Крок 5: Падлучыце вузел сядзення да газавага пад'ёмніка

Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.

Выява: спераду view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.

Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.

Інструкцыя па эксплуатацыі

Your TecTake office chair offers several adjustments to customize your seating experience:

Рэгуляванне вышыні

To adjust the seat height, locate the lever on the right side, beneath the seat.

• Каб падняць сядзенне: Падніміце рычаг, адначасова здымаючы вагу з сядзення. Сядзенне падымецца аўтаматычна. Адпусціце рычаг на патрэбнай вышыні.
• Каб апусціць сядзенне: Падніміце рычаг, застаючыся на месцы. Сядзенне апусціцца. Адпусціце рычаг на патрэбнай вышыні.

Tilt Function and Lock

The chair features a tilt mechanism allowing the backrest and seat to recline together.

• To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
• Каб зафіксаваць нахіл: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.

Рэгуляванне нацяжэння нахілу

Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.

• To increase tension (harder to recline): Павярніце ручку па гадзіннікавай стрэлцы.
• To decrease tension (easier to recline): Turn the knob counter-clockwise.

Тэхнічнае абслугоўванне

Рэгулярны догляд дапаможа падоўжыць тэрмін службы і знешні выгляд вашага офіснага крэсла.

• Уборка: Абіўку са штучнай скуры працірайце мяккай губкайamp тканінай. Для выдалення ўстойлівых плям выкарыстоўвайце мяккі мыльны раствор і неадкладна вытрыце насуха. Пазбягайце абразіўных ачышчальнікаў, растваральнікаў або агрэсіўных хімічных рэчываў, бо яны могуць пашкодзіць матэрыял.
• Каркас і падстава: Працярыце металічныя і пластыкавыя дэталі рэкламайamp тканіна.
• Ролікі: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
• Абсталяванне: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Пазбягайце перагрузкі: Do not exceed the chair's stated weight capacity.

Ліквідацыю непаладак

Калі ў вас узнікнуць якія-небудзь праблемы з вашым крэслам, звярніцеся да наступных распаўсюджаных праблем і рашэнняў:

• Скрып крэслаў:

  Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
• Крэсла не рэгулюецца па вышыні:

  Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.

• Крэсла адчуваецца няўстойлівым/хісткім:

  Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.

• Ролікі коцяцца не так плаўна:

  Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.

Тэхнічныя характарыстыкі

Памеры (прыблізныя)

Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).

• Overall Height: 115-123 cm
• Seat Height (adjustable): 47-55 cm
• Шырыня сядзення: 55 см
• Глыбіня сядзення: 52 см
• Backrest Width: 48 cm
• Armrest Height (from seat): 68.5-76.5 cm
• Base Diameter: 67 cm

Гарантыя і падтрымка

Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.

Вы можаце наведаць TecTake Brand Store on Amazon для атрымання дадатковай інфармацыі.