Кіраўніцтва карыстальніка 3D-лазернага ўзроўню POPOMAN MTM350B

1. Інфармацыя па бяспецы

Please read and understand all safety information before operating this laser level. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Лазернае выпраменьванне: This product emits Class II laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
• Крыніца харчавання: Use only the specified charging cable and wall charger. Ensure the power source matches the device's requirements.
• Бяспека акумулятара: The device uses a 5200mAh lithium battery. Do not disassemble, short-circuit, or expose the battery to high temperatures or fire. Dispose of batteries properly.
• Асяроддзе: Operate the device in a clean, dry environment. Avoid exposure to water, dust, and extreme temperatures. The device has an IP54 rating for splash and dust resistance, but it is not fully waterproof.
• Дзеці і хатнія жывёлы: Keep the laser level out of reach of children and pets.
• Тэхнічнае абслугоўванне: Не спрабуйце абслугоўваць прыладу самастойна. Звяртайцеся да кваліфікаванага персаналу.

2. Прадукт скончыўсяview

The POPOMAN MTM350B is a versatile 3D laser level designed for various leveling and alignment tasks. It projects three 360° green laser lines (two vertical, one horizontal) for comprehensive coverage. Its robust design and rechargeable battery make it suitable for both professional and home use.

2.1 Змест пакета

• 1 x POPOMAN MTM350B 3D Laser Level
• 1 х кабель для зарадкі USB-C
• 1 х насценнае зарадная прылада
• 1 x 5200mAh Rechargeable Lithium Battery
• 1 x Magnetic Pivoting Base
• 1 x Auxiliary Supporting Bracket
• 1 х Кіраўніцтва карыстальніка
• 1 х чахол

Figure 2.1: Complete package contents of the MTM350B laser level.

2.2 Характарыстыкі прадукту

• 3 x 360° Green Laser Lines: Provides one horizontal and two vertical lines for full room coverage.
• Высокая бачнасць: Green laser is significantly brighter than red lasers, improving visibility in various lighting conditions.
• Рэжым самавыраўноўвання: Automatically levels within ±4° ±1° range, indicating out-of-level conditions.
• Ручной рэжым: Locks the pendulum for projecting lines at any angle.
• Імпульсны рэжым: Extends working distance up to 197ft (60m) with a laser receiver (not included).
• Доўгі тэрмін службы батарэі: Equipped with a 5200mAh rechargeable lithium battery for up to 8 hours of continuous operation.
• Зарадка USB-C: Convenient charging via USB-C, with overcharge protection.
• Трывалы дызайн: IP54 rated for water and dust resistance, covered by TPR soft rubber for shock protection.
• Універсальны мантаж: Includes magnetic pivoting base and auxiliary supporting bracket, with 1/4''-20 tripod thread.

Figure 2.2: Key features of the POPOMAN MTM350B laser level.

2.3 Ідэнтыфікацыя дэталяў

Figure 2.3: Labeled components of the MTM350B laser level.

• Laser ON/OFF Switch: Controls the laser beam activation.
• All-Inclusive Soft Rubber (IP54): Provides durability and protection against dust and splashes.
• Порт для зарадкі USB: Для падключэння зараднага кабеля USB-C.
• Replaceable Battery Compartment: Houses the 5200mAh lithium battery.
• Замак маятніка: Used to switch between self-leveling and manual modes, and to secure the pendulum during transport.
• 1/4"-20 Screw Hole: For mounting the device on a tripod or other compatible accessories.

3. Настройка

3.1 Распакоўка і першапачатковы агляд

Carefully remove all components from the carry case. Inspect the laser level and accessories for any signs of damage. Ensure all listed package contents are present.

3.2 Усталёўка і зарадка акумулятара

The MTM350B comes with a 5200mAh rechargeable lithium battery. Before first use, remove the protective film from the battery and fully charge it.

