1. Прадукт скончыўсяview
The Diyeeni Photocell Switch is an automatic lighting control device designed to activate or deactivate lighting based on ambient illumination levels. It features a three-wire system for compatibility and offers energy-saving benefits, extended operational life, and reliable performance. This switch is ideal for applications requiring automatic light switching in low visibility conditions, such as outdoor lighting, LED installations, and monitoring systems.
Малюнак 1.1: Photocell switch integrated into an outdoor lighting setup, demonstrating its application in automatic light control for LED lighting, outdoor monitoring, and garden lights.
Асноўныя характарыстыкі:
- Automatic illumination detection circuit for dusk-to-dawn operation.
- Energy-saving design with long operational life.
- Three-wire system for broad compatibility.
- Suitable for LED lighting and various outdoor automatic switching applications.
Малюнак 1.2: Падрабязны view of the mini light switching sensor, highlighting its compact design and the integrated photocell for automatic light detection. This sensor is designed for energy efficiency, long life, and reliable performance.
2. Настройка і ўстаноўка
Proper installation is crucial for the optimal performance and safety of your photocell switch. Please follow these instructions carefully.
2.1 Інструкцыі па падключэнні
The photocell switch utilizes a three-wire system. Ensure all power is disconnected before attempting any wiring.
Малюнак 2.1: This image displays the wiring diagram and physical dimensions of the photocell switch. The label indicates connections for Red (Load), White (Line), and Black (Line). Dimensions are approximately 40mm (length) x 15.6mm (width) x 20mm (height).
- Чырвоны провад: Connect to the Load (e.g., light fixture).
- Белы дрот: Connect to the Neutral Line.
- Чорны провад: Connect to the Live Line.
The leads length is approximately 150mm.
Малюнак 2.2: Буйны план view of the red, white, and black wires extending from the photocell switch, illustrating the three-wire system for electrical connection.
2.2 Мантаж
The photocell switch is designed for wall mount installation. Ensure the sensor is positioned where it can accurately detect ambient light without obstruction from artificial light sources or shadows.
2.3 Экалагічныя меркаванні
- The device has an International Protection Rating of IP66, indicating it is dust-tight and protected against powerful water jets.
- Operating environment temperature range: -25°C to 70°C (-13°F to 158°F).
- Avoid installation in corrosive gas environments.
2.4 Варыяцыі прадукту
Please note that both new and old types of this product may be shipped. Functionality remains consistent across both versions.
Малюнак 2.3: This image shows a comparison between the 'New Type' and 'Old Type' models of the photocell switch, illustrating minor aesthetic differences while maintaining core functionality.
3. Інструкцыя па эксплуатацыі
The Diyeeni Photocell Switch operates automatically based on ambient light conditions.
3.1 Аўтаматычная праца
- The switch will automatically turn ON when the ambient light level falls between 5-10 Lux (LX).
- The switch will automatically turn ВЫКЛ when the ambient light level rises between 30-60 Lux (LX).
- An anti-interference delay of approximately 0.6 seconds is built-in to prevent rapid switching due to momentary light fluctuations.
3.2 Метад кіравання
The device is listed with a 'Remote' control method and 'Wi-Fi' connectivity protocol. For specific details on remote control functionality or Wi-Fi setup, please refer to additional product documentation or contact customer support.
4. Тэхнічнае абслугоўванне
The Diyeeni Photocell Switch is designed for long-term, reliable operation with minimal maintenance.
4.1 Агульны догляд
- Periodically inspect the sensor lens for dirt, dust, or obstructions. Clean gently with a soft, dry cloth if necessary.
- Ensure the wiring connections remain secure and free from corrosion.
- Avoid exposing the device to harsh chemicals or abrasive materials.
4.2 Expected Lifespan
The working life of the photocell switch is rated for approximately 6500 cycles.
5. Выпраўленне непаладак
If you encounter issues with your photocell switch, refer to the following common problems and solutions.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не ўключаецца ў змярканні. | Insufficient darkness detected; sensor obstructed; power issue; faulty wiring. | Ensure sensor is not exposed to artificial light. Check for physical obstructions on the sensor. Verify power supply and wiring connections. |
| Light does not turn OFF at dawn. | Insufficient light detected; sensor obstructed; faulty wiring. | Ensure sensor is exposed to natural daylight. Check for physical obstructions on the sensor. Verify wiring connections. |
| Light flickers or cycles rapidly. | Momentary light fluctuations; sensor interference. | The built-in anti-interference delay should mitigate this. If persistent, check for external light sources causing rapid changes near the sensor. |
| Няма харчавання на перамыкачы. | Power supply issue; incorrect wiring. | Check the circuit breaker. Verify all wiring connections are correct and secure. |
6. Тэхнічныя характарыстыкі
Detailed technical specifications for the Diyeeni Photocell Switch.
Малюнак 6.1: Бокавы профіfile of the photocell switch, showing its compact form factor and the entry point for the three-wire system.
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | Diyeeniimx8vn0s5g |
| Рэжым працы | Automatic (Dusk to Dawn) |
| тtagе далёкасць | 12V, 24V, 36V, 48V DC |
| Пастаўка Voltage (аперацыйная) | Ад 8 В да 50 В пастаяннага току |
| Бягучы рэйтынг | 5 Amps (Load Current) |
| Ток у рэжыме чакання | 0.5mA (silent state) |
| Энергаспажыванне | 0.6 Вт максімум |
| Anti-interference Delay | Прыкладна 0.6 секунд |
| Sensitivity (ON) | 5-10 Lux (LX) |
| Sensitivity (OFF) | 30-60 Lux (LX) |
| Тэмпература навакольнага асяроддзя | -25°C да 70°C (-13°F да 158°F) |
| Адносная вільготнасць | 99% адноснай вільготнасці |
| Працоўнае жыццё | 6500 цыклаў |
| Detector Grade (IP Rating) | IP66 |
| Тып мацавання | Насценнае мацаванне |
| Метад кантролю | Дыстанцыйнае |
| Пратакол злучэння | Wi-Fi |
| Leads Length | 150 мм |
| Памер прадукту (Д х Ш х У) | 40 x 15.6 x 20 мм (1.57" x 0.61" x 0.79") |
| Вага прадмета | 0.704 унцыі |
| Матэрыял | Фотаэлемент |
Малюнак 6.2: Фронт view of the photocell switch, showing the light-sensing element and the threaded collar for secure mounting.
7. Гарантыя і падтрымка
For warranty information, technical support, or any inquiries regarding your Diyeeni Photocell Switch, please refer to the product packaging or contact Diyeeni customer service directly. Contact details can typically be found on the manufacturer's webна сайце або праз месца пакупкі.