OREI 4K HDMI Extender EX-165C+ Instruction Manual

1. Уводзіны

The OREI EX-165C+ HDMI Extender allows for the transmission of a 1080P HDMI signal up to 50 meters (165 feet) using a single Cat5e/6/7 Ethernet cable. This device is compliant with HDMI 1.4 and HDCP 1.4 standards, ensuring compatibility with a wide range of audio-visual equipment. It features a one-way IR pass-through for remote control of source devices, an HDMI loop output on the transmitter for local monitoring, and Power Over Cable (POC) functionality, simplifying installation by requiring power only at the transmitter unit.

2. Што ў скрынцы

• 1 x HDMI Extender Transmitter Unit
• 1 x HDMI Extender Receiver Unit
• 1 х Кабель ВК-бластэра
• 1 х Кабель ВК-прыёмніка
• Адаптар сілкавання 1 х 5 В пастаяннага току
• 1 х Кіраўніцтва карыстальніка

Image: The OREI EX-165C+ HDMI Extender package contents, showing the transmitter and receiver units, IR cables, and power adapter.

3. Прадукт скончыўсяview

3.1 Transmitter Unit (TX)

The transmitter unit connects to your HDMI source device and features an HDMI input, an HDMI loop output for local display, a Cat port for the Ethernet cable, an IR Out port for the IR Blaster, and a DC 5V power input.

Выява: Збоку view of the transmitter unit, highlighting its various ports.

3.2 прыёмнік (RX)

The receiver unit connects to your HDMI display and features an HDMI output, a Cat port for the Ethernet cable, and an IR In port for the IR Receiver. This unit is powered via Power Over Cable (POC) from the transmitter, eliminating the need for a separate power adapter at the display location.

Выява: Збоку view of the receiver unit, highlighting its various ports.

4. Інструкцыі па ўсталёўцы

1. Connect HDMI Source: Connect an HDMI cable from your source device (e.g., PC, game console, Blu-ray player) to the УХОД HDMI port on the Transmitter unit.
2. Connect Local Display (Optional): If local monitoring is desired, connect an HDMI cable from the ВЫХОД HDMI LOOP port on the Transmitter unit to a local HDMI display.
3. Падключэнне кабеля Ethernet: Use a single Cat5e/6/7 Ethernet cable to connect the КОТ port on the Transmitter unit to the КОТ port on the Receiver unit. Ensure the cable is of good quality for optimal performance and distance.
4. Падключыце дысплей HDMI: Падключыце кабель HDMI ад ВЫХАД HDMI port on the Receiver unit to your remote HDMI display (e.g., TV, projector).
5. Connect IR Cables:
   • Connect the IR Blaster cable to the ІЧ-ВЫХОД port on the Transmitter unit and position the IR emitter near the IR sensor of your source device.
   • Connect the IR Receiver cable to the ІЧ уваход port on the Receiver unit and position the IR receiver in a location where it can receive signals from your remote control.
6. Ужыць магутнасць: Падключыце адаптар пастаяннага току 5 В з камплекта да 5 В пастаяннага току port on the Transmitter unit. The Receiver unit will be powered automatically via Power Over Cable (POC).
7. Уключаныя прылады: Power on your HDMI source device and all connected displays. The extender should automatically establish the connection.

Image: A diagram illustrating the connection process for the OREI EX-165C+ HDMI Extender.

Відэа кіраўніцтва па наладзе

Video: A detailed guide on how to set up and use the OREI EX-165C+ HDMI Extender.

5. Інструкцыя па эксплуатацыі

Once properly set up, the OREI EX-165C+ HDMI Extender operates automatically. The HDMI signal from your source device will be transmitted over the Ethernet cable to the remote display. The HDMI loop output on the transmitter allows for simultaneous viewing on a local display.

5.1 IR Pass-Through

The IR pass-through function allows you to control your HDMI source device from the remote display location. Point your remote control at the IR Receiver connected to the Receiver unit. The signal will be transmitted back to the IR Blaster connected to the Transmitter unit, which will then control your source device.

Image: Illustration of the IR transmission feature, showing compatibility with various devices.

5.2 Падтрымоўваныя дазволы

The extender supports a range of HDMI resolutions and frequencies, ensuring high-quality video transmission:

• 480i @ 60 Гц
• 480p пры 60 Гц
• 576i @ 60 Гц
• 576p пры 50 Гц
• 720p @ 50/60Hz
• 1080i @ 50/60Hz
• 1080P @ 50/60Hz

It utilizes M-Jpeg compression for efficient transmission with minimal image quality loss.

6. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your OREI EX-165C+ HDMI Extender, follow these maintenance guidelines:

• Keep the units in a cool, dry place away from direct sunlight, heat sources, and moisture.
• Clean the units with a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Пераканайцеся, што ўсе кабелі надзейна падключаны і не знаходзяцца пад нацяжэннем. Пазбягайце рэзкага згінання кабеляў.
• Periodically check for firmware updates on the OREI website, if available, to ensure the best performance and compatibility.

7. Выпраўленне непаладак

If you encounter issues with your HDMI extender, refer to the following common troubleshooting steps:

• Няма выявы/сігналу:
  • Пераканайцеся, што ўсе кабелі HDMI і Ethernet надзейна падключаны.
  • Verify that the power adapter is correctly connected to the Transmitter unit and that the power indicator light is on.
  • Check if the HDMI source device and display are powered on and set to the correct input.
  • Test the HDMI cables directly between the source and display to rule out cable issues.
  • Ensure the Ethernet cable is a Cat5e/6/7 cable and is not damaged. Try a shorter cable if possible.
  • Reduce the resolution of the source device to see if a signal is established.
• IR Remote Control Not Working:
  • Ensure the IR Blaster is positioned directly over the IR sensor of the source device.
  • Ensure the IR Receiver is positioned to receive signals from your remote control.
  • Check that the IR cables are securely plugged into the correct ports on both the Transmitter and Receiver units.
  • Verify that the remote control itself is functioning correctly (e.g., fresh batteries).
• Poor Picture Quality/Flickering:
  • Use a high-quality Cat6 or Cat7 Ethernet cable, especially for longer distances.
  • Ensure the Ethernet cable is not running parallel to power lines or other sources of electromagnetic interference.
  • Check if the resolution and refresh rate of the source device are within the supported specifications of the extender and display.

8. Тэхнічныя характарыстыкі

Image: Detailed technical specifications and dimensions of the extender units.

9. Гарантыя і падтрымка

For warranty information and technical support, please contact OREI directly. You can reach them via email at info@orei.com. Please refer to the official OREI website or the product packaging for the most up-to-date warranty terms and conditions.