1. Адкрыйце вечка батарэйнага адсека збоку лазернага ўзроўню.
2. Insert the 5200mAh lithium battery, ensuring correct polarity.
3. Надзейна зачыніце крышку батарэйнага адсека.
4. Connect the USB-C charging cable to the laser level's charging port and the other end to the wall charger.
5. Plug the wall charger into a power outlet. The battery indicator on the device will show charging status.
6. The device can also operate while connected to a power source directly without the battery.

Figure 3.1: The laser level can be charged via car charger, power bank, laptop, or AC adapter.

3.3 Варыянты мантажу

The MTM350B offers flexible mounting solutions for various applications.

• Magnetic Pivoting Base: Attach the laser level to the magnetic pivoting base using the 1/4"-20 screw hole. This base allows for attachment to metal surfaces and provides rotational adjustment.
• Auxiliary Supporting Bracket: Use this bracket for additional support or to clamp the laser level to various surfaces.
• Мацаванне штатыва: The 1/4"-20 screw hole on the bottom of the laser level is compatible with standard tripods (not included).

Figure 3.2: The laser level can be mounted using an adjustable clip, magnetic adsorption, or hang buckle design.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне

To power on the device, slide the pendulum lock switch to the unlocked position. To power off, slide the pendulum lock switch back to the locked position.

4.2 Рэжым саманівеліравання

When the pendulum lock switch is in the unlocked position, the laser level will automatically self-level. If the device is outside its self-leveling range (±4° ±1°), the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the device's position until the lines stabilize.

4.3 Manual Mode (Slope Function)

To project lines at a specific angle, engage the manual mode:

1. Slide the pendulum lock switch to the locked position.
2. Press and hold the power button for a few seconds until the laser lines activate without self-leveling. The lines will remain static, allowing for angled projection.
3. To exit manual mode, slide the pendulum lock switch to the unlocked position, then back to locked, or power off the device.

4.4 Імпульсны рэжым

Pulse mode is used to extend the working range of the laser level when using an optional laser receiver (not included). This is particularly useful for outdoor applications or in bright conditions.

1. Ensure the laser level is in self-leveling mode (pendulum unlocked).
2. Press the 'P' button (Pulse Mode button) on the control panel. The laser lines will begin to pulse, and the pulse mode indicator will light up.
3. Align the laser receiver with the pulsing laser line.
4. To deactivate pulse mode, press the 'P' button again.

4.5 Пераключэнне лазерных ліній

The MTM350B allows you to activate different combinations of laser lines:

• Press the power button briefly to cycle through the available laser line combinations (e.g., horizontal only, vertical only, all lines).

Figure 4.1: The laser level supports five different line modes for various applications.

4.6 Дадаткі

The 3D laser lines are ideal for a wide range of tasks:

• Мантаж падлогі: Project horizontal lines for accurate tile laying or flooring installation.
• Wall Decoration: Use vertical and horizontal lines for hanging pictures, shelves, or wallpaper.
• Мантаж столі: Project lines onto the ceiling for light fixture placement or ceiling decoration.
• Partitioning: Create precise layouts for installing partitions, screens, or door panels.

Малюнак 4.2: Выпamples of the laser level's use in floor installation, furniture assembly, picture hanging, and tile work.

Figure 4.3: The laser level assists in precise alignment for tasks like wallpapering and staircase renovations.

5. Тэхнічнае абслугоўванне

• Уборка: Regularly clean the laser windows and the device body with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• захоўванне: When not in use, store the laser level in its original carry case in a dry, cool place, away from direct sunlight. Ensure the pendulum lock is engaged before storage or transport.
• Сыход за батарэяй: For long-term storage, charge the battery to approximately 50% and recharge every 3-6 months to maintain battery health.
• Каліброўка: If you suspect the laser level is out of calibration, refer to the troubleshooting section or contact customer support. Do not attempt to recalibrate the internal components yourself.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

POPOMAN provides a 2-year quality promise for the MTM350B laser level. For warranty claims, technical support, or any questions regarding your product, please contact POPOMAN customer service through the official webсайт або ваша платформа для пакупак.

Для атрымання дадатковай інфармацыі і падтрымкі наведайце: www.popomantools.com